Creative Play TIMBER PLAYHOUSE ARC User manual

TIMBER PLAYHOUSE ARC
Installation Instructions
REF: TPH102 - TIMBER PLAYHOUSE ARC
pg 1 of 19

pg 2 of 19 REF: TPH102 - TIMBER PLAYHOUSE ARC
PARTS required
DOOR ASSEMBLY FRONT ASSEMBLY
INNER FRONT ASSEMBLY
x1
Includes LARGE HINGES
and DOOR LATCH /
HANDLE
x1
Pre-assembled ‘DOUBLE FRAME’
x1

pg 3 of 19 REF: TPH102 - TIMBER PLAYHOUSE ARC
HEX BOARD FLOOR
front (2 x cut outs)
back (3 x cut outs)
BACK ASSEMBLY (inc windows)
PARTS required
INNER FRAME
x1
Pre-assembled
‘DOUBLE FRAME’
x1
includes clear acrylic windows
x2
(1 x FRONT FLOOR / 1 x BACK FLOOR)

pg 4 of 19 REF: TPH102 - TIMBER PLAYHOUSE ARC
PARTS required
FLOOR FRAME
SIDE TRIM (ship lap)
Additional Timbers
INNER TIMBERS
T3
T3
T3
T3
T4
T4
T5
T3
Consists of...
4 x T3 timbers (inc angle cleats) 715mm
2 x T4 timbers (half lap joint)
1 x T5 timber (half lap joint)
x8 x8
2 x 45x45 @ 2000mm this is to be used if required for the FRONT ASSEMBLY
x28 (FM80 WOOD SCREWS - 304 required)
x1 (End Caps)
x16 (7.5x60 MULTIFIX
SCREW - 34 required)
x172(7.5x40 MULTIFIX
SCREW - 72 required)
(FM80 WOOD SCREWS - 304 required)
(End Caps)

pg 5 of 19 REF: TPH102 - TIMBER PLAYHOUSE ARC
INNER ROOF
OUTER ROOF
R1
R1
R2
R3
R3
R1
R2
PARTS required
ROOFING (PLY SHEETS)
R1
R2
R3
QTY - 3
1220mm x 1900mm
QTY - 2
1080mm x 1900mm
QTY - 2
480mm x 1900mm
ARTIFICIAL GRASS
The roof will be covered using ARTIFICIAL GRASS -
REQUIRED -
1900mm x 3440mm

pg 6 of 19 REF: TPH102 - TIMBER PLAYHOUSE ARC
TOOLS required

pg 7 of 19 REF: TPH102 - TIMBER PLAYHOUSE ARC
Foundation Details
FRONT
BACK

pg 8 of 19 REF: TPH102 - TIMBER PLAYHOUSE ARC
= MINIMUM SPACE*
= SURFACE AREA*
Surfacing Details
*Minimum space & surfacing area
The minimum area and surfacing area has been included - this is shown
as a guide see individual INSTALLATION PLAN

pg 9 of 19 REF: TPH102 - TIMBER PLAYHOUSE ARC
Position & attach the BACK ASSEMBLY & FLOOR FRAME
Using 12 x 7.5x40 MULTIFIX SCREWS
Position & Attach the INNER FRONT ASSEMBLY
Using 4 x 7.5x40 MULTIFIX SCREWS & 2 x FM80 WOOD SCREWS
1
2
NOTES:
SKEW screw through the T3 timber into the
BACK ASSEMBLY
(circled right)
Installation Instructions
NOTES:
Use the FM80 WOOD SCREWS as shown left

pg 10 of 19 REF: TPH102 - TIMBER PLAYHOUSE ARC
Position & attach the INNER FRAME
Using 4 x FM80 WOOD SCREWS
Attach the HEX BOARD FLOOR - Front
Using 12 x 7.5x40 MULTIFIX SCREWS
3
4
NOTES:
SKEW screw through the T3 timber into the
INNER FRAME (circled right)
NOTES:
Screw through the HEX BOARD into the
FLOOR FRAME below
COUNTERSINK THE HOLES and ensure the
holes are UNIFORM
Installation Instructions

