Creative Play BATSMAN WITH MESH PANEL User manual

BATSMAN WITH MESH PANEL
Installation Instructions
REF: T113 - BATSMAN WITH MESH PANEL TARGET PANEL
pg 1 of 8

pg 2 of 8 REF: T113 - BATSMAN WITH MESH PANEL TARGET PANEL
PARTS required
x1 MESH FRAME
x3 MEDIUM POST x1 BATSMAN PLAYTEC PANEL
x1 STEEL FRAME

pg 3 of 8 REF: T113 - BATSMAN WITH MESH PANEL TARGET PANEL
PARTS required continued...
TOOLS required
x3 COLLAR CLAMP CLA008x6 COLLAR CLAMP CLA007
x32 (M10 ´NYLOC´) x32 (Covered Ends)
x27 (GRUB SCREWS M10x8mm
to be used on COLLAR CLAMPS
x 6 (M10 x 60 SOCKET BUTTON BOLTS)
x 21 (M10 x 70 SOCKET BUTTON BOLTS)
x 5 (M10 x 80 SOCKET BUTTON BOLTS)

pg 4 of 8 REF: T113 - BATSMAN WITH MESH PANEL TARGET PANEL
Foundation Details
MEDIUM POST
CONCRETE
SOIL
FINISHED GROUND LEVEL
450
750
600

pg 5 of 8 REF: T113 - BATSMAN WITH MESH PANEL TARGET PANEL
Installation Instructions
Attach the BATSMAN PANEL to STEEL FRAME
Using M10x70mm SOCKET BUTTON BOLTS / M10 NYLOCS / END CAPS
1
Notes:
SEE BELOW to ensure the correct holes are used
(Some will be left ‘EMPTY’ to bolt to the COLLARS)
BOLT HOLES CIRCLED RED -
Using 16 X M10x70mm SOCKET BUTTON BOLTS /
16 X M10 NYLOCS / 16 X COVERED ENDS
BOLT HOLES CIRCLED GREEN -
Using 4 X M10x80mm SOCKET BUTTON BOLTS /
4 X M10 NYLOCS / 4 X COVERED ENDS
SOCKET BUTTON BOLT
NYLOC
COVERED END

pg 6 of 8 REF: T113 - BATSMAN WITH MESH PANEL TARGET PANEL
Installation Instructions
Attach the ‘PANEL ASSEMBLY’ to the COLLAR CLAMPS
ENSURE CORRECT FIXINGS ARE USED FOR HOLES
2
Installation Instructions
NOTE: COLLARS ARE TO BE SLID ONTO POLES BEFORE ATTACHING TO BOARD
HOLES CIRCLED BLUE will be used to attach COLLARS
Using 6 X M10x60mm SOCKET BUTTON BOLTS / 6X M10 NYLOCS / 6 X COVERED ENDS
HOLES CIRCLED RED will be used to attach COLLARS
Using 5 X M10x70mm SOCKET BUTTON BOLTS / 5 X M10 NYLOCS / 5 X COVERED ENDS
HOLE CIRCLED GREEN will be used to attach COLLARS
Using 1 X M10x80mm SOCKET BUTTON BOLT / 1 X M10 NYLOC / 1 X COVERED END

pg 7 of 8 REF: T113 - BATSMAN WITH MESH PANEL TARGET PANEL
Ctnd....Attach the ‘PANEL ASSEMBLY’ to the COLLAR CLAMPS
2
Installation InstructionsInstallation Instructions
Tighten the GRUB screws on ALL COLLAR CLAMPS
There are 3 x GRUB screws per COLLAR CLAMP
Notes:
Collar clamps are positioned as shown RIGHT
(the clamp sits ‘behind ‘ the frame)
REPEAT FOR MIDDLE AND
OPPOSITE SIDE
3

pg 8 of 8 REF: T113 - BATSMAN WITH MESH PANEL TARGET PANEL
Additional Dimensions
2.7m 0.10m
2.41m