Creative Play CP060/SMS User manual

S-SHAPED
SQUARE Modular Seating
Assembly Instructions
REF: REF: CP060/SMS - S-SHAPED
pg 1 of 6

REF: REF: CP060/SMS - S-SHAPED
pg 2 of 6
PARTS required
QTY 2 (single support)
QTY 2 (double support)
x24 (120mm brass screws)
TOOLS required
QTY 2 (147mm x 47mm)
QTY 2 (147mm x 47mm)
T1b
T2
QTY 2 (147mm x 47mm)
T1a

REF: REF: CP060/SMS - S-SHAPED
SOIL
TIMBER SUPPORT POST
CONCRETE
pg 3 of 6
Foundation Details

If the bench IS pre-assembled follow foundation details
Attach bench slats (T1 & T2 timbers) to the support
assemblies Using 120mm brass screws
POSITIONING FOR SINGLE
SUPPORT LEG
REF: REF: CP060/SMS - S-SHAPED
pg 4 of 6
Assembly Instructions
1
2
5mm gap between T1 timber
slats
SINGLE SUPPORT LEG
SINGLE SUPPORT LEG
DOUBLE SUPPORT LEG
DOUBLE SUPPORT LEG
T1a
T2 T2
T1b
T1b
T1a

POSITIONING FOR DOUBLE
SUPPORT LEG
REF: REF: CP060/SMS - S-SHAPED
pg 5 of 6
Assembly Instructions
3Attach bench slats (T1 & T2 timbers) to the support
assemblies Continued....
4 x 120mm brass screws for each T1 /T2
timber (2 each end)
*IMPOTANT - DASHED LINE SHOWS BOLT LOCATIONS FOR
BENCH SUPPORTS - ensure the screws for the SLATS are
postioned either side
DOUBLE LEG ATTACHMENT DETAIL
SINGLE LEG ATTACHMENT DETAIL
5mm gap between T1 timber
slats

REF: REF: CP060/SMS - S-SHAPED
pg 6 of 6
Assembly Instructions
4Additional dimensions