Craftsman 28974 - Professional PGT 9000 28 HP/54" Garden... User manual

Operator's Manual
®
GARDE TRACTOR
28.0 HP,*54" Mower
Electric Start
Automatic Transmission
Model No.
917.28974
o EspaSol, p. 36
This product has alow emission engine which operates
differently from previously built engines. Before you start the
engine, read and understand this Owner's Manual.
IMPORTANT:
Read and follow all Safety
Rules and Instructions before
operating this equipment.
For answers to your questions
about this product, Call:
! =800-659-5917
Sears Craftsman Help Line
5 am - 5 pm, Mon - Sat
SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179 U.S,A.
Visit our Craftsman website:www.sears.com/craftsman *As raled by the engine manulacturer

Warranty ................................................ 2
Safety Rules .......................................... 3
Product Specifications ........................... 6
AssemblyiPre-Operation ....................... 8
Operation ............................................. 12
Maintenance Schedule ........................ 19
Maintenance ........................................ 19
Service and Adjustments ..................... 23
Storage ................................................ 30
Troubleshooting ................................... 31
Sears Service ........................ Back Cover
CRAFTSMAN PROFESSIONAL LIMITED WARRANTY
TWO YEARS ON TRACTOR
When operated and maintained according to all supplied instructions, if this tractor fails
due to a defect in material or workmanship within two years from the date or purchase,
call 1-800-4-MY-HOME® to arrange for free repair.
This warranty applies for only one year from the date of purchase if this tractor is ever
used for commercial or rental purposes.
During the first year of purchase, there will be no charge for warranty service in your home.
For your convenience, in-home warranty service will still be available after the first year
of purchase, but a trip charge will apply. This charge will be waived if you transpor[ the
tractor to an authorized Cfaftsman drop-off location. For the nearest authorized location,
call 1-800-4-MY-HOME®.
90 DAYS ON BATTERY
For ninety (90) days from date of purchase, if the battery included with this tractor is
defective in material or workmanship (our testing proves it wit! not hold a charge), it will be
replaced free of charge in your home.
This warranty covers ONLY defects in material and workmanship. Sears will NOT pay for:
• Expendable items that become worn during normal use, including but not limited to
blades, spark plugs, air cleaners, belts, and oil filters.
• Standard maintenance servicing, oil changes, or tune-ups.
• Tire replacement or repair caused by punctures from outside objects, such as nails,
thorns, stumps, or glass.
o Tire or wheel replacement or repair resulting from normal wear, accident, or improper
operation or maintenance.
, Repairs necessary because of operator abuse, including but not limited to damage
caused by towing objects beyond the capability of the tractor, impacting objects that
bend the frame or crankshaft, or over-speeding the engine.
o Repairs necessary because ofoperatornegligence, including but nottimitedto, electrical
and mechanical damage caused by improper storage, failure to use the proper grade
and amount of engine oil, failure to keep the deck clear of flammable debris, or failure to
maintain the equipment according to the instructions contained in the operator's manual.
• Engine (fuel system) cleaning or repairs caused by fuel determined to be contaminated or
oxidized (stale). tn general, fuel should be used within 30 days of its purchase date.
• Normal deterioration and wear of the exterior finishes, or product label replacement.
This warranty applies only while this product is within the United States.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
2

_DANGER: This cutting machine is capable of amputating hands and feet and
throwing objects. Failure to observe the following safety instructions could result
in serious injury or death.
_WARNING: in order to prevent ac-
cidental starting when setting up, trans-
porting, adjusting or making repairs,
always disconnect spark plug wire and
place wire where it cannot contact spark
plug.
_,WARNING: Do not coast down a hill in
neutral, you may lose control of the tractor.
_WARNING: Tow only the attachments
that are recommended by and comply with
specifications of the manufacturer of your
tractor. Use common sense when towing.
Operate only at the lowest possible speed
when on a slope. Too heavy of a load,
while on a slope, is dangerous. Tires can
lose traction with the ground and cause
you to lose control of your tractor.
_WARNING: Engine exhaust, some of
its constituents, and certain vehicle com-
ponents contain or emit chemicals known
to the State of California to cause cancer
and birth defects or other reproductive
harm.
_WARNING" Battery posts, terminals
and related accessories contain lead and
lead compounds, chemicals known to the
State of California to cause cancer and
birth defects or other reproductive harm.
Wash hands after handling,
I. GENERAL OPERATION
• Read, understand, and follow all instruc-
tions on the machine and in the manual
before starting.
• Do not put hands or feet near rotating
parts or under the machine. Keep clear
of the discharge opening at all times.
- Only allow responsible adults, who are
familiar with the instructions, to operate
the machine.
. Clear the area of objects such as rocks,
toys, wire, etc., which could be picked
up and thrown by the blades.
° Be sure the area is clear of bystand-
ers before operating. Stop machine if
anyone enters the area.
. Never carry passengers.
. Do not mow in reverse unless abso-
lutely necessary. Always look down and
behind before and while backing.
• Never direct discharged material toward
anyone. Avoid discharging material
against a wall or obstruction. Material
may ricochet back toward the operator.
Stop the blades when crossing gravel
surfaces.
. Do not operate machine without the
entire grass catcher, discharge guard, or
other safety devices in place and work-
ing.
• Slow down before turning.
• Never leave a running machine unat-
tended, Always turn off blades, set
parking brake, stop engine, and remove
keys before dismounting.
• Disengage blades when not mowing.
Shut off engine and wait for all parts to
come to a complete stop before clean-
ing the machine, removing the grass
catcher, or unclogging the discharge
guard.
, Operate machine only in daylight or
good artificial light.
, Do not operate the machine while under
the influence of alcohol or drugs.
, Watch for traffic when operating near or
crossing roadways.
° Use extra care when loading or unload-
ing the machine into a trailer or truck.
• Always wear eye protection when oper-
ating machine.
• Data indicates that operators, age 60
years and above, are involved in a large
percentage of riding mower-related in-
juries. These operators should evaluate
their ability to operate the riding mower
safely enough to protect themselves and
others from serious injury.
o Follow the manufacturer's recommen-
dation for wheel weights or counter-
weights.
• Keep machine free of grass, leaves or
other debris build-up which can touch
hot exhaust /engine parts and burn. Do
not allow the mower to plow leaves or
other debris which can cause build-up
to occur. Clean any oil or fuel spillage
before operating or storing the machine.
Allow machine to cool before
storage.
3

