Crestron CSA-DECOR3-BRKT-163-EC-MTL User manual


CSA-DECOR3-BRKT-163-EC-MTL and
CSA-DECOR3-BRKT-CLUTCH-EC-MTL
Crestron Shades with Brushed Metal
Brackets

Product Manual
Crestron Electronics, Inc.

Original Instructions
The U.S. English version of this document is the original instructions.
All other languages are a translation of the original instructions.
Crestron product development software is licensed to Crestron dealers and Crestron Service Providers (CSPs) under a
limited nonexclusive, nontransferable Software Development Tools License Agreement. Crestron product operating
system software is licensed to Crestron dealers, CSPs, and end-users under a separate End-User License Agreement.
Both of these Agreements can be found on the Crestron website at www.crestron.com/legal/software_license_
agreement.
The product warranty can be found at www.crestron.com/warranty.
The specific patents that cover Crestron products are listed at www.crestron.com/legal/patents.
Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource.
Crestron, the Crestron logo, Cresnet, infiNET EX, QMT, and Quiet Motor Technology are either trademarks or registered
trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered
trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names
or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not
responsible for errors in typography or photography.
©2022 Crestron Electronics, Inc.

Contents
Overview 6
Features 7
CSA-DECOR3-BRKT-163-EC-MTL Features 8
CSA-DECOR3-BRKT-CLUTCH-EC-MTL Features 10
Specifications 11
CSA-DECOR3-BRKT-163-EC-MTL Specifications 12
Product Specifications 12
Dimension Drawings 14
CSA-DECOR3-BRKT-CLUTCH-EC-MTL Specifications 18
Product Specifications 18
Dimension Drawings 19
Installation 23
Motorized Shade Installation 24
Shade Brackets 25
Shade Assembly 28
Motor Wiring 31
Replace a Motor 33
Manual Shade Installation 36
Shade Brackets 37
Shade Assembly 40
Chain Safety Hold 44
Configuration 48
Test and Adjust Shade Limits (Motorized Shades) 49
Test the Shade Travel 49
Adjust the Shade Limits 49
Fabric Telescoping 51
Wireless Communications 52
Join a Wireless Network 52
Leave a Wireless Network 52
Verifying Communications Status 53
Operation 54
Controls and Indicators 55
LEDs 56
Troubleshooting 57
System Diagnostics 57
Error State 58
Product Manual — Doc. 9254A Contents • iii

Resources 59
Crestron Support and Training 59
Programmer and Developer Resources 59
Product Certificates 59
Related Documentation 59
iv • Contents Product Manual — Doc. 9254A

v • Contents Product Manual — Doc. 9254A


Product Manual — Doc. 9254A CSA-DECOR3-BRKT-163-EC-MTL and CSA-DECOR3-BRKT-CLUTCH-EC-MTL • 6
Overview
The CSA-DECOR3-BRKT-163-EC-MTL and CSA-DECOR3-BRKT-CLUTCH-EC-MTL are small
shade mounting systems that expose the entire shade, giving the space a contemporary look.
The system is very compact, enabling installation in tight spaces. The brushed metal end caps
conceal the mounting brackets to provide an exceptionally elegant finish. The easy-to-install and
versatile mounting brackets allow the shade to be mounted inside the window opening or on a
wall or ceiling.
The CSA-DECOR3-BRKT-CLUTCH-EC-MTL is a motorized roller shade and the CSA-DECOR3-
BRKT-CLUTCH-EC-MTL is a manual, clutch-operated shade.
This section provides the following information:
•Features

7 • CSA-DECOR3-BRKT-163-EC-MTL and CSA-DECOR3-BRKT-CLUTCH-EC-MTL Product Manual — Doc. 9254A
Features
This section provides the following information:
•CSA-DECOR3-BRKT-163-EC-MTL Features
•CSA-DECOR3-BRKT-CLUTCH-EC-MTL Features

