Creative Play AT6-L User manual

REF: AT6-L - ADVENTURE TRAIL 6
pg 1 of 16 14.03.22
AT6-L - ADVENTURE TRAIL 6
Installation Instructions
INSTRUCTIONS SHOWN ARE FOR THE STANDARD AT6 - BUT THE
GROUNDPLAN HAS BEEN REVISED TO CREATE THE L-SHAPE LAYOUT

REF: AT6-L - ADVENTURE TRAIL 6
pg 2 of 16 14.03.22
PARTS REQUIRED
U1
AT
U2
AT
U3
AT
U4
AT
U5
AT
U6
AT
U7
AT
UPRIGHT TIMBERS
*PLEASE NOTE ALL H TIMBERS ARE PRE-ASSEMBLED WITH PLAYTEC L’s AND/OR HEXBOARD (AS SHOWN ABOVE)
CODE QTY SIZE END ADDITIONAL
INFORMATION
AT - U1 4 1800 - UPRIGHT TIMBERS
AT - U2 1 2715 END CAP UPRIGHT TIMBERS
AT - U3 1 2715 END CAP UPRIGHT TIMBERS
AT - U4 1 3000 - UPRIGHT TIMBERS
AT - U5 1 3000 UPRIGHT TIMBERS
AT - U6 1 2335 END CAP UPRIGHT TIMBERS
AT - U7 1 1055 END CAP UPRIGHT TIMBERS

REF: AT6-L - ADVENTURE TRAIL 6
pg 3 of 16 14.03.22
H1
AT
H2
AT
H3
AT
H4
AT
H5
AT
H6
AT
H7
AT
HORIZONTAL TIMBERS
*PLEASE NOTE ALL H TIMBERS ARE PRE-ASSEMBLED WITH PLAYTEC L’s AND/OR HEXBOARD (AS SHOWN ABOVE)
CODE SIZE QTY START END ADDITIONAL
INFORMATION
AT - H1 900 1 END CAP END CAP HORIZONTAL TIMBER
(HEXA GRIP SLAT)
AT - H2 2100 2 PLAYTEC L’S PLAYTEC L’S HORIZONTAL TIMBER
AT - H3 900 1 END CAP END CAP HORIZONTAL TIMBER
(HEXA GRIP SLAT)
AT - H4 2010 1 END CAP END CAP HORIZONTAL TIMBER
(HEXA GRIP SLAT)
AT - H5 2100 1 PLAYTEC L’S PLAYTEC L’S HORIZONTAL TIMBER
AT - H6 2160 1 END CAP END CAP HORIZONTAL TIMBER
(HEXA GRIP SLAT)
AT - H7 2100 1 END CAP END CAP HORIZONTAL TIMBER
(HEXA GRIP SLAT)

REF: AT6-L - ADVENTURE TRAIL 6
pg 4 of 16 14.03.22
x1
x1
TRAVERSE ROPE
ROPE BRIDGE
SWINGING ROPE CHAIN
CLIMBING PANELS (LOWER)
SWINGING ROPES
CLIMBING PANELS (UPPER)
x23 x23
656.M12 102003-01 - M12
x8
274.M12X200
x2 x2
x3 x1
PARTS REQUIRED

REF: AT6-L - ADVENTURE TRAIL 6
pg 5 of 16 14.03.22
x1x2x47
274.M12X220M12 SOCKET NUT (50MM)
274.M12X180
97.M8X80CSK
PARTS REQUIRED
x1 x2
CONSISTS OF
SHACKLE / BOLT / NYLOC / CAP
349.742.D-SHACKLE ‘SET’

REF: AT6-L - ADVENTURE TRAIL 6
pg 6 of 16 14.03.22
FOUNDATION DETAILS
U1 U1
U1 U1
U4 U3 U2
U6
U7
U5
DATUM POINT
0,0 X
Y 1055mm
1055mm
Y axis dimensions will be shown HORIZONTAL
X axis dimensions will be shown VERTICAL
POSTCONCRETE (400MM X 400MM)