II. SLOPE OPERATION
Slopes are a major factor related to loss of
control and tip-over accidents, which can
result in severe injury or death. Opera-
tion on all slopes requires extra caution, if
you cannot back up the slope or if you feel
uneasy on it, do not mow it.
• Mow up and down slopes, not across.
, Watch for holes, ruts, bumps, rocks, or
other hidden objects. Uneven terrain
could overturn the machine. Tall grass
can hide obstacles.
, Choose a low ground speed so that you
wilt not have to stop or shift while on the
slope.
° Do not mow on wet grass. Tires may
lose traction.
Always keep the machine in gear when
going down slopes. Do not shift to neu-
tral and coast downhill.
. Avoid starting, stopping, or turning on a
slope. If the tires lose traction, disen-
gage the blades and proceed slowly
straight down the slope.
• Keep all movement on the slopes slow
and gradual. Do not make sudden
changes in speed or direction, which
could cause the machine to roll over.
• Use extra care while operating machine
with grass catchers or other attach-
ments; they can affect the stability of the
machine. Do no use on steep slopes.
o Do not try to stabilize the machine by
putting your foot on the ground.
, Do not mow near drop-offs, ditches,
or embankments. The machine could
suddenly roll over if awheel is over the
edge or if the edge caves in.
III. CHILDREN
Tragic accidents can occur if the operator
is not alert to the presence of children.
Children are often attracted to the machine
and the mowing activity. Never assume
that children will remain where you last
saw them.
•Keep children out of the mowing area
and in the watchful care of a responsible
adult other than the operator.
, Be alert and turn machine off if a child
enters the area.
•Before and while bacldng, look behind
and down for small children.
, Never carry children, even with the
blades shut off. They may fall off and
be seriously injured or interfere with
safe machine operation. Children who
have been given rides in the past may
suddenly appear in the mowing area for
another ride and be run over or backed
over by the machine.
, Never allow children to operate the
machine.
, Use extra care wtnen approaching blind
corners, shrubs, trees, or other objects
that may block your view of a child.
IV. TOWING
, Tow only with a machine that has a
hitch designed for towing. Do not attach
towed equipment except at the hitch
point.
,Follow the manufacturer's recommenda-
tion for weight limits for towed equip-
ment and towing on slopes.
,Never allow children or others in or on
towed equipment.
•On slopes, the weight of the towed
equipment may cause loss of traction
and loss of control.
• Travel slowly and allow extra distance to
stop.
V. SERVICE
SAFE HANDLING OF GASOLINE
To avoid personal injury or property
damage, use extreme care in handling
gasoline. Gasoline is extremely flammable
and the vapors are explosive.
-Extinguish all cigarettes, cigars, pipes,
and other sources of ignition.
° Use only approved gasoline container.
, Never remove gas cap or add fuel with
the engine running. Allow engine to cool
before refueling.
• Never fuel the machine indoors.
• Never store the machine or fuel con-
tainer where there is an open flame,
spark, or pilot light such as on a water
heater or other appliances.
, Never fill containers inside a vehicle or
on a truck or trailer bed with plastic liner.
Always place containers on the ground
away from your vehicle when filling.
4

, Remove gas-powered equipment from
the truck or trailer and refuel it on the
ground, if this is not possible, then
refuel such equipment with a portable
container, rather than from a gasoline
dispenser nozzle.
• Keep the nozzle in contact with the rim
of the fuel tank or container opening at
all times until fueling is complete. Do not
use a nozzle lock-open device.
o If fuel is spilled on clothing, change
clothing immediately.
• Never overfill fuel tank. Replace gas cap
and tighten securely.
GENERAL SERVICE
• Never operate machine in a closed area.
o Keep all nuts and bolts tight to be sure
the equipment is in safe working condi-
tion.
• Never tamper with safety devices.
Check their proper operation regularly.
• Keep machine free of grass, leaves, or
other debris build-up. Clean oil or fuel
spillage and remove any fuel-soaked
debris. Allow machine to cool before
storing.
° If you strike a foreign object, stop and
inspect the machine. Repair, if neces-
sary, before restarting.
• Never make any adjustments or repairs
with the engine running.
, Check grass catcher components and
the discharge guard frequently and re-
place with manufacturer's recommended
parts, when necessary.
, Mower blades are sharp. Wrap the
blade or wear gloves, and use extra cau-
tion when servicing them.
° Check brake operation frequently, Adjust
and service as required.
. Maintain or replace safety and instruc-
tion labels, as necessary.
° Be sure the area is clear of bystand-
ers before operating. Stop machine if
anyone enters the area.
o Never carry passengers.
o Do not mow in reverse unless abso-
lutely necessary. Always look down and
behind before and while backing.
, Never carry children, even with the
blades shut off. They may fall off and
be seriously injured or interfere with
safe machine operation. Children who
have been given rides in the past may
suddenly appear in the mowing area for
another ride and be run over or backed
over by the machine.
° Keep children out of the mowing area
and in the watchful care of a responsible
adult other than the operator.
°Be alert and turn machine off if a child
enters the area.
° Before and while backing, look behind
and down for small children.
• Mow up and down slopes (15 ° Max), not
across.
• Choose a low ground speed so that you
will not have to stop or shift while on the
slope.
• Avoid starting, stopping, or turning on a
slope. If the tires lose traction, disen-
gage the blades and proceed slowly
straight down the slope.
, if machine stops while going uphill,
disengage blades, shift into reverse and
back down slowly.
• Do not turn on slopes unless neces-
sary, and then, turn slowly and gradually
downhill, if possible.
5

PRODUCT SPECIFICATIONS
Gasoline Capacity 4 Gallons
and Type: Unleaded Regular
Oil Type SAE 30 (above 32°F)
(API-SG-SL): SAE 5W30 (below 32°F
Oil Capacity: Wi Filter: 64 oz.
W/O Filter: 60 oz.
Spark Plug: Champion: RC12YC
(Gap: .040")
Ground Speed Forward: 0-5.5
Reverse: 0-2.4
Charging System: I6 Amps @ 3600 RPM
Battery: AmpiHr: 28
Min. CCA: 230
Case size: U1R
Blade Bolt Torque: 45-55 Ft. Lbs.
CONGRATULATIONS on your purchase
of a new tractor. It has been designed,
engineered and manufactured to give
you the best possible dependability and
performance.
Should you experience any problem you
cannot easily remedy, please contact a
Sears or other qualified service center.
We have competent, well4rained repre-
sentatives and the proper tools to service
or repair this tractor,
Please read and retain this manual. The
instructions will enable you to assemble
and maintain your tractor properly. Always
observe the "SAFETY RULES".
CUSTOMER RESPONSIBILITIES
•Read and observe the safety rules.
, Follow a regular schedule in main-
taining, caring for and using your tractor.
, Follow the instructions under"Mainte-
nance" and "Storage" sections of this
owner's manual.
_WARNING: This tractor is equipped
with an internal combustion engine and
should not be used on or near any unim-
proved forest-covered, brush-covered or
grass-covered land unless the engine's
exhaust system is equipped with a spark
arrester meeting applicable local or state
laws (if any). If a spark arrester is used, it
should be maintained in effective working
order by the operator.
In the state of California the above is re-
quired by law (Section 4442 of the Califor-
nia Public Resources Code), Other states
may have similar laws. Federal laws apply
on federal lands. A spark arrester for the
muffler is available through your nearest
Sears service center (See REPAIR PARTS
manual).
REPAIR PROTECTION
AGREEMENTS
Congratulations on making a smart pur-
chase. Your new Craftsman® product is
designed and manufactured for years of
dependable operation. But like all products,
it may require repair from time to time. That's
when having a Repair Protection Agreernent
can save you money and aggravation.
Purchase a Repair Protection Agreement
now and protect yourself from unexpected
hassle and expense.
Here's what's included in the Agreement:
, Expert service by our 12,000 profesion-
al repair specialists.
• Unlimited service and no charge for
parts and labor on all covered repairs.
, Product replacement if your covered
product can't be fixed.
, Discount of 10% from regular price of
service and service-related parts not
covered by the agreement; also, 10% off
regular price of preventive maintenance
check.
• Fast help by phone - phone support
from a Sears representative on products
requiring in-home repair, plus conve-
nient repair scheduling.
Once you purchase the Agreement, a
simple phone call is all that it takes for you
to schedule service. You can call anytime
day or night, or schedule a service ap-
pointment online.
Sears has over 12,000 professional repair
specialists, who have access to over 4.5
million quality parts and accessories.
That's the kind of professionalism you can
count on to help prolong the life of your
new purchase for years to come. Purchase
your Repair Protection Agreement today[
Some limitations and exclusions apply.
For prices and additional information
call 1-800-827-6655,
SEARS iNSTALLATION SERVICE
For Sears professional installation of home
appliances, garage door openers, water
heaters, and other major home items, in
the U.S.A. call 1-800.4-MY-HOME®
6

(1) Locknut 3/8-16
(1) 1-1/40.D. Washer
Mower
(5) Large Retainer
Springs - 7/16
(!) 3/40.D. Washers
(5) I-3/16 O.D. Washers
(2) Small Retainer
Springs -5/!6
(1) Front Link (_.
(-1) Anti-Swat B-/ ar
k (2) Rear Lift Link
Assemblies
(1) Oil Drain Tube
For Future Use
(2) Keys
Mower Install Slope Sheet
Sheet
7

Your new tractor has been assembled at the factory with the exception of those parts left
unassembled for shipping purposes.
TOOLS REQUIRED FOR ASSEMBLY
A socket wrench set will make assembly
easier. Standard wrench sizes you need
are listed below.
(1) 3/4"wrench (1) Pliers
(1) 9/16" wrench (1) Utility knife
(I) Tire pressure gauge
When right or left hand is mentioned in
this manual, it means, from your point of
view, when you are in the operating posi-
tion (seated behind the steering wheel).
TO REMOVE TRACTOR FROM
CARTON
UNPACK CARTON
1. Remove all accessible loose parts and
parts cartons from carton.
2. Cut along dashed lines on all four pan-
els of carton. Remove end panels and
}ay side panels fiat.
3. Remove mower and packing materials.
4. Check for any additional loose aprts or
cartons and remove.
CHECK BATTERY
1. Lift hood to raised position.
NOTE: If this battery is put into service
after month and year indicated on label
(L) (label is located between terminals)
charge battery for minimum of one hour at
6-10 amps. (See "BATTERY" in Mainte-
nance section of this manual for charging
instructions).
ADJUST SEAT
1. Sit in seat.
2. Lift up adjustment lever (A) and slide
seat until a comfortable position is
reached which allows you to press
brake pedal all the way down.
3. Release lever to lock seat in position.
NOTE: You may now roll your tractor off
the skid. Follow the appropriate instruction
below to remove the tractor from the skid.
WARNING: Before starting, read, un-
derstand and foIIow all instructions in the
Operation section of this manual. Be sure
tractor is in a well-ventilated area. Be sure
the area in front of tractor is clear of other
people and objects.
TO ROLL TRACTOR OFF SKID
(See Operation section for location
and function of controls)
1. Raise attachment lift lever to its highest
position,
2. Release parking brake by depressing
brake pedal.
3. Place freewheel control in "trans-
mission disengaged position" (See "TO
TRANSPORT" in the Operation section
of this manual).
4. Roll tractor forward off skid.
ASSEMBLE FRONT WHEEL TO
MOWER
I. Using shoulder bolt, washer and
Iocknut from parts bag, assemble front
wheel to mower as shown. Tighten
securely.
lnmediatamen
almacenamier
tractor no se v
_ADVERTEr
tor con gasolir
edificio en don
una llama expl
et motor seen
cualquier recir
TRACTOR
Cuando el trac
periodo de tier
quite toda la rr
Gu&rdela en u
1, Limpietod
secci6n de
2. Inspeccio_
necesafio
cambio de
Servicio y.
3. Lubriquelo
de Manten
4. Aseg_rese
pernos y k
en forma s
movibles 1:
desgaste.
5. Retoque tc
das o pica,
BATERiA
• Cargue lab
guardada.
• Despu_s de
almacenam
volver a car
• Para ayuda_
de potencia
almacenam
los cables d
cuidadosarr
BATERiA Y
cihn de Mar
• Despu6s d_
nectados y
entrar en cc
bateria.
• Si se remuE
almacenam
sobre concr
MOTOR
SISTEMA DE
IMPORTANTE
forman deposi
mentales de] ._
como el carbu
la manguera e
alcohol (cono/
etanol o metal
que conduce
de acudos du[
8

iCONTROLDE
:)preajustado en
ajustes. Revise
_tinuaci6n,antes
neoesario, yea
)NTROL DE
sido preajustado
itar ajustes.
kDOR
do en la fa'brica
_in embargo, se
nor importancia
_sen el combus-
Si el carburador
de motor,
INSTALL MOWER AND DRIVE
BELT
See MOWER AND DRIVE BELT AS-
SEMBEY Supplement Sheet for additional
guidance on this assembly.
Be sure tractor is on level surface and
engage parking brake.
1. Lower attachment lift lever to it's lowest
position.
CAUTION: Lift lever is spring loaded.
Have a tight grip on lift lever, lower it
slowly and engage in lowest position.
2, Turn steering wheel to the left as far as it
will go and position mower on right side
of tractor with deflector shield to the right. - Pivot bar towards you and insert other end of bar into hole in rear mower
bracket (D). Move mower as needed to
insert bar.
- Secure with washer and retainer
spring as shown.
3. Remove plastic tie securing belt, bring
belt forward and check belt for proper
routing in all mower pulley grooves.
!6. ATTACH MOWER SIDE SUSPENSION
ARMS (A) TO CHASSIS- Position hole
in arm over pin (B) on outside of tractor
chassis and secure with washer and
retainer spring.
7. Repeat on opposite side of tractor.
NOTE: Be sure mower side suspension
arms (A) are pointing forward before slid-
ing mower under tractor.
4. Slide mower under tractor until it is
centered under tractor.
5. FIRST INSTALL ANTI-SWAY BAR (S).
- From right side of mower, insert
ant-sway bar into hole in transmission
bracket (T).
9

