Creative Play WP102 User manual

COMPASS WALL PANEL
Installation Instructions
REF: WP102 - COMPASS WALL PANEL
pg 1 of 7

pg 2 of 7 REF: WP102 - COMPASS WALL PANEL
PARTS required
x1 Compass board
QTY x 4
Hammer in fixing
QTY x 4
RED CAP BOTTOM QTY x 4
SCREW
QTY x 4
nylon spacers
QTY x 4
Washer
QTY x 4
RED CAP TOP
NOTES:
The Hammer in fixing
includes the screw
TOOLS required

pg 3 of 7 REF: WP102 - COMPASS WALL PANEL
Installation Instructions
Attach the COMPASS BOARD to the WALL
Using M12 CUP HAMMER IN FIXING / SPACERS/ SCREWS / END CAPS
1

pg 4 of 7 REF: WP102 - COMPASS WALL PANEL
Additional Dimensions

pg 5 of 7 REF: WP102 - COMPASS WALL PANEL
OPTION for POSTS
PARTS required
QTY x 2
(90mm x 90mm)
PB1
x4 (M12 120 cup square hex)
x4 (End Caps)
x4 (M12 Nylocs)
Installation Instructions
Attach the COMPASS BOARD to the PB1 timbers
Using M12 CUP SQUARE BOLTS / NYLOCS / END CAPS
1
NOTES:
RED END CAP MUST BE POSITIONED AT
THE FRONT of the panel

pg 6 of 7 REF: WP102 - COMPASS WALL PANEL
SOIL
TIMBER SUPPORT POST
CONCRETE
Foundation Details

pg 7 of 7 REF: WP102 - COMPASS WALL PANEL
Additional Dimensions