Product Manual — Doc. 9254A CSA-DECOR3-BRKT-163-EC-MTL and CSA-DECOR3-BRKT-CLUTCH-EC-MTL • 8
CSA-DECOR3-BRKT-163-EC-MTL Features
Key features include:
lModern-looking hardware for exposed roller shade systems
lCompact design, takes up less space on mounting surface
lMetal end caps available in a variety of colors to match any decor
lControlled using an CSM-QMTDC-163-1-EX-BLK-MTL or
CSM-QMTDC-163-1-CN-BLK-MTL Digital QMT® motor
lUniversal bracket for both manual and motorized shading solutions
lDigital Quiet Motor Technology™ provides silent operation and precise positioning
lPatented automatic torque calibration technology detects obstructions to prevent
damage
lProgrammable stop points afford customizable scene presets
lReal-time remote activity monitoring and status feedback
lLocal pushbutton interface for setup and testing
lOnboard multicolor diagnostic LED
lQuick and easy installation
lControl system integration using infiNETEX® wireless or Cresnet® wired communications
lPowered using 24VDC low-voltage, Class 2 wiring
lLimited Lifetime Warranty
Natural and Artificial Daylight Control
Protect fine furnishings and floor coverings from harmful UV rays with intelligent shading
solutions. For added energy efficiency, shades can also be configured to track the location of the
sun to reduce solar-heat gain in the summer and utilize its warmth in the winter. Crestron
shades can also be set to automatically close, preventing glare on a TV and ensuring the ideal
viewing scenario.
Security and Privacy
Shades provide privacy and security. Use semi-translucent shade fabrics to allow natural light
into the space, or blackout shade fabric to completely block views. In the event of a forced entry
into a home, shades integrated with a security system can be set to raise automatically, allowing
an intruder to be easily spotted from the outside.
Quiet Shade Motors
Crestron automated shades feature low-voltage Digital QMT® shade motors for quiet operation.
Crestron shades help manage daylight without audible disruptions to the space.
Brushless Motor Technology
The Crestron Digital QMT shade motor is a brushless design, which translates into exceptional
reliability, smoother operation, and ultra-quiet performance.

9 • CSA-DECOR3-BRKT-163-EC-MTL and CSA-DECOR3-BRKT-CLUTCH-EC-MTL Product Manual — Doc. 9254A
Easy Installation
Crestron shades are easy to install. Brackets are easily mounted, and the shade components are
secured with no special tools required.
Crestron Design Tool Shades (CDTS) Software
The Crestron Design Tool Shades (CDTS) is a web-based tool used for quoting and ordering
Crestron roller shades and drapery tracks. The software may be used to easily create proposals
for customers and place orders directly to Crestron.

Product Manual — Doc. 9254A CSA-DECOR3-BRKT-163-EC-MTL and CSA-DECOR3-BRKT-CLUTCH-EC-MTL • 10
CSA-DECOR3-BRKT-CLUTCH-EC-MTL Features
Key features include:
lIntuitive pull-chain control for precise positioning
lUniversal mounting brackets allow for inside mount installation to the window jamb or
header or outside mount to the window casing, wall, or ceiling
lSmall light gaps
lModern-looking hardware for exposed roller shade systems
lCompact design, takes up less space on mounting surface
lMetal end caps available in a variety of colors to match any decor
lUniversal bracket for both manual and motorized shading solutions
lSmooth and quiet operation
lField-configurable for left or right side pull chain operation
lQuick and easy installation
lLimited Lifetime Warranty
Natural and Artificial Daylight Control
Protect fine furnishings and floor coverings from harmful UV rays with intelligent shading
solutions. For added energy efficiency, shades can also reduce solar-heat gain in the summer and
utilize its warmth in the winter.
Security and Privacy
Shades provide privacy and security. Use semi-translucent shade fabrics to allow natural light
into the space, or blackout shade fabric to completely block views.
Easy Installation
Crestron shades are easy to install. Brackets are easily mounted, and the shade components are
secured with no special tools required.
Crestron Design Tool Shades (CDTS) Software
The Crestron Design Tool Shades (CDTS) is a web-based tool used for quoting and ordering
Crestron roller shades and drapery tracks. The software may be used to easily create proposals
for customers and place orders directly to Crestron.

11 • CSA-DECOR3-BRKT-163-EC-MTL and CSA-DECOR3-BRKT-CLUTCH-EC-MTL Product Manual — Doc. 9254A
Specifications
This section provides the following information:
•CSA-DECOR3-BRKT-163-EC-MTL Specifications
•CSA-DECOR3-BRKT-CLUTCH-EC-MTL Specifications

Product Manual — Doc. 9254A CSA-DECOR3-BRKT-163-EC-MTL and CSA-DECOR3-BRKT-CLUTCH-EC-MTL • 12
CSA-DECOR3-BRKT-163-EC-MTL
Specifications
Product specifications for the CSA-DECOR3-BRKT-163-EC-MTL.
Product Specifications
Shade Control
Motorized Operator: Motor;
Communications: infiNETEX wireless or Cresnet wired;
Torque: 3/4Nm;
Speed: 10 - 30 RPM;
Duty Cycle: 8 minutes on / 40 minutes off at 3/4 Nm;
Communications
Cresnet Wired
(-CNMotors)
Cresnet controlled device
inifiNETEXWireless
(-EXMotors)
RF Transceiver: infiNET EX® 2-way RF, 2.4 GHz ISM Channels 11-26 (2400 to
2483.5 MHz), default channel 15;
IEEE 802.15.4 compliant;
Range (typical): 150ft (46m) indoor (250ft (76m) outdoor) to nearest mesh
network device(s);
Subject to site-specific conditions and individual device capabilities1;
Gateway: Requires a wireless gateway (CEN-GWEXER or CEN-GW1, sold
separately)
Shade Configuration
Shade Width 17.5 to 96 in. (445 to 2,439 mm);
Bracket-to-Bracket (B2B) width including end caps;
Width is dependent upon shade height and fabric selection
Fabric Width 1.5in. (38mm) deduction;
Fabric Width = B2B - 1.5in. (38mm)
Light Gap Drive Side: 0.74in. (18mm)
Idler Side: 0.76in. (19mm)
Tube Diameter Ø1.63in. (42mm)
Roll Up Diameter 2.5 in. (64 mm)
End Caps
Material Metal
Colors Chrome, stainless steel, natural aluminum, black nickel, and old brass
Power Requirements

13 • CSA-DECOR3-BRKT-163-EC-MTL and CSA-DECOR3-BRKT-CLUTCH-EC-MTL Product Manual — Doc. 9254A
24VDC 42.5 W, 1.8A @ 24VDC;
Requires a dedicated power supply (CSA-PWS40 or CSA-PWS10S-HUB-ENET,
sold separately);
Use a home home run connection between the motor and the power supply
Connector
Wire lead and Connector (1) wire lead with 4-pin, 3.8mm terminal block;
For power and wired communication;
-EX Models: 2-wire lead for power (24, G);
-CN Models: 4-wire lead for power (24, G) and communication (Y, Z)
Controls and Indicators
UP, SET, DN (3) Recessed pushbuttons;
For setup and testing
Status (1) Multicolor LED;
For motor status and diagnostics
Environmental
Temperature 32° to 104°F (0° to 40°C)
Humidity 10% to 90% RH (noncondensing)
Dimensions
Bracket Height: 2-7/16in. (62mm)
Width: 1-1/16in. (28mm)
Depth: 3-1/16in. (78mm)
Compliance
Regulatory Model: M202034001
IC, FCC Part 15 Class B Digital Device

Product Manual — Doc. 9254A CSA-DECOR3-BRKT-163-EC-MTL and CSA-DECOR3-BRKT-CLUTCH-EC-MTL • 14
Dimension Drawings
Bracket Dimensions
System Size

15 • CSA-DECOR3-BRKT-163-EC-MTL and CSA-DECOR3-BRKT-CLUTCH-EC-MTL Product Manual — Doc. 9254A
Bracket Mounting Screw Position
Roll Type: Regular Roll (Left) and Reverse Roll (Right)

Product Manual — Doc. 9254A CSA-DECOR3-BRKT-163-EC-MTL and CSA-DECOR3-BRKT-CLUTCH-EC-MTL • 16
Inside Mount

17 • CSA-DECOR3-BRKT-163-EC-MTL and CSA-DECOR3-BRKT-CLUTCH-EC-MTL Product Manual — Doc. 9254A
Outside Mount

Product Manual — Doc. 9254A CSA-DECOR3-BRKT-163-EC-MTL and CSA-DECOR3-BRKT-CLUTCH-EC-MTL • 18
CSA-DECOR3-BRKT-CLUTCH-EC-MTL
Specifications
Product specifications for the CSA-DECOR3-BRKT-CLUTCH-EC-MTL.
Product Specifications
Shade Control
Manual Operator: Metal bead chain with manual clutch;
Gear Ratio: 3:1;
Load : 15.6lb (7.1kg) max;
Pull Force: 5.2lb. (2.4kg) max
Shade Configuration
Shade Width 8 to 96 in. (204 to 2,439 mm);
Bracket-to-Bracket (B2B) width including end caps;
Width is dependent upon shade height and fabric selection
Fabric Width 1.56in. (39mm) deduction;
Fabric Width = B2B - 1.56in. (40mm)
Light Gap Drive Side: 0.79in. (20mm)
Idler Side: 0.77in. (19mm)
Tube Diameter Ø1.63in. (42mm)
Roll Up Diameter 2.5 in. (64 mm)
End Caps
Material Metal
Colors Chrome, stainless steel, natural aluminum, black nickel, and old brass
Environmental
Temperature 32° to 104°F (0° to 40°C)
Humidity 10% to 90% RH (noncondensing)
Dimensions
Bracket Height: 2-7/16in. (62mm)
Width: 1-1/16in. (28mm)
Depth: 3-1/16in. (78mm)

19 • CSA-DECOR3-BRKT-163-EC-MTL and CSA-DECOR3-BRKT-CLUTCH-EC-MTL Product Manual — Doc. 9254A
Dimension Drawings
Bracket Dimensions
System Size

Product Manual — Doc. 9254A CSA-DECOR3-BRKT-163-EC-MTL and CSA-DECOR3-BRKT-CLUTCH-EC-MTL • 20
Bracket Mounting Screw Position
Roll Type: Regular Roll (Left) and Reverse Roll (Right)