Exclusive Heritage ED-10036S User manual

INSTALLATION GUIDE
FOR ED-10036S

INSTALLATION MANUAL
PACKING LIST (Not all components may be included, depending upon your purchase)
RECOMMENDED TOOLS
Main Cabinet
Pen & Ruler Caulk & Caulk Gun Power Drill Phillips Screwdriver Adjustable Wrench Goggles, Gloves & Ear Plugs
Optional: Mirror Optional: Square Sink
E N O CILI S
35.43”
36”
34.20”
31.50”
22”
14.96”
20”
FOR MODELS:
ED-10036S-WMES
ED-10036S-WMWH
ED-10036S-WMES-NM
ED-10036S-WMWH-NM
ED-10036S-CAB-ES
ED-10036S-CAB-WH
SAFETY & PRECAUTIONS
1. Exclusive Heritage
recommends you to review the
Installation Manual before
starting the vanity installation.
2. Please handle heavy objects
with care and support to avoid
mishaps damages or injuries.
3. After completing the
installation, please wait up to
24-hours before using the vanity.
4. When cleaning the top or
cabinet use mild strength for
scrubbing to avoid scratching the
surface.
5. Professional installation
recommended.
Sink Mounting Kit Mirror Installation Screws
Optional: Countertop

HOW TO CARRY THE TOP
OPTIONAL: SINK INSTALLATION
OPTIONAL: TOP & BACKSPLASH INSTALLATION
• Apply a continuous stream of silicone glue around the
sink top rim. Flip the countertop upside down.
• Carefully align the sink onto countertop back, fasten the
sink rim with the sink mounting screws.
• Apply a continuous silicone glue along the sink edges to
seal any gaps.
OPTIONAL: MIRROR INSTALLATION
123
2
3
11. Apply a continuous stream of silicone glue around the
top of the cabinet.
2. Carry the countertop and gently place it onto the cabinet.
3. Install the backsplash by applying silicone glue near the
edge of the countertop. Then place the backsplash onto the
silicone area. Add additional silicone onto the edges for
sealant if necessary.
Note: Allow up to 24-hours for the silicone glue to dry
before using the vanity.
CAUTION
Whether you are picking up a small or
large marble countertop, always have
extra support handling the heavy object.
We recommend two adults lifting and
manuevering the countertop around.
1. Measure the screw holes from the backside of the mirror (Fig. A)
distance. Then drill holes into the wall.
2. Insert the anchor screws into the holes and drill the screws into them.
3. Hang up the mirror into position and it is done.
Fig. A