CRC SmartWasher SW-23 User manual

Operating Manual
;Bioremediation
Technology
;Powerful Cleaning
Performance
;No Hazardous
Waste Generation
;Non-Flammable

2
Contact CRC Industries at 800-556-5074 | smartwasher.com
WELCOME
Congratulations!
You have purchased the state-of-the-art SmartWasher®
Bioremediating Parts Washing System. The SmartWasher®
systems combine a powerful cleaning solution with the
bioremediating power of specially-bred Ozzy®microbes.
Once a SmartWasher®has been properly installed and
activated, it is literally ALIVE!
Your SmartWasher®
• IS a safer alternative than using traditional solvents
• USES the latest in bioremediation technology to
eliminate hazardous liquid waste
• HELPS deregulate and detoxify your workplace and
reduce government paperwork
• SAVES you money
The SmartWasher®is designed to safely and effectively
remove oil and grease from automotive and industrial parts.
It replaces hazardous solvent parts washers with aqueous-
based degreasing solutions called OzzyJuice®and microbe
impregnated particulate traps called the OzzyMat®.
The microbes impregnated into the OzzyMat®come to life
in the OzzyJuice®and break down, or “eat”, the grease, oil
and other contaminants in the solution leaving by – products
of harmless carbon dioxide and water – leaving nothing
hazardous to haul away.
OzzyJuice®is an award winning, pH neutral, non-caustic,
non-ammable and bioremediating degreasing solution.
Working in concert with our microbes (Ozzy®) these
superior products help eliminate or greatly reduce your
need to dispose of hazardous waste, giving you all the
performance you are accustomed to in a typical solvent
parts washer without all the hazards and hassles. You have
made a great decision.
Visit Smartwasher.com for videos
and product information.
Contents
Safety Instructions .............................3
Installation and Setup ...........................4
Proper Use, Care and Maintenance ................7
Frequently Asked Questions......................8
Troubleshooting...............................10
Warranty Registration ..........................14

3
Contact CRC Industries at 800-556-5074 | smartwasher.com
1. Care must be taken as burns can occur from touching
hot parts.
2. Do not operate SmartWasher®with a damaged cord or
if the equipment has been dropped or damaged until it
has been examined by a qualied service person.
3. Do not let a cord hang over the edge of the table,
bench, or counter or come in contact with hot
manifolds or moving fan blades.
4. If an extension cord is necessary, a cord with a current
rating equal to or more than that of the equipment
should be used. Cords rated for current lower than the
equipment may over heat. Care should be taken to
arrange the cord so that it will not be tripped over or
pulled. (Must be rated a minimum of 15A/110V)
5. Unplug equipment from electrical outlet when not in
use for an extended period of time. Never use the cord
to pull the plug from the outlet. Grasp plug and pull to
disconnect.
6. To reduce the risk of re, do not operate equipment
in the vicinity of open containers of ammable liquids
(gasoline).
7. Adequate ventilation should be provided when working
on operating internal combustion engines.
8. Keep hair, loose clothing, ngers, and all parts of body
away from moving parts.
9. To reduce the risk of electric shock, do not use on wet
surfaces or expose to rain.
10. Use SmartWasher®only as described in this manual.
Use only attachments and parts recommended by CRC
Industries.
11. ALWAYS WEAR SAFETY GLASSES. Everyday
eyeglasses only have impact resistant lenses, they are
not safety glasses.
12. It is good practice to wear gloves whenever using
industrial cleaning uids.
Safety Instructions
Please read this instruction manual carefully and completely to ensure
that your new SmartWasher®will operate at its maximum effectiveness.
When using your SmartWasher®, basic safety precautions should always be
followed, including:

