Creative Play MP101 User manual

DRUMS
Installation Instructions
REF: MP101 - DRUMS
pg 1 of 5

pg 2 of 5
REF: MP101 - DRUMS
PARTS required
TOOLS required
x3FM80 BRASS WOOD
SCREWS
x1 PRE-ASSEMBLED MUSIC
PLAY BOARD
x1RECESSED PLAYTEC
CIRCLE
x1 PLAYTEC RING
x2 OBLONG PLAYTEC
PIECES
x1 PLAYTEC BLOCK
x1PLAYTEC BEATER HOLDER
x1 BEATER WITH STEEL CORD

pg 3 of 5
REF: MP101 - DRUMS
Foundation Details
TIMBER SUPPORT POST
CONCRETE
SOIL
FINISHED GROUND LEVEL
450 150
600

pg 4 of 5
REF: MP101 - DRUMS
SANDWICH THE BEATER STEEL CORD
LOOP BETWEEN THE PLAYTEC RING
AND RECESSED PLAYTEC CIRCLE
FIX INTO PLACE USING 1 X FM80
BRASS WOOD SCREW
PUSH PLAYTEC BLOCK THROUGH THE HOLDER AND
MATCH UP THE TWO OBLONG PLAYTECS PIECES TO THE
HOLES
FIX INTO TIMBER WITH 2 FM80 BRASS WOOD SCREWS.
Installation Instructions
FIX BEATER TO LEFT TIMBER - BELOW MUSIC BOARD
USING 1 X FM80 BRASS WOOD SCREW
FIX BEATER HOLDER TO LEFT TIMBER - ABOVE MUSIC BOARD
USING 2 X FM80 BRASS WOOD SCREWS
1
2
ENSURE:
BEATER REACHES HOLDER
BEFORE SECURING

pg 5 of 5
REF: MP101 - DRUMS
Additional Dimensions
0.87M 0.16M
1.43M
0.60M
1.51M