8. AI-FACH REAR LIFT LINKS (C) - Insert
rod end of link assembly into hole in trac-
tor lift shaft suspension arm (L) and pivot
link down to mower. Lift rear corner of
mower and position slot in link assembly
over pin on rear mower bracket (D) and
secure with washer and retainer spring.
9. Repeat on opposite side of tractor.
10. Turn steering wheel to position wheels
straight forward.
11. ATTACH FRONT LINK (E) - Work from
left side of tractor, insert rod end of link
assembly through front hole in tractor
front suspension bracket (F) and secure
with retainer spring (G) through hole in
link located behind the bracket.
I2. Insert other end of link (E) into hole in
front mower bracket (H) and secure with
washer and retainer spring (J).
13. Disengage belt tension rod (K) from lock-
ing bracket (L).
I4. Install belt onto engine clutch pulley (M),
IMPORTANT: Check belt for proper routing
in all mower pulley grooves,
! 5, Engage belt tension rod (K) on locking
bracket (L),
CAUTION: Belt tension rod is spring
loaded, Have a tight grip on rod and engage
slowly.
16. Raise attachment lift lever to highest
position.
17. If necessary, adjust gauge wheels
before operating mower as shown in the
Operation section of this manual.
®
PARA REMO_
HACER REp/3
1. Bloquee el
2. Remueva
retenci6n
remoci6n €
contiene u
3. Repare la
AVISO: En fa_
alinee tas ram
trasera en el e
Anill_ €
Retenc
Cubieda
del eje_,
Llave Cuadrad_
trasera solarne_
4, Vuetva a c
anillo de rc
ranura del
5. Vuelva a co
AVISO: Pare
y p_ra preveni
cause de peqt
merciante Se_
Elsello previer
tambi6n la cot
PARA HACEF
UNA BATERi,
_ADVERTEI
mo generan g
chispas, tas II_
alejados de la
tecci6n para fc
Si su bateria
hacer arranca
cargar. (Vea "f
imiento de est
Si se usan "c
ranque de era,
IMPORTANTE
un sistema de
tiene que ten_
la bater[a de
otros vehiculo
PARA ADJUN
EMPALME -
1. Conecte c
el terminal
bateria, pr
circuito en
2. Conecte u
con el terr
bater[a co
3. Conecte e
GRO con
DEL CHAI
combustib
I0

IONA BIEN
.'o(5) pies
cidad y al
ie nivelada, de
siso hacerle el
na bien et
LciOn:
Jperficie nivela-
da, pise a rondo
freno de mano.
ndo etcontrol de
ransrnisi6n des-
t, ins6rtelo en la
iue perrnanezca
_ndesactivada.
tcarse y frenar
r el tractor ha-
Jedas de atr#,s
._rvicioal freno.
tro de servicios
os autorizado.
i LAS RUE-
ruedas det-
_n asi de f&bri-
y la inclinaciOn
regulables. En
o que afecte
is ruedas del-
'ica, p6ngase
_ticios Sears u
:1o.
CHECK TIRE PRESSURE
The tires on your tractor were overinflated
at the factory for shipping purposes. Cor-
rect tire pressure is important for best
cutting performance.
o Reduce tire pressure to PSI shown on
tires.
CHECK DECK LEVELNESS
For best cutting results, mower hous-
ing should be properly leveled. See "TO
LEVEL MOWER" in the Service and
Adjustments section of this manual.
CHECK FOR PROPER POSITION
OF ALL BELTS
See the figures that are shown for replac-
ing motion and mower blade drive belts
in the Service and Adjustments section
of this manual. Verify that the belts are
routed correctly.
CHECK BRAKE SYSTEM
After you learn how to operate your trac-
tor, check to see that the brake is operat-
ing properly. See "TO CHECK BRAKE"
in the Service and Adjustments section of
this manual.
v'CHECKLIST
Before you operate your new tractor, we
wish to assure that you receive the best
performance and satisfaction from this
Quality Product.
Please review the following chectdist:
J All assembly instructions have been
completed.
v' No remaining loose parts in carton.
v" Battery is properly prepared and
charged.
v" Seat is adjusted comfortably and tight-
ened securely.
,/All tires are properly inflated. (For ship-
ping purposes, the tires were overin-
flated at the factory).
,/Be sure mower deck is properly leveled
side-to-side/front-to-rear for best cutting
results. (Tires must be properly inflated
for leveling),
,/Check mower and drive belts. Be sure
they are routed properly around pulleys
and inside all belt keepers.
z" Check wiring. See that all connections
are still secure and wires are properly
clamped,
v" Before driving tractor, be sure freewheel
control is in "transmission engaged"
position (see "TO TRANSPORT" in the
Operation section of this manual).
While learning how to use your tractor,
pay extra attention to the following impor-
tant items:
v' Engine oil is at proper level.
v" Fuel tank is filled with fresh, clean,
regular unleaded gasoline.
,t" Become familiar with all controls, their
location and function. Operate them
before you start the engine.
#" Be sure brake system is in safe operat-
ing condition.
v' Be sure Operator Presence System
and Reverse Operation System (ROS)
are working properly (See the Opera-
tion and Maintenance sections in this
manual).
v' It is important to purge the transmission
before operating your tractor for the first
time. Follow proper starting and transmis-
sion purging instructions (See 'qO START
ENGINE and PURGE TRANSMISSION
in the Operation section of this manual).
11

These symbols may appear on your tractor or in literature supplied with the product.
Learn and understand their meaning.
R H L U ,R@
REVERSE HIGH LOW CHOKE FAST SLOW IGNITION SWITCH
N
NEUTRAL
ENGINE OFF REVERSE ENGINE ON ENGINE START PARKING BRAKE MOWER HEIGHT
OPERATION
SYSTEM(ROS)
@
MOWER LIFT
LIGHTS ON FUEL BATTERY REVERSE FORWARD CRUISE CONTROL CLUTCHtBRAKE
PEDAL
DANGER, KEEP HANDS
AND FEET AWAY
A3-rACHMENT ATTACHMENT
CLUTCH DISENGAGED CLUTCH ENGAGED ®@®@@
KEEP AREA CLEAR SLOPE HAZARDS
(SEE SAFETY RULES SECT|ON)
FREE WHEEL
(Automatc Models only)
&DANGER indicates a hazard which, if not avoided,
will result in death or serious injury.
WARNING indicates a hazard which, if not avoided,
could result in death or serious injury.
CAUTION indicates a hazard which, if not avoided,
might result in minor or moderate injury.
Failure to follow instructions
could result in serious injury or
death. The safety alert symbol
is used to identify safety inform-
ation about hazards which can
result in death, serious injury'
and/or property damage.
CAUTION when used without the alert symbol,
indicates a situation that could result in damage
to the tractor and/or engine.
HOT SURFACES indicates a hazard which,
if not avoided, could result tn death, serious injury
and/or property damage.
FIRE indicates a hazard which, if not avoided,
could result in death, serious injury and/or
property damage.
Ajusle la lucre,
regulaciSn de
B pare levanla
la segado_a
NOTA: Cada
ajuste her& va
• Vuelva ave
nuevamentt
punta enter
1/8" a 1/2" r
• Mantenga
por medio c
1atuerca co
12