4
Contact CRC Industries at 800-556-5074 | smartwasher.com
Your SmartWasher®is almost ready to use. (The OzzyMat®, support grid
and false bottom of the sink are packed inside the sink.) Visually inspect for
damage (minor scratches and scuffs are normal due to the molding process).
Parts Washer Setup
1. Remove the OzzyMat®from its package, unfold it and lay it on the mat support grid
located in the lowest level in the sink. Make sure to lay the OzzyMat®white side up.
2. Place the false bottom in position in the sink.
3. Form the exible nozzle to its desired shape and be sure that the parts brush is inside
the sink.
4. DO NOT PLUG UNIT IN BEFORE ADDING OZZYJUICE®.
5. At start-up, carefully add OzzyJuice®to the SmartWasher®by slowly pouring the
solution directly into the sink. Refer to the chart below for amounts.
6. Plug the unit into a 115VAC GFCI electrical outlet.
7. The SmartWasher®will take approximately four hours to heat up to its selected optimal
temperature of 105°F (+-2°) (40°C) (+-1°) OR 115°F (+-2°) (46°C) (+-1°). This temperature
will be maintained as long as the SmartWasher®is plugged in and full of OzzyJuice®. (If
the “add uid light” is on, the heater automatically shuts off.)
Installation and Setup
Fill Amounts
• Remove the false bottom and check to make sure
the mat support grid is in the bottom of the sink.
• Remove and discard packing material.
Parts Washer Unit Start-Up Fluid
SW-23 15 gallons (three 5-gallon containers)
SW-25 25 gallons (ve 5-gallon containers)
SW-28 25 gallons (ve 5-gallon containers)
SW-28XE 25 gallons (ve 5-gallon containers)
SW-37 25 gallons (ve 5-gallon containers)

5
Contact CRC Industries at 800-556-5074 | smartwasher.com
CHECK LOCAL REGULATIONS:
You may be able to dispose of your used OzzyMat®as solid waste or with your other absorbent mats.
Installation and Setup Continued
Parts Washer Operation
1. The pump switch is attached to a ten minute timer.
Turning the switch ON (upward position) will start uid
owing for ten minutes. To restart the ow, turn the
switch OFF then ON again and the ow will restart for
another ten minutes.
2. Adjust the valve at the base of the nozzle to control the
ow of the uid through the nozzle. The valve at the
base of the brush hose controls the ow of uid through
the brush. Both outlets can be operated independently
or together.
OzzyMat®
Change the OzzyMat®
every 30 days or
once a month to
maintain cleaning
performance.
The OzzyMat®traps sludge and dirt as small as 50 microns.
It works effectively even when it appears dirty. At some
point, however, it will become saturated and unable to pass
uid freely and should be changed. The FL-4 Multi-layer
OzzyMat®allows you the benet of being able to peel layers
between mat changes.
OzzyMat®FL-4 Upkeep
1. Make sure the pump is not running.
2. Remove the false bottom from the sink.
3a. At 1 to 3 weeks: Peel away the top layer of the OzzyMat®and wring out any excess uid. Then, dispose of this layer
according to your local regulations.
3b. At 4 weeks: Remove the last layer of soiled OzzyMat®and set to one side of the lter support grid.
4. Remove a new OzzyMat®from its poly bag, unfold the mat and lay it on top of the lter support grid – white side up.
5. Roll up used OzzyMat®and stand vertically against the side of the sink to drain excess uid. This will allow good uid to drain
from the used mat before disposal.
6. Take the old, used OzzyMat®and place it into the poly bag the new mat came in.
7. Return the false bottom to its proper position.
8. Discard used OzzyMat®in accordance with your local regulations.

6
Contact CRC Industries at 800-556-5074 | smartwasher.com
Installation and Setup Continued
CHECK LOCAL REGULATIONS:
You may be able to dispose of your used OzzyMat®as solid waste or with your other absorbent mats.
OzzyJuice®Degreasing Solution
The SmartWasher®uses a specially formulated uid which
provides a combination of excellent cleaning characteristics,
safety and nutrition for the Ozzy®microbes. OzzyJuice®is
provided in ready-to-use containers.
Adding OzzyJuice®
Slowly pour a full container of OzzyJuice®directly into the
SmartWasher®sink. The “add uid light” should go out
when you have completed this process.
To help monitor and maintain the proper uid level, the
SmartWasher®is equipped with an “add uid light”.
When the “add uid light” light comes on the heater in
the unit will turn off until an ENTIRE 5 Gallon container of
OzzyJuice®is added.
The “add uid light” light will shut off and the heater will
come back on once the 5 Gallon container of OzzyJuice®is
added to the SmartWasher®.
Temperature Settings
• Your SmartWasher®should be plugged in 24 hours a day,
7 days a week to maintain optimal temperature.
• Depending on the OzzyJuice®solution shipped with your
SmartWasher®, the thermostat is factory-set to maintain
uid temperature between 105°F (+-2°) (40°C) (+-1°)
AND 115°F (+-2°) (46°C) (+-1°). This temperature provides
the optimum condition for effective cleaning and activity
of Ozzy®microbes.
• The heater will not operate when the uid level becomes
critically low. Lift the sink and check your uid level.
When the “add uid light” illuminates add 1 (5) gallon
container of OzzyJuice®. If, after a reasonable warm-up
period, the uid temperature seems too hot or too cold,
please refer to the “Troubleshooting” section of this
manual.
• If the temperature falls below the recommended
minimum, the system will still clean, but remediation
of the hydrocarbons by the Ozzy®microbe colony will
slow down. However, the microbes will not die. The
Ozzy®colony will become more active when the uid
temperature reaches the appropriate level.
Visit Smartwasher.com for videos
and product information.
Pump Switch
Up: 10 minutes
Down: 30 minutes
Temperature Switch
Up: 105°F
Down: 115°F