REF: AT6-L - ADVENTURE TRAIL 6
pg 7 of 16 14.03.22
SURFACING DETAILS
= MINIMUM SPACE
= OVERALL AREA

REF: AT6-L - ADVENTURE TRAIL 6
pg 8 of 16 14.03.22
INSTRUCTIONS SHOWN ARE FOR THE STANDARD AT6 - BUT THE
GROUNDPLAN HAS BEEN REVISED TO CREATE THE L-SHAPE LAYOUT
INSTALLATION INSTRUCTIONS
A) THE ORDER OF THE INSTALLATION INSTRUCTION HIGHLIGHT
WHERE THE MAIN CHANGE OF ‘SHAPE’
C) U4 TIMBER IS DRILLED FOR THE ROPE WALK CHAIN (ENSURE THIS
IS POSITIONED AS SHOWN ABOVE
9
STEP (9) - THE TIMBER / REMAINING ITEMS TO BE POSITONED AS
SHOWN ABOVE TO CREATE THE L-SHAPE
STEP (11) - HOLE WILL NEED TO BE DRILLED THROUGH THE PLAY-
TEC PANEL TO ATTACHED THE CHAIN FOR THE ROPE WALK
9
11
U4

REF: AT6-L - ADVENTURE TRAIL 6
pg 9 of 16 14.03.22
INSTALLATION INSTRUCTIONS
1
2ATTACH TIMBER H1
POSITION THE UPRIGHT TIMBERS
USING 274.M12X200 / 656.M12 / 102003-01, SECURE HEXBOARD WITH M8X80MM WOOD SCREWS
FOLLOWING FOUNDATION DETAILS
H1
U1
AT
U2
AT
U3
AT
U4
AT
U5
AT
U6
AT
U7
AT

REF: AT6-L - ADVENTURE TRAIL 6
pg 10 of 16 14.03.22
INSTALLATION INSTRUCTIONS
3
4ATTACH TIMBER H3
ATTACH H2 TIMBERS USING PLAYTEC L’S
USING 274.M12X200 / 656.M12 / 102003-01
USING M8X80MM WOOD SCREWS, TAKE CARE THAT SCREWS DO NOT ‘CROSS’
H2
H2
H3
NOTES:
H3 HEXBOARD SLAT WILL NOT BE
ATTACHED UNTIL STEP 7

REF: AT6-L - ADVENTURE TRAIL 6
pg 11 of 16 14.03.22
INSTALLATION INSTRUCTIONS
5
6ATTACH TIMBER H4 AND LOWER PLAYTEC CLIMBING PANEL SHOWN
ATTACH ROPE BRIDGE
USING 274.M12X180 & 220 / 656.M12 / 102003-01 AND M8X80MM WOOD SCREWS
USING 656.M12 / 102003-01
H4
NOTES:
ATTACH PANEL ON OPPOSITE FACE TO
BEAM
ONE LOWER PLAYTEC PANEL HAS
HOLE DRILLED FOR BOLT (SEE CNC) 220 BOLT
180 BOLT
BOLT

REF: AT6-L - ADVENTURE TRAIL 6
pg 12 of 16 14.03.22
INSTALLATION INSTRUCTIONS
7
8ATTACH REMAINING 3 PLAYTEC CLIMBING PANELS
ATTACH H3 HEXBOARD SLAT
USING 8X80MM WOOD SCREWS
USING 8X80MM WOOD SCREWS TO COVER COUNTERSUNK BOLT
H3
NOTES:
THIS PANEL IS ALREADY ATTACHED AS
PER STEP 6
NOTES:
ENSURE SECOND SET OF PANELS
ARE ON OPPOSITE FACE TO FIRST

REF: AT6-L - ADVENTURE TRAIL 6
pg 13 of 16 14.03.22
INSTALLATION INSTRUCTIONS
9
10 ATTACH SWINGING ROPES TO TIMBER H5
ATTACH TIMBER H5 USING PLAYTEC L’S
USING 656.M12 / 102003-01
USING 8X80MM WOOD SCREWS
H5

REF: AT6-L - ADVENTURE TRAIL 6
pg 14 of 16 14.03.22
INSTALLATION INSTRUCTIONS
11
ATTACH TIMBER H6
ATTACH SWINGING ROPE CHAIN
USING 274.M12X200 / 656.M12 / 102003-01
USING M12 X 50MM SOCKET NUT, D - SHACKLE AND EYEBOLT SHOULD BE PRE-ATTACHED TO CHAIN
12
H6

REF: AT6-L - ADVENTURE TRAIL 6
pg 15 of 16 14.03.22
ATTACH TRAVERSE ROPE ABOVER TIMBER H6
INSTALLATION INSTRUCTIONS
13
14 ATTACH TIMBER H7
USING 274.M12X200 / 656.M12 / 102003-01
USING 656.M12 / 102003-01
H6
H7

REF: AT6-L - ADVENTURE TRAIL 6
pg 16 of 16 14.03.22
ADDITIONAL DIMENSIONS