CRAFTLINE Cabinetry Drawer Box Assembly User manual

Craftline Drawer Box Assembly

STEP 1
Attach drawer box sides to the drawer box back connecting at the finger joints.
Slide the drawer box bottom into grooves along drawer sides.
Attach drawer head to drawer sides connecting at the finger joints.
STEP 2
Flip drawer box over and attach drawer box clips to the
front corners of the box with (6) 1” flat head screws.
STEP 3
Install (2) side mount glides by placing (2) slide mount wall brackets in pre-
drilled hole locations on back panel. Then slide the metal glides onto the
brackets. Once aligned with the front face frame, attach front of glides with
(8) ½” flat head screws.
STEP 4
Flip drawer box right side up and slide
onto extended side mount drawer glides.
Push drawer box in till you hear a click.