7
Contact CRC Industries at 800-556-5074 | smartwasher.com
Suggested Annual Maintenance
1. Pump out the uid into containers until the machine is drained.
2. Unplug the SmartWasher®.
3. Remove the sink from the base. Inspect and remove any sludge that
might have accumulated on the bottom of the unit.
4. Clean the base with water to remove any debris.
5. Visually check the condition of the hoses, connectors, etc. If everything
appears to be in good working condition, reassemble sink, change
OzzyMat®, and return the OzzyJuice®to the SmartWasher®.
6. Simply perform the annual maintenance described above and then add
OzzyBooster®for an extra supply of microbes to bring your uid back into
conformity. If your uid has developed an odor, you may also add Odor
Neutralizer.
7. Maintenance may need to be performed more often depending on usage
and/or application.
Proper Use, Care and
Maintenance
CHECK LOCAL REGULATIONS:
You may be able to dispose of your used OzzyMat®as solid waste or with your other absorbent mats.
Visit Smartwasher.com for videos
and product information.
Change the OzzyMat®
To maintain the effectiveness and
performance of the OzzyJuice®
change the OzzyMat®once a month.

8
Contact CRC Industries at 800-556-5074 | smartwasher.com
What is BIOREMEDIATION?
Bioremediation is the use of biological agents such as microbes
or plants to break down or neutralize “hazardous substances”
or “contaminants” thereby removing hazardous chemicals from
the environment. The process of bioremediation is listed as
one of the Environmental Protection Agency’s (EPA) innovative
technologies.
How is “Bioremediating” different from
“Biodegradable”?
BIOREMEDIATION is the use of natural biological agents
such as microbes to break down or neutralize “hazardous
substances” or “contaminants”. FOR EXAMPLE: In the
SmartWasher®, Ozzy®(s), natural biological agents or microbes,
break down the carbon- based contaminants (grease and
oil) and turn them into harmless carbon dioxide and water.
BIODEGRADABLE means that a substance or mixture is
subject to or could be broken down by biological agents into
smaller compounds, in its virgin state only by natural means.
Who and what is Ozzy®?
Ozzy®is the name we selected for the blend of nonpathogenic
(harmless to humans) microbes in the SmartWasher®system.
Our microbes, Ozzy®eat potentially harmful hydrocarbon
wastes in the SmartWasher®and transform these wastes
into very small quantities of carbon dioxide and water. Similar
types of microbes have been used for many years in various
bioremediation applications, such as oil spills, including the Gulf
of Mexico spill in 2010, and the Exxon Valdez disaster in 1989.
What happens to the grease, oil and other
contaminants in the SmartWasher®?
Grease, oil and other contaminants are bioremediated in the
SmartWasher®– transformed into harmless, non-hazardous
by-products such as carbon dioxide and water. Particulate
matter, such as sand, grit, dirt and paint chips are trapped in
the OzzyMat®to be disposed of properly.
How well does OzzyJuice®clean?
OzzyJuice®is extraordinarily powerful and cleans extremely
well. OzzyJuice®is a surfactant-based aqueous solution that
breaks down the surface tension between the grease and
the part rather than dissolving it; the grease actually lifts
off the parts leaving behind clean surfaces. Note that while
OzzyJuice®cleans differently than hazardous solvents or
mineral spirits, it is just as effective.
Will OzzyJuice®clean carburetors,
transmissions, aluminum, brakes and anything
else in my shop?
YES. Not only is OzzyJuice®effective on these parts, it will not
damage non-metal components that may be attached to the
parts being cleaned such as rubber or plastic ttings. As with
all parts cleaners, some items are going to become cleaner at
different rates than others due to the degree and type of grime
encountered.
How often do I change the uid (OzzyJuice®)?
If you are changing your OzzyMat®a minimum of once a
month, under normal use and with proper maintenance, you
should never have to change or haul away used OzzyJuice®.
This is one of the biggest advantages of the SmartWasher®
system. Ozzy®(s) microbes clean contaminants from the uid
through the process of bioremediation. This leaves you with
clean OzzyJuice®to work with day after day.
Why is the SmartWasher®heated?
Two reasons: First, it keeps Ozzy®eating at an optimal level
to clean the solution as quickly as possible. Secondly, warm
solution simply cleans better than cold solution. An added
benet to warm solution: it makes it more enjoyable to work
with, especially in winter.
Why doesn’t OzzyJuice®damage my hands
like solvents?
OzzyJuice®is a pH-neutral, non-caustic, water-based formula
that will not dry, crack or irritate the skin. Solvents can be
caustic and pull fat cells from the skin, possibly causing
extreme drying, redness, blisters, and other dermatological
problems.
Can I use OzzyJuice®in other parts washers?
We do not recommend that OzzyJuice®be used in other parts
washers. The OzzyJuice®and the SmartWasher®were made
to work together with variables such as specic temperatures,
compensation for foam, and so on. Also remember, the
Ozzy®(s) microbes are in the OzzyMat®and if the OzzyJuice®
is used in another machine it will not have the Ozzy®(s)
microbes to clean the uid.
Frequently Asked Questions