pg 11 of 19 REF: TPH102 - TIMBER PLAYHOUSE ARC
Attach the HEX BOARD FLOOR - BACK
Using 12 x 7.5x40 MULTIFIX SCREWS
Attach the T3 inner timbers to the INNER FRAME
Using 16 x 7.5x60 MULTIFIX SCREWS
5
6
Installation Instructions

pg 12 of 19 REF: TPH102 - TIMBER PLAYHOUSE ARC
Attach the INNER TIMBERS as shown below
SKEW screw into the INNER FRAMES
Position the FRONT ASSEMBLY
The FRONT ASSEMBLY is positioned 155mm away from the INNER FRONT assembly
7
8a
Installation Instructions

pg 13 of 19 REF: TPH102 - TIMBER PLAYHOUSE ARC
Additional FRONT ASSEMBLY supports
Attach the ADDITIONAL TIMBERS to the front assembly using 4 x FM80 WOOD SCREWS
8b
Installation Instructions
NOTES:
Attach the additional timbers to the FRONT ASSEMBLY - these will
need to be cut to size required and additional foundations dug

pg 14 of 19 REF: TPH102 - TIMBER PLAYHOUSE ARC
Attach the FIRST layer of PLY - INNER ROOF
Attach INNER ROOF R1 x 1 / R2 x 2 using 30 x 7.5x40 MULTIFIX SCREWS
Attach the SECOND layer of PLY - OUTER ROOF
Attach OUTER ROOF R1 x 2 / R3 x 2 using 30 x 7.5x40 MULTIFIX SCREWS
9a
9b
Installation Instructions
R3 R3
R2
R1
R1 R1
R2

pg 15 of 19 REF: TPH102 - TIMBER PLAYHOUSE ARC
Screw the ROOF layers into the FRAME below
Additional screws can be used and screwed into the T3 TIMBERS - circled below using 24 x 7.5x40 MULTIFIX SCREWS
9c
Installation Instructions
ENSURE:
Screws are INTO the frames below - make sure that no screws are
protruding from the ROOFS on the inside of the PLAYHOUSE
NOTES:
DASHED line shows main timber support centres

pg 16 of 19 REF: TPH102 - TIMBER PLAYHOUSE ARC
10
11
Installation Instructions
Attach ‘DOOR STOP’
Using FM80 WOOD SCREW / END CAP
Attach the DOOR ASSEMBLY
Using 16 x FM80 WOOD SCREWS (8 for the hinges brackets 8 for the LATCH)
NOTES:
Hinges will be PRE-ATTACHED it is
essential that the hinges are screws
through the INNER FRONT SECTION
and into the upright support
(highlighted RIGHT)
NOTES:
LATCH POSITION
(latch not shown below)

pg 17 of 19 REF: TPH102 - TIMBER PLAYHOUSE ARC
Installation Instructions
NOTES:
Artificial grass supplied =
1900mm x 3440mm
12
13
ARTIFICIAL GRASS
Glue the Artificial grass to the plywood roof
Attach the SIDE TRIMS (Shiplap)
Using 24 x 7.5x40 MULTIFIX SCREWS (6 for each board)
NOTES:
Position each board and
DRILL A PILOT HOLE before
screwing to the frame

pg 18 of 19 REF: TPH102 - TIMBER PLAYHOUSE ARC
Installation Instructions
14
15
SIDE TRIMS fixing locations
Screw through the ARTIFICIAL GRASS / PLY ROOF and into the support frames
SIDE TRIMS - Repeat for the opposite side
Using 24 x 7.5x40 MULTIFIX SCREWS (6 for each board)
NOTES:
Position each board and
DRILL A PILOT HOLE before
screwing to the frame

pg 19 of 19 REF: TPH102 - TIMBER PLAYHOUSE ARC
Additional Dimensions
SITE NOTES: