Creative Play SANDHUT MAJOR SB103 User manual

SANDHUT MAJOR
Installation Instructions
REF: SB103 - SANDHUT MAJOR
pg 1 of 12

pg 2 of 12 REF: SB103 - SANDHUT MAJOR
PARTS requiredPARTS required
x2 (PRE-ASSEMBLED SIDE A) x1 (PRE-ASSEMBLED SIDE B)
x1 (PRE-ASSEMBLED SIDE C)
x2 (HEX SLATS)
x1 (PLAYTEC PANEL - SIDE C)
x1 (HEX STEP)

pg 3 of 12 REF: SB103 - SANDHUT MAJOR
PARTS requiredPARTS required
x6 (FM180 ‘ Brass screws’)
x47 (FM80 ‘ Brass screws’)
x1 (PRE-ASSEMBLED FLOOR) x2 (HEX LID - 2 SIDES)
x2 (STEP PLAYTEC CAPS) x2 (STEP TIMBERS - SB103b)

pg 4 of 12 REF: SB103 - SANDHUT MAJOR
PARTS required ( SANDHUT MAJOR ROOF )
x12 (ROOF CLIPS)
x1 (TOP ROOF CLIP)x2 (SIDE ROOF )
x1 (FRONT ROOF)
x2 (HEX ROOF SUPPORT)
x1 (BACK ROOF)
x15 (N1 - TORKTAINER)
x 6 (N3 - TORKTAINER)
x 21 (3B- TORKTAINER) x8 (FM80 ‘ Brass screws’)

pg 5 of 12 REF: SB103 - SANDHUT MAJOR
TOOLS required
TIMBERS required
SB103a
SB103a SB103a
SB103a

pg 6 of 12 REF: SB103 - SANDHUT MAJOR
Foundation Details
TIMBER SUPPORT POST
CONCRETE
SOIL
FINISHED GROUND LEVEL
450 150
600
1585
1585

pg 7 of 12 REF: SB103 - SANDHUT MAJOR
Attach SIDES A AND B to UPRIGHTS
Using FM80 BRASS WOOD SCREWS
ENSURE:
EACH SIDE IS FLUSH WITH FLOOR - NO GAPS
ENSURE THAT THEY ARE ALL LEVEL WITH EACH OTHER ALSO
2
Installation Instructions
Install the timbers SB103a
Follow foundation details
1
Installation Instructions
SIDE A
SIDE A
SB103a
SB103a
SB103a
SB103a
SIDE B

pg 8 of 12 REF: SB103 - SANDHUT MAJOR
INSERT PRE-ASSEMBLED FLOOR
NO NEED TO FIX IN PLACE
4
Installation Instructions
Attach PLAYTEC PANEL to PRE-ASSEMBLED SIDE C and
Attach TO UPRIGHTS - as step 2
Using FM80 BRASS WOOD SCREWS
3
Installation Instructions
SIDE C

pg 9 of 12 REF: SB103 - SANDHUT MAJOR
SCREW ON 2ND STEP TIMBER TO EXISTING and CAP EACH END
Using FM180 BRASS WOOD SCREWS for the step and FM80 BRASS WOOD SCREWS for the caps
6
Installation Instructions
ATTACH 1 x STEP TIMBER TO MAIN STRUCTURE
Using FM180 BRASS WOOD SCREWS
5
Installation Instructions

pg 10 of 12 REF: SB103 - SANDHUT MAJOR
Installation Instructions
ATTACH HEX STEP PANEL ON TOP OF TIMBERS
ENSURE YOU SECURE LEAVING NO GAP BETWEEN PLAYTEC SIDE AND HEX - Using FM80 BRASS WOOD SCREWS
7
Installation Instructions
TIP!
LAY THE HEX LID ON TOP BEFORE
SCREWING SLATS INTO PLACE TO
ENSURE THEY ARE SNUG WITH THE LID,
HOLDING IT PLACE WHEN ON.
8Attach HEX SLATS ON TOP OF SIDE B and C
Using FM80 BRASS WOOD SCREWS

pg 11 of 12 REF: SB103 - SANDHUT MAJOR
Attach the roof Parts (SANDHUT MAJOR ROOF)
Using ‘TORKTAINERS’ and ‘Brass Screws’
9
Installation Instructions
1
2
a
3
4
5

pg 12 of 12 REF: SB103 - SANDHUT MAJOR
Additional Dimensions
1.89m 1.86m
2.36m
0.4m