9
Contact CRC Industries at 800-556-5074 | smartwasher.com
How much oil can I put into the SmartWasher®
at a time?
As with all parts cleaners, excessive greases, oils and
uids should be disposed of prior to washing parts. The
SmartWasher®can handle large, tough, dirty jobs, but was not
designed to be – nor should be treated as – a waste oil dump.
Can I use other uids in my SmartWasher®?
The SmartWasher®parts washing system has been
developed to work effectively as a whole: SmartWasher®,
OzzyJuice®and OzzyMat®. Other solutions may damage the
machine or kill Ozzy®, thereby eliminating the advantages
of the SmartWasher®. The use of other solutions in the
SmartWasher®will void the warranty.
Can the SmartWasher®overheat if the
OzzyJuice®gets low?
NO. The heater is automatically de-activated when the “add
uid light” indicator light is illuminated. While the pump will
continue to operate, the heater will not be reactivated until (1)
entire 5 gallon container of OzzyJuice®is added to the system
and the “add uid light” indicator light is off.
Can I simply add water to the SmartWasher®to
adjust the uid level?
NO. Adding water will dilute the OzzyJuice®, severely
impacting its performance.
How often do I add OzzyJuice®to the
SmartWasher®?
The SmartWasher®comes equipped with an “add uid light”
which illuminates when you are low on uid. When this light is
on simply add (1) 5 gallon container of OzzyJuice®to bring the
uid level up to normal. On average, with normal use, you will
add (1) 5 gallon container of OzzyJuice®approximately every six
to eight weeks.
How quickly can Ozzy®break down oil and
grease?
Once activated, the Ozzy®(s) are constantly eating. Assuming
the system is operating optimally (OzzyJuice®temperature
between 105°F - 115°F and the OzzyMat®routinely changed
a minimum of once every 30 days) the rate at which the
hydrocarbons can remediate can approach 80% every seven
days. Analyses performed on samples of used OzzyJuice®
from operating SmartWasher®systems consistently show
oil and grease levels in the 1,400 parts per million range. BY
COMPARISON, used, non-bioremediating, aqueous cleaners
can average over 20,000 parts per million of oil and grease.
How often do I change the OzzyMat®?
At least once a month. This simple act accomplishes three
things: First, it keeps trapped contaminants from reaching
inappropriate levels. Secondly, Ozzy®microbes are introduced
into the SmartWasher®system through the OzzyMat®. Every
time you change the OzzyMat®you introduce fresh Ozzy®(s)
to the existing microbe colony which keeps the system
working at an optimum level. Finally, changing the OzzyMat®
keeps sludge from building up in the base of the unit. If the
OzzyMat®is not changed regularly and allowed to become
clogged, large contaminants can ow into the reservoir via
the overow holes in the sink, potentially causing sludge to
build up.
Does anything kill Ozzy®?
YES. Any biocides designed to kill microbes, such as bleach
and Lysol®, will kill Ozzy®; chemicals that kill living things like
some strong pesticides and rat poison may be harmful to
Ozzy®.
How do I dispose of the OzzyMat®?
In many areas the OzzyMat®can be disposed of in a non-
leaching, sealed manner, and disposed of as solid waste. But
it must always be disposed of in accordance with the National,
State or local regulations.
What do I do if the OzzyMat®clogs up quickly
with grease?
The FL-4 OzzyMat®has 4 layers intended to be peeled away
weekly, which helps eliminate unnecessary clogging. You
need to make sure you are peeling away the individual layers
on a weekly basis. Change the entire OzzyMat®on the 4th
week OR every month. Make sure to remove any excess
grease, dirt and debris from dirty parts prior to washing.
Is there a warranty for the SmartWasher®?
The SmartWasher®is warranted against defects for one year.
For more detailed information, please refer to the warranty
section of this manual or visit smartwasher.com.
Frequently Asked Questions Continued