_alizarun ajuste,
]strucciones de
cen mAs arriba.
_sy ajuste
ario, hasta que
L
S
Eedarbien
:rfectamente
dora deben
,unta anterior
,_la punta
encuentre en
afiladas, Prot6-
'uelva las cuchil-
ambas cosas.
ici6n m&s atta.
Lsde la cuchilla
tede apuntando
Mida la distan-
anterior y el
)r y el suelo.
KNOW YOUR TRACTOR
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
TRACTOR
Compare the illustrations with your tractor to familiarize yourself with the locations of
various controls and adjustments. Save this manual for future reference.
Je la cuchilla no
la punta poste-
ante del tractor.
8" o de calibre
_ndole varias
de ajuste B.
o de calibre
de ajuste de la
sentido horario
le adelante de
antihorario
Our tractors conform to the applicable safety standards of the
American National Standards Institute.
(A) ATTACHMENT LIFT LEVER - Used
to raise and lower the mower or other at-
tachments mounted to your tractor,
(B) BRAKE PEDAL- Used for braking
the tractor and starting the engine.
(C) PARKING BRAKE - Locks clutch/
brake pedal into the brake position.
(D) THROTTLE/CHOKE CONTROL-
Used for starting and controlling engine
speed,
(E) ATTACHMENT CLUTCH SWITCH
- Used to engage the mower blades, or
other attachments mounted to your tractor.
(F) IGNITION SWITCH - Used for starting
and stopping the engine.
(G) REVERSE OPERATION SYSTEM
(ROS) "ON" POSITION - Allows opera-
tion of mower or other powered attach-
ment while in reverse.
(H) LIGHT SWITCH -Turns the head-
lights on and off.
(J) CRUISE CONTROL LEVER -Used to
set forward movement of tractor at desired
speed without holding the forward drive
pedal.
(K) FORWARD DRIVE PEDAL- Used for
forward movement of tractor.
(L) REVERSE DRIVE PEDAL- Used for
reverse movement of tractor.
(M) FREEWHEEL CONTROL - Disen-
gages transmission for pushing or slowly
towing the tractor with the engine off.
(P) SERVICE REMINDER/HOUR METER
- Indicates when service is required for the
engine and mower.
(2:) AMMETER- Indicates charging (+) or
discharging (-) of battery.
13

The operation of any tractor can result in foreign objects thrown into the
eyes, which can result in severe eye damage. Always wear safety glasses
or eye shields while operating your tractor or performing any adjustments
or repairs. We recommend standard safety glasses or a wide vision safety
mask worn over spectacles.
HOW TO USE YOUR TRACTOR
TO SET PARKING BRAKE
Your tractor is equipped with an operator
presence sensing switch. When engine
is running, any attempt by the operator
to leave the seat without first setting the
parking brake wilt shut off the engine.
1. Depress brake pedal (B) all the way
down and hold.
2. Pull parking brake lever (C) up and
hold, release pressure from brake
pedal (B), then release parking brake
lever. Pedal should remain in brake
position. Make sure parking brake will
hold tractor secure.
NOTE: Failure to move throttle control be-
tween half and full speed (fast) position, be-
fore stopping, may cause engine to "backfire".
, Turn ignition key (F) to "STOP" position
and remove key. Always remove key
when leaving tractor to prevent unau-
thorized use.
IMPORTANT: Leaving the ignition switch in
any position other than "STOP" will cause
the battery to discharge and go dead.
NOTE; Under certain conditions when
tractor is standing idle with the engine
running, hot engine exhaust gases may
cause "browning" of grass. To eliminate
this possibility, always stop engine when
stopping tractor on grass areas.
&CAUTION: Always stop tractor com-
pletely, as described above, before leaving
the operator's position.
STOPPING
MOWER BLADES -
o To stop mower blades, move attachment
clutch clutch lever to disengaged position
(m).
(1"_-t) Attachment
Clutch ( I-_ ) Disengaged
Engage Position Position
GROUND DRIVE -
• To stop ground drive, depress brake
pedal all the way down.
ENGINE -
o Move throttle control (D) between half
and full speed (fast) position.
TO USE THROTTLE CONTROL (D)
Always operate engine at full speed (fast).
o Operating engine at less than full speed
(fast) reduces engine's operating efficiency,
• Full speed (fast) offers the best mower
performance.
TO MOVE FORWARD AND
BAC KWAR D
The direction and speed of movement is
controlled by the forward and reverse drive
pedals.
1. Start tractor and release parking brake.
2. Slowly depress forward (K) or reverse
(L) drive pedal to begin movement.
Ground speed increases the further
the is de
14
ADVEF
SERVI(
1, Pre
2. Pot
3. Pot
4. AsE
tam
5. De_
PARA, DES[_
DE CESPEE
1. Suelte ele
posici6n "[
DO").
2. Baje la pal
posici6n d,
3. Retire tab
de fa barrr=
&CUIDADC
rea funciona a
su61tela desp_
4. Retire ]a c,
del embra!
5. Desconect
de la corta
ci6n y la a_
6. Por uno d_
desconect
ta cortador
uni6n post
de la corta
contenciSr

teltractor(en-
_ici6nOFRGire
ci6nSTOPpare
ierrelallavedel
radecierredel
tdesconectarel
odelacubierta,
.=ca,preferente-
tada. Conecte la
de la segadora
y ayudar a que
i tractor.
accesorio de
est,, Ud. y
_n expuestos
aquellos oh-
;en contacto.
eel accesorio
rotes de volver
le la segadora
seguridad.
TO USE CRUISE CONTROL
The cruise control feature can be used for
forward travel only.
SYSTEM CHARACTERISTICS
The cruise control should only be used
while mowing or transporting on relatively
smooth, straight surfaces. Other conditions
such as trimming at slow speeds may
cause the cruise control to disengage. Do
not use the cruise control on slopes, rough
tertian or while trimmimg or turning.
, With forward drive pedal depressed to
desired speed, pull cruise control lever
(J) up and hold while lifting your foot off
the pedal, then release the lever.
To disengage the cruise control, depress the
brake pedal or tap on forward drive pedal.
TO ADJUST MOWER CUTTING HEIGHT
The position of the attachment lift lever (A)
determines the cutting height.
• Put attachment lift lever in desired cutting
height slot.
o Slide pointer tab (T) to desired cutting
height as a reminder for next time you
mow.
The cutting height range is approximately
1" to 4". The heights are measured from
the ground to the blade tip with the engine
not running. These heights are approximate
and may vary depending upon soil condi-
tions, height of grass and types of grass
being mowed.
• The average lawn should be cut to ap-
proximately 2-1/2" during the cool season
and to over 3" during hot months. For
healthier and better looking lawns, mow
often and after moderate growth.
• For best cutting performance, grass over
6" in height should be mowed twice. Make
the first cut relatively high; the second to
desired height.
TO ADJUST GAUGE WHEELS
Gauge wheels are properly adjusted
when they are slightly off the ground when
mower is at the desired cutting height in
operating position. Gauge wheels then
keep the deck in proper position to help
prevent scalping in most terrain conditions.
NOTE: Adjust gauge wheels with tractor
on a flat level surface.
1. Adjust mower to desired cutting height
(See "TO ADJUST MOWER CUTTING
HEIGHT" in this section of manual).
2. With mower in desired height of cut
position, gauge wheels should be
assembled so they are slightly off the
ground. Install gauge wheel in appro-
priate hole. Tighten securely.
3. Repeat for all, installing gauge wheel in
same adjustment hole.
TO OPERATE MOWER
Your tractor is equipped with an operator
presence sensing switch. Any attempt
by the operator to leave the seat with the
engine running and the attachment clutch
engaged will shut off the engine. You must
remain fully and centrally positioned in the
seatto preventthe engine from hesitating or
cutting off when operating your equipment
on rough, rolling terrain or hills.
I. Select desired height of cut with at-
tachment lift lever.
2. Start mower blades by engaging at-
tachment clutch control.
TO STOP MOWER BLADES -
disengage attachment clutch control.
_}_CAUTION: Do not operate the mower
without either the entire grass catcher, on
mowers so equipped, or the deflector shield
(S) in place.
15

