Creative Play MOVING BEAM User manual

MOVING BEAM
Installation Instructions
REF: CH104 - MOVING BEAM
pg 1 of 7

REF: CH105 - MOVING BEAMpg 2 of 7
x4 (end caps)
Parts required
x4 (EYEBOLT x 130 )
x4 (Chain x 500mm)
x8 (QUICKLINK )
x1 (PRE-ASSEMBLED ‘BEAM’ SECTION)
( Cap on top )
MB1 QTY x 4
(90mm x 90mm)
x6 (M12 NYLOC)

REF: CH105 - MOVING BEAMpg 3 of 7
Foundation details
GROUND LEVEL
CONCRETE
TIMBER SUPPORT POST
SOIL
ENSURE:
Distance between floor and beam - minimum 200mm

REF: CH105 - MOVING BEAMpg 4 of 7
Surfacing details
= MINIMUM SPACE
= SURFACING AREA

REF: CH105 - MOVING BEAMpg 5 of 7
Assembly instructions
1Install the timbers (MB1)
ENSURE:
Ensure the eyebolt is as shown ABOVE / BELOW
ENSURE:
The holes are facing the correct direction
2Attach the Eyebolt to the Timber (MB1)
Using NYLOCKS / END CAPS
NOTES:
REPEAT for the remaining posts
x4

REF: CH105 - MOVING BEAMpg 6 of 7
3Attach the CHAIN to the EYEBOLT using a QUICKLINK
Use LOCK TIGHT to ensure the quick link remains CLOSED
4Attach the other END of the CHAIN to the BEAM
ASSEMBLY using QUICKLINKS
Use LOCK TIGHT to ensure the quick link remains CLOSED
NOTES:
REPEAT for the remaining chains
x4
x4
Assembly instructions

REF: CH105 - MOVING BEAMpg 7 of 7
Additional dimensions
ENSURE:
Distance between floor and beam
MINIMUM 200mm