10
Contact CRC Industries at 800-556-5074 | smartwasher.com
Troubleshooting
Issue: Machine Does Not Power On
Image ExampleProcess StepsProcess
Ensure outlet has 120v.A
If not, check circuit breaker or try another
outlet.
B
Image ExampleProcess StepsProcess
If there is power, call CRC Technical Service.A
If there is no power, replacethe power cord.B
CRC Replacement Part: Power Cord Kit
Legacy numberItem numberMachine Model
148631750066ALL Models
Replacement Part (If required)
Step 1Check to ensure machine is plugged in
Step 2Check voltage at the circuit board where
power cord plugs in
4
Issue: Machine Does Not Pump
Process Process Steps
AEnsure the switch is in the “On” position.
BEnsure Pump LED is on solid (If it is go to step 2).
CIf Pump LED is not on solid, call CRC Technical Service.
Step 1Remove the four or six Phillips head
screws on the control box lid.
Process Process Steps
A
Check for 120 volts coming out of the circuit board at the connection
terminals. Unplug the 1 brown or black, 1 blue or white wire, and 1 green or
green with yellow tracer.
BIf 120 volts is present out of the top and bottom terminals, replace the
pump. Ensure the switch is in the “ON” position when testing.
CIf 120 volts is not present, check for voltage across the fuse. If blown,
replace fuse and pump. Do not replace just the fuse.
DIf the fuse is good and no voltage present, replace the control box.
Step 2Pump LED is SOLID
Pump Fuse
1 AMP Slow Blow
Pump Terminals
Top: (Hot) Brown or Black
Middle: (Neutral) Blue or White
Bottom: (Ground) Green or Green
with Yellow Tracer
5

11
Contact CRC Industries at 800-556-5074 | smartwasher.com
Troubleshooting Continued
Issue: Machine Does Not Heat (Part 1)
Step InstructionsProcess
Check the OzzyJuice®level to ensureits above thescrewon the probe.A
If not, add more OzzyJuice® and check for the light to go out.
Once the light has gone out, allow 2-3 hours for the machine to heat back
up.
B
Step 1Is the RED ADD fluid light on?
If not continue to step 3
Step InstructionsProcess
Re-check the fluid level is above the probe screw. If not, add more
OzzyJuice® until above screw.
A
If the Red light still stays on, replace the temperatureprobe.B
Model
SW-37SW-28 / XESW-25SW-23Part
1005067 /
14793
1005065 /
14791
1005065 /
14791
1005065 /
14791
Probe
CRC Spare Part Numbers
Step 2Is the RED ADD fluid light still on?
Tip: “Red light is found on the control box
on the side of the machine”.
6
Issue: Machine Does Not Heat (Part 2)
Process StepsProcess
Check the flash pattern of the TEMP LED.A
If the TEMP LED is flashing rapidly (faster than POWER LED) = replace the probe.B1
If the TEMP LED is flashing the same rate as the POWER LED and the HEATER LED
is off and the fluid is cold = replace the probe.
B2
If the HEATER LED is on solid, go to step 4.B3
Step 3Remove the four or six Phillips head
screws on the control box lid.
Model
SW-37SW-28 / XESW-25SW-23Part
1005067 /
14793
1005065 /
14791
1005065 /
14791
1005065 /
14791
Probe
CRC Spare Part Numbers
7