REVERSE OPERATION SYSTEM (ROS)
Your tractor is equipped with a Reverse
Operation System (ROS). Any attempt by
the operator to travel in the reverse direction
with the attachment clutch engaged will shut
off the engine unless ignition key is placed
in the ROS "ON" position.
_WARNING: Backing up with the at-
tachment clutch engaged while mowing is
strongly discouraged. Turning the ROS "ON",
to allow reverse operation with the attach-
ment clutch engaged, should only be done
when the operator decides it is necessary to
reposition the machine with the attachment
engaged. Do not mow in reverse unless
absolutely necessary.
USING THE REVERSE OPERATION
SYSTEM -
Only use if you are certain no children or
other bystanders will enter the mowing area.
1. Depress brake pedal all the way down.
2. With engine running, turn ignition key
counterclockwise to ROS "ON" position.
3. Look down and behind before and
while backing.
4. Slowly depress reverse drive pedal to
start movement.
5. When use of the ROS is no longer
needed, turn the ignition key clockwise
to engine "ON" position.
ROS "ON" Position Engine "ON" Position
(Normal Operating)
TO OPERATE ON HILLS
_WARNING: Do not drive up or down
hills with slopes greater than 15 ° and do
not drive across any slope. Use the slope
guide provided at the back of this manual.
• Choose the slowest speed before start-
ing up or down hills.
, Avoid stopping orchanging speed on hills.
, If stopping is absolutely necessary, push
brake pedal quickly to brake position
and engage parking brake.
• To restart movement, slowly release
parking brake and brake pedal.
• Slowly depress appropriate drive pedal
to slowest setting.
° Make all turns slowly.
TO TRANSPORT
When pushing or towing your tractor, be
sure to disengage transmission by placing
freewheel control in freewheeling position.
Freewheel control is located at the rear
drawbar of tractor.
1. Raise attachment lift lever to its highest
position.
2. Pull freewheel control out and into the
slot and release so it is held in the
disengaged position.
, Do not push or tow tractor at more than
two (2) MPH.
• To re-engage transmission, reverse
above procedure.
Transmisst{_n Engaged
Transmission Disengaged
16
NOTE: To protect hood from damage when
transporting your tractor on a truck or a
trailer, be sure hood is closed and secured
to tractor. Use an appropriate means of
tying hood to tractor (rope, cord, etc.).
TOWING CARTS AND OTHER
ATTACHMENTS
Tow only the attachments that are recom-
mended by and comply with specifications
of the manufacturer of your tractor. Use
common sense when towing. Too heavy
of a load, while on a slope, is dangerous.
Tires can lose traction with the ground and
cause you to lose control of your tractor.
BEFORE STARTING THE ENGINE
CHECK ENGINE OIL LEVEL
The engine in your tractor has been
shipped, from the factory, already filled
with summer weight oil.
1. Check engine oil with tractor on level
ground.
2. Remove oil fill cap!dipstick and wipe
clean, reinsert the dipstick and screw
cap tight, wait for a few seconds, re-
move and read oil level. If necessary,
add oil until "FULE' mark on dipstick is
reached. Do not overfill.
• For cold weather operation you should
change oil for easier starting (See the
oil viscosity chart in the Maintenance
section of this manual).
, To change engine oil, see the Mainte-
nance section in this manual.
FILTRO DEL
Su motor pue(
manera incorn
D_le servicio
si se usa 8n cc
manual de la r
FILTRO DE A
Cambie el filth
rada ovez pot
tractor se usa
LIMPIEZA DE
La rejilla de ai
y paja para ev
sobrecalentarT
alambre o con
mugre y las fit
LIMPIEZA DE
DE ENFRIAM
Para asegurar
aseg_rese quq
de enfriamient
motor se man:
Cada 100 hor_
bajo condicior
o sucias), rein
tapas de enfri_
friamiento y la
necesario, Ast
las tapas de e
AVtSO: Si se
del c_sped bk
de enfriamienl
enfriamiento r
motor debido

