Creative Tru-VIEWLCD2200 User manual

Contents
Congratulations! ...................................................................................................... 1
Package Contents .................................................................................................... 1
Getting Started ........................................................................................................ 2
Insert Batteries .................................................................................................. 2
Connect Devices ............................................................................................... 2
Connect Power Adapter Cable ..................................................................... 2
Turn On LCD Display ...................................................................................... 3
Select Input Source ........................................................................................... 3
Overview ................................................................................................................... 4
LCD Display ....................................................................................................... 4
Remote control ................................................................................................. 6
Computer Monitor Connections ........................................................................ 8
DVI ........................................................................................................................ 8
VGA ...................................................................................................................... 8
Video Connections ................................................................................................. 9
Video .................................................................................................................... 9
S-Video ................................................................................................................ 9
YCbCr (Component) ..................................................................................... 10
YPbPr (HDTV) ................................................................................................. 10
Optional Audio Out Connections .................................................................... 11
Speakers or Amplifiers ................................................................................... 11
Using the On Screen Display (OSD) Menu .................................................... 12
Selecting OSD menu options ....................................................................... 12
Overview of OSD menu options ................................................................ 12
Frequently Asked Questions .............................................................................. 14
General Specifications .......................................................................................... 15
Important Safety Instructions ............................................................................. 16
Creative Limited Warranty ................................................................................ 17
Creative Customer Support Services .............................................................. 19
Support Services .............................................................................................. 19
Product Registration and Returns ............................................................... 19
Customer Support Services Centers ......................................................... 21
LCD Monitor.book Page 0 Tuesday, June 22, 2004 11:15 AM

Information in this document is subject to change without notice and does not represent a commitment on the part of
Creative Technology Ltd. Use of this product is subject to limited hardware warranty. Actual contents may differ slightly
from those pictured. No part of this manual may be reproduced or transmitted in any form or by any means, electronic
or mechanical, including photocopying and recording, for any purpose without the written permission of Creative Technology
Ltd.
Copyright © 2004 by Creative Technology Ltd. All rights reserved.
Version 1.0
June 2004
The Creative logo is a registered trademark of Creative Technology in the United States and/or other countries. All other
brand and product names are trademarks or registered trademarks of their respective holders and are hereby recognized
as such. All specifications are subject to change without prior notice. Actual contents may differ slightly from those pictured.
Notice for the USA
FCC Part 15: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, this notice
is not a guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician.
CAUTION: To comply with the limits for the Class B digital device, pursuant to Part 15 of the FCC Rules, this device
must be installed in computer equipment certified to comply with the Class B limits.
All cables used to connect the computer and peripherals must be shielded and grounded. Operation with non-certified
computers or non-shielded cables may result in interference to radio or television reception.
Modifications
Any changes or modifications not expressly approved by the manufacturer of this device could void the user’s authority
to operate the device.
Notice for Canada
This apparatus complies with the Class “B” limits for radio interference as specified in the Canadian Department of
Communications Radio Interference Regulations.
Cet appareil est conforme aux normes de CLASSE “B” d’interférence radio tel que spécifié par le Ministère Canadien
des Communications dans les règlements d’interférence radio.
Compliance
This product conforms to the following Council Directive:
Directive 89/336/EEC, 92/31/EEC (EMC), 73/23/EEC (LVD), as amended by directive 93/68/EEC.
Notice for Europe
Communication products for the European market comply with Directive R&TTE 1999/5/EC.
WARNING: Handling the cord(s) on this product may expose you to lead, a chemical
known to the State of California to cause cancer and birth defects or other reproductive
harm. Wash hands after handling.
LCD Monitor.book Page i Tuesday, June 22, 2004 11:15 AM

1
Congratulations!
We are confident that your new Creative Tru-VIEW LCD2200 LCD Display will bring you
many hours of fun and entertainment.
To learn how to take advantage of your LCD Display’s many features, we encourage you to
review this User’s Guide. If you have additional questions that are not answered in this User’s
Guide, you can contact your dealer, as he or she is your best source of local information. You
may also contact us directly. For our contact details, see “Creative Customer Support
Services” on page 19.
Package Contents
• The appearance of contents, like the Power Adapter cable, may vary depending on the region
of purchase.
• An optional TV Tuner module is available separately.
LCD Display
User’s Guide Power Adapter cableDVI cable
AA batteries
Remote control
LCD Monitor.book Page 1 Tuesday, June 22, 2004 11:15 AM