12
Contact CRC Industries at 800-556-5074 | smartwasher.com
Troubleshooting Continued
Issue: Machine Does Not Heat (Part 3)
Process StepsProcess
Check for 120 volts coming out of the circuit board at the connection terminals.
Unplug the 2 black and 1 yellow wires.
A
If 120 volts is present out of the top and bottom terminals, you will need to replace
the heater element.
B
If 120 volts is not present, check for voltage across the fuse. If blown, replace fuse
and heater. Heater spec are 14.1ohms (+/-1 ohm) across 2 black wires.
C
If the fuse is good and no voltage present, replace the control box.D
Inspect front and back of circuit board for discoloration or burn marks, if so
replace the control board assembly as well.
*
Heater Terminals
Top: (Line) Black
Middle: (Neutral) Black
Bottom: (Ground) Yellow
Heater Fuse
10 AMP Slow Blow
Step
4
Heater LED is on solid and the
OzzyJuice® is cold.
8
Replacement Part Numbers
SW-37SW-28 / XESW-25SW-23Model
1005067 / 147931005065 / 147911005065 / 147911005065 / 14791Probe
1005121 / 148551005073 / 147991005073 / 147991005072 / 14798Heater
1750059 / 147941750059 / 147941750059 / 147941750059 / 14794Heater Fuse
1005140 / 148781004888 / 142851004888 / 142851005141 / 14879Pump
1750060 / 147951750060 / 147951750060 / 147951750060 / 14795Pump Fuse
1005125 / 148591005123 / 148571005123 / 148571005124 / 14858Control Box
9

13
Contact CRC Industries at 800-556-5074 | smartwasher.com
Troubleshooting Continued
Machine Cleaning Performance Guide
Suggested SolutionPossible CauseIssue
1) Replace OzzyMat® with a new mat, soak mat for 10 minutes and
allow microbes to clean solution over night.
2) Usage of CRC OzzyBooster® recommended.
3) Review options with Technical Service.
Lack of filter maintenance
OzzyJuice® does not clean
1) Dry part and apply lubricant or corrosion inhibitor, such as CRC
3-36®, Power Lube®, SP-400™, Rust-Block™, or paint.
Part has been cleaned to bare metal and is
exposed to atmospheric conditions
Parts are flash rusting after
cleaning
1) Peel a filter layer or change Filter Mat if due for monthly service.
2) Safely unblock filter basket.
Filter Mat has become clogged
Filter basket has become blocked
Sink is slow to drain
1) Replace OzzyMat® with a new mat, soak mat for 10 minutes and
allow microbes to clean solution over night.
2) Usage of CRC OzzyBooster® recommended.
3) Review options with CRC Technical Service.
Lack of filter maintenance
Fluid has odor
10
Troubleshooting Flow Chart
11

14
Contact CRC Industries at 800-556-5074 | smartwasher.com
DISCALIMER
The SmartWasher® is designed exclusively for removing oil and grease from automotive and
industrial parts, and then remediating the residue. Any other use of the system, such as dumping
waste oil, is not recommended and will cause damage to the system.
CRC Industries, Inc. cannot be responsible for any damage resulting from improper, inappropriate, or
unauthorized use.
IN ADDITION
The OzzyMat® must be disposed of in accordance with the Federal, State, and local regulations. In
many areas, the OzzyMat® can be disposed of in a non-leaching, sealed manner and disposed of as
ordinary solid waste in accordance with the Federal, State, and local regulations.
The OzzyMat® needs to be changed a minimum of once a month or every 30 days. Under normal
use and with proper maintenance, used OzzyJuice® should never need to be changed or hauled
away.
CRC Industries, Inc. accepts no responsibility or liability for users’ failure to comply with the Federal,
State, and local regulations.
WARRANTY
CRC Industries, Inc. will replace, at no charge to the original purchaser (end user), any part or parts
found to be defective in material or workmanship, when part is returned to our factory within 12
(twelve) months from date of purchase.
Transportation charges to be paid by the purchaser. In the event of any modication to the unit,
misuse, negligence, or accident, or the use in the SmartWasher® system of uids or lters other than
those specically authorized by CRC Industries, Inc., the warranty is void.
EXCEPT FOR THE PARTS WARRANTY SET FORTH ABOVE, CRC INDUSTRIES, INC. MAKES
NO WARRANTY WHATSOEVER WITH RESPECT TO THE SMARTWASHER, INCLUDING ANY
WARRANTY OF MERCHANTABILITY OR WARANTY OF FITNESS FOR A PARTICULAR PURPOSE,
WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE,
USAGE OF TRADE OR OTHERWISE. IN NO EVENT SHALL CRC INDUSTRIES, INC. BE LIABLE FOR
CONSEQUENTIAL, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR PUNITIVE DAMAGES, LOST
PROFITS OR REVENUES OR DIMINUTION IN VALUE.
The manufacturer reserves the right to make changes in design or improvements to its product
without imposing any obligation on itself to install the same on its product previously sold.
Warranty Registration

15
Contact CRC Industries at 800-556-5074 | smartwasher.com
CRC Industries, Inc.
smartwasher.com
800.556.5074
®2023 CRC INDUSTRIES, INC.