terantesdear-
eocho(8)horas
_padelretleno!
_ceiteenforma
_iveldelaceite.
!LMOTOR
"aturaesperada
elaceitedebe
,icioAPISG-SL.
enunasuperfi-
mentecuando
:adecuado.
:adore de nivel
cuidado de
"een el motor
,Ia parte
gQe e instale el
arnici6n.
_ceite
_-_Tubo de
desagSe
Impujando
la izquierda.
la v&lvula de
ya drenado
la v&lvula de
.=ntroy dando
as de un retoj
posici6n
:3.
._y substituya
5n inferior de la
aceite a trav6s
,ra de nivel
,lo lentamente.
la capacidad
caciones del
anual.
trilla indicadora
ire para revisar
a. inserte
_n el tubo y
_ente en su
nga el aceite
marca de
:adorede nivel.
firmemente en
ADD GASOLINE
" Fill fuel tank to bottom of filler neck. Do not
overlie Use fresh, clean, regular unleaded
gasoline with a minimum of 87 octane.
(Use of leaded gasoline will increase
carbon and lead oxide deposits and reduce
valve life). Do not mix oil with gasoline.
Purchase fuel in quantities that can be used
within 30 days to assure fuel freshness.
_CAUTION: Wipe off any spilled oil or
fuel. Do not store, spill or use gasoline
near an open flame.
IMPORTANT: When operating in tempera-
tures below 32°F(0°C), use fresh, clean
winter grade gasoline to help insure good
cold weather starting.
CAUTION: Alcohol blended fuels (called
gasohol or using ethanol or methanol) can
attract moisture which leads to separation
and formation of acids during storage. Acidic
gas can damage the fuel system of an engine
while in storage. To avoid engine problems,
the fuel system should be emptied before
storage of 30 days or longer. Drain the gas
tank, start the engine and let it run until the
fuel lines and carburetor are empty. Usefresh
fuel next season. See Storage Instructions
for additional information. Never use engine
e r carburetor cleaner products in the fuel tan k
or permanent damage may occur,
RESERVE FUEL VALVE OPERATION
1. Raise seat to access reserve fuel
valve.
2. In normal operation, valve should be
set to primary (as shown in view)
3, If tractor runs out of fuel, rotate valve
handle to reserve.
4, Drive tractor to be refueled.
5, After refueling, return valve to primary
position.
Reserve
Fuel Valve @
Primary
TO START ENGINE
When starting the engine for the first time
or if the engine has run out of fuel, it will
take extra cranking time to move fuel from
the tank to the engine.
1. Be sure freewheel control is in the
transmission engaged position.
2. Sit on seat in operating position, depress
brake pedal and set parking brake.
3. Move attachment clutch to disengaged
position.
4. Move throttle control to fast position
5. Pullchoke control outforacold engine start
attempt. For a warm engine start attempt
the choke control may not be needed.
NOTE: Before starting, read the warm and
cold starting procedures below.
6. insert key into ignition and turn key
clockwise to start position and release
key as soon as engine starts. Do not run
starter continuously for more than fifteen
seconds per minute. If the engine does
not start after several attempts, push
choke control in, wait a few minutes and
try again. If engine still does not start, pull
the choke control out and retry.
WARM WEATHER STARTING (50 ° F and
above)
7. When engine starts, slowly push choke
control in until the engine begins to
run smoothly, If the engine starts to
run roughly, pull the choke control out
slightly for a few seconds and then
continue to push the control in slowly.
. The attachments and ground drive can
now be used. if the engine does not
accept the load, restart the engine and
allow it to warm up for one minute using
the choke as described above.
COLD WEATHER STARTING (50 ° F and
below)
8. When engine starts, slowly push choke
control in until the engine begins to run
smoothly. Continue to push the choke
control in small steps allowing the engine
to accept small changes in speed and
toad, until the choke control is fully in. If the
engine starts to run roughly, pull the choke
control out slightly for a few seconds and
then continue to push the control in slowly.
This may require an engine warm-up
period from several seconds to several
minutes, depending on the temperature.
AUTOMATIC TRANSMISSION WARM UP
Before driving the unit in cold weather, the
transmission should be warmed up as follows:
1. Be sure the tractor is on level ground.
2. Release the parking brake and let the
brake slowly return to operating position.
3. Allow one minute for transmission to
warm Lip. This can be done during the
engine warm up period.
17

o The attachments can be used during the
engine warm-up period after the transmis-
sion has been warmed up and may require
the choke control be pulled out slightly.
NOTE: If at a high altitude (above 3000
feet) or in cold temperatures (below 32 ° F)
the carburetor fuel mixture may need to be
adjusted for best engine performance (see
"TO ADJUST CARBURETOR" in the Service
and Adjustments section of this manual).
SERVICE REMINDER/HOUR METER
Service reminder shows the total number
of hours the engine has run and flashes to
indicate that the engine or mower needs
servicing. When service is required, the
service reminder will flash for two hours.
To service engine and mower, see the
Maintenance section of this manual.
NOTE: Service reminder runs when the igni-
tion key is in any position but "STOP". For
accurate reading, be sure key remains in the
"STOP" position when engine is not running.
RGE TRANSMISSION
CAUTION: Never engage or disengage
freewheel lever while the engine is running.
To ensure proper operation and per-
formance, it is recommended that the
transmission be purged before operating
tractor for the first time. This procedure will
remove any trapped air inside the trans-
mission which may have developed during
shipping of your tractor.
IMPORTANT: Should your transmission
require removal for service or replace-
ment, it should be purged after reinstall-
at!on before operating the tractor,
1. Place tractor safely on a level surface -
that is clear of objects and open - with
engine off and parking brake set.
2. Disengage transmission by placing
freewheel control in disengaged posi-
tion (See "TO TRANSPORT" in this
section of manual).
3. Sitting in the tractor seat, start engine.
After the engine is running, move
throttle control to slow position. Disen-
_gage parking brake.
CAUTION: At any time, there may be
movement of the drive wheels.
4, Depress forward drive pedalto fullforward
position and hold for five (5) seconds and
release pedal. Depress reverse drive
pedal to full reverse position and hold
for five (5) seconds and release pedal.
Repeat this procedure three (3) times.
18
5. Shutoff engine and set parking brake.
6+ Engagetransmissionbyplacingfreewheel
control in engaged position (See "TO
TRANSPORT" in this section of manual).
7. Sitting in the tractor seat, start engine.
After the engine is running, move
throttle control to half (1t2) speed.
Disengage parking brake.
8. Drive tractor forward for approximately
five feet then backwards for five feet.
Repeat this driving procedure three times.
Your transmission is now purged and now
ready for normal operation.
MOWING TIPS
. Tire chains cannot be used when the
mower housing is attached to tractor.
o Mower should be properly leveled for best
mowing performance. See "TO LEVEL
MOWER HOUSING" in the Service and
Adjustments section of this manual.
. The left hand side of mower should be
used for trimming.
o Drive so that clippings are discharged
onto the area that has already been cut.
Have the cut area to the right of the tractor.
This will result in a more even distribution
of clippings and more uniform cutting.
• When mowing large areas, start by
turning to the right so that clippings will
discharge away from shrubs, fences,
driveways, etc. After one or two rounds,
mow in the opposite direction making
left hand turns until finished.
. Ifgrass isextremelytall, itshould be mowed
_,vice to reduce load and possible fire haz-
ard from dried clippings. Makefirst cut rela-
tively high; the secondto the desired height.
° Do not mow grass when it is wet. Wet grass
will plug mower and leave undesirable
clumps. Allow grass to dry before mowing.
o Always operate engine at full throttle
when mowing to assure better mow-
ing performance and proper discharge
of material. Regulate ground speed by
selecting a low enough speed to give the
mower cutting performance as well as the
quality of cut desired.
o When operating attachments, select a
ground speed that will suit the terrain and
give best performance of the attachment
being used.
TRACTOR
Siempre obs_
ando d_ mant
OPERACION
Si el tractor n,
para detener_
cambio m&s
de hormig6n €
el servicio alf
FUNCIONA E
Servicio y aju
LLANTAS
.Mantenga t
presi6n de
indica en e
• Mantenga I
substancia_
tos que pu_
• Evite los to
fundas, los
que puedet
AVlSO: Para
y p6ra preven
causa de peq
setlo para liar
de repuesto n
las llantas se
SISTEMA PR
MA FUNCIOF
Asegurarse d
del operador '
funcionen bie
descrito, repa
•El motornc
embrague/
presionado
accesorio
VERtFt ZSL,
•Cuando el
tentativa d_
asiento sin
namiento p
• Cuando el
embrague,
cualquier t_
abandoner
, El embragL
funcionar n
asiento,
VERIFII_Z SI_
ATR/_S (ROS
• Cuando el
terruptor d_
y el embra(
quier rental
err&s, apag
Posici6n RO_

t',U,'I,.\C Et,_At4tSt.,rio
v'
CI6N
Q Accesorio
de Grasa
delArbol
"'O Accesorio
de Grasa del
Rodamiento
,k_.,,de la Rueda
Delantera
(_ Motor
'd%°CG? 31'°
def mandril
:)TO R" en
ase los puntos
los de nll6n
sos atraer#,n
.duraci6n de
•icarse, use
ito de polvo
..................MAINTENANCE BEFORE EVERY EVERY
SCHEDULE EACH 8 25
USE HOURS HOURS
Check Brake OPeration _
Check Tire Pressure _ 6/ ......
To,,oo,,o,,+,,,,,,+.,,+.,o.o,,Ro++'+i+' I
R
A Check for Loose Fasteners _ .......................
C ChecI'JRep tace Mower Blades _'a
TLubrication Chart
0 Check Battery Level ........ ,,,,,,,,_
RClean Batter/and Terminals
Chec k Transaxle Cooling ............................. &/
Check Mower Levelness
Check V-Belts
Check Enqine Oil Level _ ........ V _' ,
EVERY EV'ERY EVERY BEFORE
50 100 SEASON STORAGE
HOURS HOURS
v" v"
v'
v" e,'
C]!an99 E.,npineOIt (wfti_ oil filler) " '
C!lange Eng!ne at! (without oil llltel _/'!,_ ............................................................ _ .....
Clean Air Filler _/'p, ..............
v"
...........................................v' o," '
6/2 v'
GClean Air Screen
i!nsPecl MuffleriSp,ark Arresler
N Replace Oil Fitter (l! equipped)
E Clean Engine Cooling Fins
Replace S,Pa_'k P,!u9
Reptac,e Air F!!ler pa,per ,Cartridge .................
Replace Fuet Filler
3- Replace blades more allenwhen mowing Insandy soil,
4 - Not required tl equipped wilh mainlenance4ree battery,
I - Change more often when operating under a heavy load or
Inhigh ambient temperatures.
2 - Service more often when operaling in dtrly or dusty condilions,
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator
must maintain tractor as instructed in this
manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
, At least once a year you should replace
the spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation,
3. Check tire pressure.
4. Check operator presence and
RQS systems for proper operation,
5. Check for loose fasteners.
LUBRICATION CHART
O Spindle Spindle
Zerk Zerk
(_) Front
Bearing zerk Engine
O Steering /
Sector Gear Mandrel
Teeth Zerks
Front Wheel
Bearing zed<
d.)General Purpose Grease
(_Refer to Maintenance "ENGINE" Section
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that wilt shorten the life of the
self-lubricating bearings. If you feel they
must be lubricated, use only a dry, pow-
dered graphite type lubricant sparingly,
19

TRACTOR
Always observe safety rules when performing
any maintenance.
BRAKE OPERATION
If tractor requires more than five (5) feet to
stop at highest speed in highest gear on a
level, dry concrete or paved surface, then
brake must be serviced. (See "TO CHECK
BRAKE" in the Service and Adjustments
section of this manual).
TIRES
, Maintain proper air pressure in all tires
(See PSI on tires).
= Keep tires free of gasoline, oil, or insect
control chemicals which can harm rubber.
• Avoid stumps, stones, deep ruts, sharp
objects and other hazards that may
cause tire damage.
NOTE: To seal tire punctures and prevent flat
tires due to stow leaks, tire sealant may be pur-
chased from your local parts dealer. Tire seal-
ant also prevents tire dry rot and corrosion.
OPERATOR PRESENCE SYSTEM AND
REVERSE OPERATION SYSTEM (ROe)
Be sure operator presence and reverse
operation systems are working properly. If
your tractor does not function as de-
scribed, repair the problem immediately.
• The engine should notstart unlessthe brake
pedal isfully depressed, and the attachment
clutch control is in the disengaged position.
CHECK OPERATOR PRESENCE
SYSTEM
- When the engine is running, any at-
tempt by the operator to leave the seat
without first setting the parking brake
should shut off the engine.
, When the engine is running and the
attachment clutch is engaged, any at-
tempt by the operator to leave the seat
should shut off the engine.
o The attachment clutch should never op-
erate unless the operator is in the seat.
CHECK REVERSE OPERATION (ROS)
SYSTEM
- When the engine is running with the
ignition switch in the engine "ON" posi-
tion and the attachment clutch engaged,
any attempt by the operator to shift into
reverse should shut off the engine.
° When the engine is running with the
ignition switch in the ROS "ON" position
and the attachment clutch engaged,
any attempt by the operator to shift into
reverse should NOT shut off the engine.
ROS "ON" Position Engine "ON" Position
(Normal Operating)
BLADE CARE
For best results mower blades must be
sharp. Replace worn, bent or damaged
blades.
CAUTION: Use only a replacement
blade approved by the manufacturer of
your tractor. Using a blade not approved
by the manufacturer of your tractor is
hazardous, could damage your tractor and
void your warranty.
BLADE REMOVAL
1. Raise mower to highest position to al-
low access to blades.
NOTE: Protect your hands with gloves
and/or wrap blade with heavy cloth.
2. Remove blade bolt by turning counter-
clockwise.
3. Install new blade with stamped
"GRASS SIDE" facing the ground.
IMPORTANT: To ensure proper assembly,
center hole in blade must align with star
on mandrel assembly.
4. Install and tighten blade bolt securely
(45-55 Ft. Lbs. torque).
IMPORTANT: Special blade bolt is heat
treated.
Blade
Blade
(Special) X,_..
Mandrel
Assembly
iStar
Center Hole
BATTERY
Your tractor has a battery charging system
which is sufficient for normal use. How-
ever, periodic charging of the battery with
an automotive charger will extend its life.
, Keep battery and terminals clean.
• Keep battery bolts tight.
• Keep small vent holes open.
, Recharge at 6q0 amperes for I hour.
NOTE: The original equipment battery on
your tractor is maintenance free. Do not
attempt to open or remove caps or covers.
Adding or checking level of electrolyte is
not necessary.
2O
ij_kPRECAUCl
puede que de
las ruedas,
4, Apretar el
el rondo, rr
soltar el pe
atr&s hast_
(5) segund
procedimi_
5. Apague el
estacionar
6. Enganche
control de
conducir 0
esta secci_
7. Sentado e
el motor. E
motor, mu_
media (1/2
mano
8. Conduzca
aproximao
hacia mar=
Repita est
Su transmisi61
para la opera(
CONSEJOS
• No se pued
Ilantas cua_
adjunta al t_
• La segador
adecuada
al segar. V,
LA SEGAD
Ajustes de
• El lado izqt
usar para rl
• Maneje de
arguen en
Mantenga €
del tractor.
m&s pareja
uniforme.
• AI segar la.'
a ta derech
descarguer
cos, entrad
de una o d_
opuesta, hl
hasta qua 1