CRAFTLINE CLB12WH User manual

Modern Builders Supply
Craftline Cabinet Assembly
Base Cabinet

Tools to Assist
- Rubber Mallet
-Wood Glue
-Drill
- Clamps

Hardware Parts List
•Cleats (Beige L-Shape Bracket) x 10
•Door Hinges x 2
•Shelf Clips (Silver) x 2
•Slide Mount Wall Brackets (Black) x 2
•Ball Bearing Side Mount Drawer Glides x 2
•½ inch flat head screws x 50
•5/8 inch flat head screws x 6
•¾ inch flat head screws x 2
•1 inch flat head screws x 6
•Drawer box clips x 2
•Bumper pads x 6

SLIDE MOUNT
WALL BRACKET
DRAWER BOX CLIP 2

Cabinet Box Components List
•A – BACK PANEL
•B – SIDE PANELS (X2)
•C – BOTTOM PANEL
•D – TOE KICK PANEL
•E – FACE FRAME
•F – DRAWER BOX BACK
•G – DRAWER BOX SIDES (X2)
•H – DRAWER BOX BOTTOM
•I – ADJUSTABLE SHELF
•J – DRAWER HEAD
•K – CABINET DOOR

STEP 1
Join side panel with back panel using 2 metal cleats and (8) ½” flat head screws.
B.
A.
CLEAT

STEP 2
Join bottom panel with side panel by sliding
into grooves along side panel and back panel.
B. C.
A.

STEP 3
Join remaining side panel with bottom and back panel
using 2 metal cleats and (8) ½” flat head screws.
B.
B.
A.
C.
Cleat

STEP 4
Attach toe kick panel to both side panels using 2 metal cleats and (8) ½” flat head screws.
D.
B.
B.
C.

STEP 5
Place cabinet on its back. Attach face frame
to side panels using 4 metal cleats and (16) ½”
flat head screws.
E.
B.
D.
Cleats

STEP 6
Attach drawer box sides to the drawer box back connecting at the finger joints.
Slide the drawer box bottom into grooves along drawer sides.
Attach drawer head to drawer sides connecting at the finger joints.
F.
G.
G.
H.
J.
Finger Joints
Grooves

STEP 7
Flip drawer box over and attach drawer box clips to the
front corners of the box with (6) 1” flat head screws.
H.
Drawer box clips

STEP 8
Install (2) side mount glides by placing
(2) slide mount wall brackets in pre-drilled
hole locations on back panel. Then slide the
metal glides onto the brackets. Once
aligned with the front face frame, attach
front of glides with (8) ½” flat head screws.
Side mount drawer glide
Slide mount wall bracket
Pre-drilled holes
Front of glide screws

STEP 9
Flip drawer box right side up and slide
onto extended side mount drawer glides.
Push drawer box in till you hear a click.

K. Cabinet Door
STEP 10
Attach the door to the cabinet face frame.
First attach (2) soft close hinges to door with
(4) 5/8” flat head screws. Then attach hinges
To the face frame with (2) ¾” round head screws.
Hinges