Creative Play sr105 User manual

AEROPLANE DOUBLE SPRING RIDER
Installation Instructions
REF: SR105 - AEROPLANE DOUBLE SPRING RIDER
pg 1 of 7

pg 2 of 7
REF: SR105 - AEROPLANE DOUBLE SPRING RIDER
PARTS required
x1 ”RIGHT SIDE” OUTSIDE AEROPLANE
x1 ”RIGHT SIDE” INSIDE
x1 ”LEFT SIDE” OUTSIDE AEROPLANE
x1 ”LEFT SIDE” INSIDE
x2 GALV TUBE (OD 33.7mm)
x2 THREAD BAR 975mm
x1 PRE-ASSEMBLED SEAT AND SPRINGS

pg 3 of 7
REF: SR105 - AEROPLANE DOUBLE SPRING RIDER
TOOLS required
PARTS required
x12 (3B TORKTAINER)
x12 (N1 TORKTAINER NUT) x4 (M12 NYLOC)
x4 (M12 COVERED END)

pg 4 of 7
REF: SR105 - AEROPLANE DOUBLE SPRING RIDER
Foundation Details
SOIL
CONCRETE
ENSURE:
METAL PLATES IS BELOW
FINISHED GROUND LEVEL

pg 5 of 7
REF: SR105 - AEROPLANE DOUBLE SPRING RIDER
= MINIMUM SPACE
= SURFACE AREA
Surfacing Details

pg 6 of 7
REF: SR105 - AEROPLANE DOUBLE SPRING RIDER
ASSEMBLE LEFT and RIGHT, INSIDE and OUTSIDE playtec parts
Using 4 X 3B / 4 X N1 TORKTAINERS (EACH SIDE) - AT THIS STAGE - ONLY FIX HOLES SHOWN BELOW
ATTACH PRE-ASSEMBLED SIDE TO SEAT BRACKET
USING 2 X 3B/ 2 X N1 TORKTAINERS - EACH SIDE
1
2
ENSURE:
SEAT BRACKET SITS WITHIN RECESSED PART OF THE PLAYTEC
Installation Instructions

pg 7 of 7
REF: SR105 - AEROPLANE DOUBLE SPRING RIDER
ATTACH the HANDLE and FOOT REST to PLAYTEC SIDES
Using 975mm THREAD BAR (INSERT INSIDE GALV TUBE) and 2 X M12 NYLOCS / 2 X Covered end - (PER SIDE)
3
Installation Instructions
REPEAT
STEP 2 and 3 FOR
OTHER SIDE
Additional Dimensions
0.97m 1.07m
0.44m
0.90m