Creative Play CH144 User manual

WEAVING BEAM
Installation Instructions
REF: CH144 - WEAVING BEAM
pg 1 of 9

PARTS required
REF: CH144 - WEAVING BEAM
x6
x2
x2
pg 2 of 9
x18 (FM80 ‘Brass screws’)
WB1
WB2
WB3
x12 (M12 Nylocs)
x12 (End Caps)
x2 (M12 thread bar @ 465mm)
x4 (M12 thread bar @ 370mm)
x3 (right)
x3 (left)

TOOLS required
REF: CH144 - WEAVING BEAM
pg 3 of 9

Foundation Details
REF: CH144 - WEAVING BEAM
TIMBER SUPPORT POST
CONCRETE
SOIL
FINISHED GROUND LEVEL
pg 4 of 9

Surfacing Details
REF: CH144 - WEAVING BEAM
pg 5 of 9
= MINIMUM SPACE
= SURFACE AREA

1
Assembly Instructions
REF: CH144 - WEAVING BEAM
Attach the WB1 / 2 / 3 Timbers together at either end
Using THREAD BAR (465mm) NYLOCS / END CAPS
pg 6 of 9
WB1
WB1
WB2
WB3
WB3
WB2

2Attach the remaining WB1 Timbers
Using THREAD BAR (370mm) NYLOCS / END CAPS
Assembly Instructions
REF: CH144 - WEAVING BEAM
pg 7 of 9
ENSURE END CAPS are used BOTH SIDES

Assembly Instructions
REF: CH144 - WEAVING BEAM
pg 8 of 9
3Attach the six hex board FEET
Using FM80 BRASS SCREWS
The FEET either end are
positioned 90mm from the
timber edge
All other fit are positioned
@ 140mm ‘GAPS’

Additional Drawings
REF: CH144 - WEAVING BEAM
pg 9 of 9