Creative Play Galleon User manual

GALLEON
Installation Instructions
REF: VOY106 - GALLEON
pg 1 of 19

REF: VOY106 - GALLEONpg 2 of 19
Parts required
TIMBERS

REF: VOY106 - GALLEONpg 3 of 19
Parts required
x1 LEFT BACK
x1 RIGHT BACK
x1 BACK COVER
x2 ANCHOR
x1 LEFT FLAG
x1 RIGHT FLAG
x1 MIDDLE BACK
x1 MIDDLE FRONT
x2 MIDDLE SIDES
x1 HELM BACK x1 HELM
x1 SPACER

REF: VOY106 - GALLEONpg 4 of 19
Parts required
x1 FRONT LEFT
x1 FRONT RIGHT
x1 LEFT DOLPHIN
x1 RIGHT DOLPHIN
x1 LEFT
x1 RIGHT
x1 FRONT COVER
x1 BOW COVER x1 BOW
x1 BACK SEAT x1 MIDDLE SEAT x1 FRONT SEAT

REF: VOY106 - GALLEONpg 5 of 19
Parts required
x1 BACK FLOOR x1 FRONT FLOOR
x17 (TORK TAINERS)
4 x 0B/N1
10 x 3B/N1
3 x 4B/N3
x2 (M12 NYLOC)
x58 (FM80 ‘BRASS SCREW’)
x4 (FM180 ‘BRASS SCREW’)
x4 (ANGLE CLEAT)
x2 (M12 x 200 square cup hex bolt)

REF: VOY106 - GALLEONpg 6 of 19
Foundation details
GROUND LEVEL
CONCRETE
TIMBER SUPPORT POST
SOIL
BACK
MIDDLE
FRONT

REF: VOY106 - GALLEONpg 7 of 19
Surfacing details
= MINIMUM SPACE
= SURFACING AREA

REF: VOY106 - GALLEONpg 8 of 19
Assembly instructions
1Attach the anchors and Angle cleats to the LEFT/RIGHT
BACK
Using 3B - N1 TORKTAINERS (ANCHORS) 0B - N1 TORKTAINERS ( ANGLE CLEATS)
2
NOTES:
BOTH SIDES
Attach the LEFT/RIGHT BACKS to the TIMBERS (V106B1/
V106B2/V106B3)
Using M12 CUP SQUARE BOLTS / NYLOCS / END CAPS AND ‘BRASS SCREWS’
V106B1
V106B3
V106B2
NOTES:
BOTH SIDES
Brass
Screws
NO CAP
REQUIRED
PRE-ASSEMBLED PIECE

REF: VOY106 - GALLEONpg 9 of 19
Assembly instructions
3Attach the COVER BACK to the TIMBER (V106B4)
Using ‘BRASS SCREWS’
4Place the BACK FLOOR and install LEFT/RIGHT BACKS
Using ‘BRASS SCREWS’
V106B4
NOTES:
BOTH SIDES
NO CAP
REQUIRED
PRE-ASSEMBLED PIECE

REF: VOY106 - GALLEONpg 10 of 19
Assembly instructions
5install BACK COVER
Using ‘BRASS SCREWS’
6Attach the BACK SEAT to the TIMBERS (V106B2/V106B4)
Using ‘BRASS SCREWS’ and TORKTAINERS
TORKTAINERS

REF: VOY106 - GALLEONpg 11 of 19
Assembly instructions
7
8INSTALL TIMBERS (V106M1/V106M2)
Attach the FLAG to the TIMBER (V106M1)
Using ‘BRASS SCREWS’
V106M1
V106M1
V106M2
V106M2
ENSURE:
TO SLIDE MIDDLE SEAT OVER
V106M1 TIMBER
TOP VIEW
ENSURE:
LEAVE 12mm GAP BETWEEN TIMBERS AND FLOOR

REF: VOY106 - GALLEONpg 12 of 19
Assembly instructions
9
10
Attach the MIDDLE BACK and FRONT to the TIMBERS
(V106M1/V106M2)
Using ‘BRASS SCREWS’
Attach the MIDDLE SIDES,SEAT (clamp the seat with
HELM) to the TIMBERS (V106M1/V106M2)
Using ‘BRASS SCREWS’
V106M1
V106M2
V106M2

REF: VOY106 - GALLEONpg 13 of 19
Assembly instructions
11
12
Place the FRONT FLOOR
Attach the FRONT LEFT/RIGHT
Using ‘BRASS SCREWS’
NOTES:
Use V106F5 TO POSITION
DO NOT ATTACH V106F5
‘A’ TIMBERS ATTACHED TO THE LEFT
‘B’ TIMBERS ATTACHED TO THE RIGHT
V106F3A
V106F4A
V106F5
NOTES:
BOTH SIDES
DO NOT
SCREW
PRE-ASSEMBLED PIECE

REF: VOY106 - GALLEONpg 14 of 19
Assembly instructions
13
14 Attach the V106F5 TIMBER to the FRONT COVER
Using ‘BRASS SCREWS’
Attach the DOLPHIN and LEFT/RIGHT pieces
Using ‘BRASS SCREWS’ and TORKTAINERS
TORKTAINERS
3B / N1
NOTES:
BOTH SIDES
V106F5

REF: VOY106 - GALLEONpg 15 of 19
Assembly instructions
15
16 Attach the V106F6 TIMBER to the TIMBERS V106F3a/
b,V106F4a/b
Using ‘BRASS SCREWS’
Attach the BOW to the TIMBERS V106F3a/b,V106F4a/b
Using ‘BRASS SCREWS’
APPROX
APPROX

REF: VOY106 - GALLEONpg 16 of 19
Assembly instructions
17
18 Attach the V106F2 TIMBERS to the TIMBER V106F1
Using M12 CUP SQUARE BOLTS / NYLOCS
Attach the FRONT PIECE TO THE FLOOR
V106F2 V106F2
V106F1

REF: VOY106 - GALLEONpg 17 of 19
Assembly instructions
19
20 Attach the FRONT SEAT to the TIMBER V106F3a/b,
V106F4a/b,V106F1
Using ‘BRASS SCREWS’
Attach FRONT SUPPORT ASSEMBLY
Using ‘BRASS SCREWS’
ENSURE:
ASSEMBLY IS IN THE MIDDLE OF
THE V106F5 V106F6 TIMBERS
V106F1
V106F2
V106F2

REF: VOY106 - GALLEONpg 18 of 19
Assembly instructions
21 ATTACH THE FRONT BOW and PLAYTEC SPACER
Using TORKTAINERS
NOTES:
THE 2x SIDES WILL FLEX INTO POSIION

REF: VOY106 - GALLEONpg 19 of 19
Additional dimensions