2
Getting Started
1
1Insert Batteries
Insert the supplied AA batteries into the remote control.
2
2Connect Devices
You can use your LCD Display as a computer monitor as well as a TV set. For information on
connecting devices, see “Computer Monitor Connections” on page 8, “Video Connections”
on page 9 and “Optional Audio Out Connections” on page 11.
3
3Connect Power Adapter Cable
Connect one end of the supplied Power Adapter cable to the Power connector on the
rear panel of your LCD Display, and the other end to a power outlet.
B
A
C
LCD Monitor.book Page 2 Tuesday, June 22, 2004 11:15 AM

3
4
4Turn On LCD Display
1. Make sure the power outlet is turned on (if necessary).
The Power LED (see on page page 4) lights up when your LCD Display is connected
to a power outlet.
2. On your LCD Display or remote control, press the Power button.
The Power LED turns off when you turn on your LCD Display.
3. On your LCD Display or remote control, press the Volume buttons to increase or
decrease the volume.
5
5Select Input Source
On your LCD Display, repeatedly press the INPUT button to select the input source that
you want. For example, if you have connected your LCD Display to your computer using a
VGA connection, repeatedly press the INPUT button until the VGA input is selected.
Or
On the remote control, press one of the Input buttons. Alternatively, repeatedly press the
GS button or VS button to switch between graphic input sources (HDTV, VGA and DVI) or
video input sources (TV, Video, S-Video and YCbCr).
To configure your LCD Display’s settings, see “Using the On Screen Display (OSD) Menu” on
page 12.
2
LCD Monitor.book Page 3 Tuesday, June 22, 2004 11:15 AM

4
Overview
LCD Display
8
5 6 74
2
3
1
2223 20 19 1821
10 12 13 14 15 16119 17
LCD Monitor.book Page 4 Tuesday, June 22, 2004 11:15 AM

5
1. Built-in speakers
2. Power LED
Indicates the power status of your LCD
Display. The LED lights up after you connect
your LCD Display to a power outlet, and
turns off when you turn on your LCD
Display.
3. Infrared receiver
4. Volume buttons
Adjusts the volume.
When the On Screen Display (OSD) menu is
displayed, press these buttons to increase or
decrease adjustable values of menu options.
For more information, see “Using the On
Screen Display (OSD) Menu” on page 12.
5. Channel buttons
Select TV channels.*
When the OSD menu is displayed, press
these buttons to scroll up and down the OSD
menu. For more information, see “Using the
On Screen Display (OSD) Menu” on page 12.
6. INPUT button
Selects an input source.
When the OSD menu is displayed, press this
button to select highlighted menu options.
For more information, see “Using the On
Screen Display (OSD) Menu” on page 12.
7. MENU button
Displays the OSD menu. Press this button
again to exit the menu.
8. Power button
Turns your LCD Display on and off.
9. Cable/ANT connector
If your LCD Display is installed with the TV
Tuner module (available separately), connect
this connector to a Cable TV module or a TV
antenna wall outlet.
10. S/Video Audio jacks
Connect these jacks to the Audio Out jacks
on your VCR or DVD player.
11. YCbCr Audio jacks
Connect these jacks to the Audio Out jacks
on your VCR or DVD player.
12. YCbCr/Component jacks
Connect these jacks to the YCbCr jacks on
your VCR or DVD player.
13. YPbPr Audio jacks
Connect these jacks to the Audio Out jacks
on your VCR or DVD player.
14. VGA Audio jacks
Connect these jacks to the Audio Out jacks
on your VCR or DVD player.
15. DVI Audio jacks
Connect these jacks to the Audio Out jacks
on your VCR or DVD player.
16. RS232 (Optional Function) port
Do not connect devices to this port. This
port should only to be used by qualified
service personnel when they are servicing
your LCD Display.
17. Audio Out jacks
Connect these jacks to the Audio In jacks of
speakers or an amplifier.
18. DVI port
Connect this port to the DVI port on your
computer.
19. VGA port
Connect this port to the VGA port on your
computer.
20. YPbPr/HDTV jacks
Connect these jacks to the YPbPr (HDTV)
jacks on your VCR or DVD player.
21. S-Video connector
Connect this connector to the S-Video Out
connector on your VCR or DVD player.
22. Video connector
Connect this connector to the Video Out
connector on your VCR or DVD player.
23. Power connector
Connect the supplied Power Adapter cable
to this connector.
* For TV inputs only.
LCD Monitor.book Page 5 Tuesday, June 22, 2004 11:15 AM

6
Remote control
24. Mute button
Mutes the volume.
25. Number pad
Selects TV channels.*
26. Jp (Jump) button
Switches to the previous TV channel.*
27. SRS (Surround Sound) button
Enables or disables surround sound.
Make sure that you operate the remote control
within 7 meters (23 feet) of your LCD Display.
24
29
30
31
28
32
27
33
26
34
35
25
36
39
40
41
42
43
45
46
47
37
38
44
* For TV input only.
LCD Monitor.book Page 6 Tuesday, June 22, 2004 11:15 AM

7
28. SAP (Separate Audio Program) button
Switches to the alternative sound track of a
TV program. For example, some TV
programs are broadcast in dual languages,
and this button lets you switch to the
alternative language.*
29. M (Mode) button
Switches between the different
Picture-In-Picture (PIP) modes.
30. Navigation buttons
When the OSD menu is displayed, press
these buttons to scroll through and select
menu options. For more information, see
“Using the On Screen Display (OSD) Menu”
on page 12.
31. Menu button
Displays the OSD menu. Press this button
again to exit the menu.
32. G-Freeze button
Captures the current graphic input image on
the screen.
33. Input buttons
Switch between input sources.
34. F-OFF (Function Off) button
Exits the function settings.
35. Zoom + and Zoom - buttons
Magnify or shrink the main image on the
display.
36. Aspect Ratio buttons
Change the aspect ratio. You can also change
the aspect ratio with the R (Ratio) button
.
37. Function buttons
<PC> Selects the preset color setting for
computer monitor display.
<TV> Selects the preset color setting for TV
programmes.
<Movies> Selects the preset color setting
for movies.
<User1> and <User2> Select user defined
color settings. To change a user defined color
setting, press the <User1> or <User2>
button and adjust the color settings in the
OSD menu. For more information about the
OSD menu, see “Using the On Screen
Display (OSD) Menu” on page 12.
<GFS> Only displays the graphic input image
on the screen.
<VFS> Only displays the video input image
on the screen.
<GOV> Selects a Picture-In-Picture (PIP)
mode where the graphic input image appears
as an inset over the video input image.
<VOG> Selects a Picture-In-Picture (PIP)
mode where the video input image appears
as an inset over the graphic input image.
<PBP> Selects the Picture-By-Picture mode
where the images of graphic and video inputs
are displayed side by side on the screen.
38. Win + and Win - buttons
Magnify or shrink the Picture-In-Picture (PIP)
inset.
39. V-Freeze button
Captures the current video input image on
the screen.
40. Cable button
Switches between American free air cable
(NTSC) and Japanese cable systems.*
41. R (Ratio) button
Changes the aspect ratio. You can also
change the aspect ratio with the Aspect
Ratio buttons .
42. VS (Video Source) button
Switches between video input sources (TV,
Video, S-Video and YCbCr).
43. GS (Graphic Source) button
Switches between graphic input sources
(HDTV, VGA and DVI).
44. X (Cancel) button
Cancels the keyed in TV channel.*
45. + / - (Volume) buttons
Adjust the volume.
46. UP/DOWN (Channel) buttons
Selects TV channels.*
47. Power button
Turns your LCD Display on and off.
* For TV input only.
41
36
LCD Monitor.book Page 7 Tuesday, June 22, 2004 11:15 AM

8
Computer Monitor Connections
You can use a DVI or VGA connection to connect your computer to your LCD Display. Make
sure you turn off your computer and LCD Display before connecting them. Note that you
may need to install a graphics card and audio card on your computer for computer
connections.
DVI
VGA
DVI cable
To DVI port
To Audio
Out jack
Audio cable
(available separately)
Rear panel of
LCD Display
To DVI port
To DVI Audio jacks
VGA cable (available separately)
Rear panel of
LCD Display
Audio cable
(available separately)
To Audio
Out jack
To VGA Audio jacks
To VGA portTo VGA port
LCD Monitor.book Page 8 Tuesday, June 22, 2004 11:15 AM