CrewPlex CP-REC-900 User manual

For more information visit
www.crewplex.com
QUICK START GUIDE
RECEIVER
CUSTOMER SUPPORT
CrewPlex offers technical support via phone and
email from 07:00 to 19:00 Central Time (UTC 06:00),
Monday through Friday.
+1.833.321.2739 or +1.334.321.1400
[e-mail]
Visit www.crewplex.com for product support
references and helpful documentation.
Additional Documentation
This is a quick start guide. For
additional information, visit our
support website. (Scan this QR code
with your mobile device to navigate
there quickly.)
COPYRIGHT © 2021 CrewPlex, LLC. All rights reserved.
CrewPlex®is a registered trademark of CoachComm, LLC.. Any
and all other trademark references within this document are
property of their respective owners.
Document Reference: D0000621_C
IN THIS BOX
WHAT’SINCLUDEDWITHTHECREWPLEX
DR10RECEIVER?
• Receiver
• ADPT-2.5-3.5: 2.5 mm Male to 3.5 mm Female
Adapter Cable
• USB-C Charging Cable
• Quick Start Guide
• Lanyard
ACCESSORIES
OPTIONALACCESSORIES
• CPBT-RECCHG-10: 10-Bay Drop-In Pack Charger
• CAC-USB5-CHG: 5-Port USB Charger
• CHS-IE-REC: Listen-Only Eartube
• CHS-OE-REC: Over the Ear Listen-Only Earpiece
CP-REC-900

OPERATION
• Lock - To toggle between Lock and Unlock, hold the
Lock button for 4 seconds. A lock icon appears on
the LCD when locked. Lock prevents user access to
change the mode or enter the menu.
• Volume Up and Down - Use the +and -buttons to
control the headset or speaker volume. “VOL” and a
numeric indicator will display the receiver’s current
volume setting on the LCD. You will hear a beep
when volume is changed. You will hear a different,
higher-pitched beep when maximum volume is
reached.
• Mode - Long-press the Mode button to access the
menu.
• Channel - Short-press the Channel button to toggle
between the channels enabled on the recevier.
• Out of Range Tones - The user will hear three quick
tones when the beltpack logs out of the system, and
they will hear two quick tones when it logs in.
Battery
• Battery life: Approx. 10 hours
• Charging LED on recevier will illuminate red while
charging and will turn off when charging complete
(LED is only visible when looking at recevier from an
angle).
SETUP
1. Connect a headset to the receiver or use the
internal speaker.
Note: Most standard 3.5 mm headsets using the included
2.5 mm to 3.5 mm adapter are compatible.
2. Power on. Press and hold the Power button for 2
seconds, until the screen turns on.
3. Access the menu. Press and hold the Mode button
for 4 seconds to enter the menu. Short-press
Mode to scroll through the settings, and then scroll
through setting options using Volume +/-. Press
and hold Mode to save your selections and exit the
menu.
a. Select a group. Select a group number from 00–51.
Receivers must have the same group number as the
CrewPlex system to communicate.
b. Conrmbeltpack’ssecuritycode.Receivers must
have the same 4-digit security code as the CrewPlex
system to communicate.
4. Access the tech menu.* Press and hold the Mode
and Channel buttons for 4 seconds to enter the
tech menu. Short-press Mode to scroll through the
settings, and then scroll through setting options
using Volume +/-. Press and hold Mode to save
your selections and exit the tech menu.
a. Select a mode. Receivers must match the mode of
the CrewPlex DR10 system to communicate.
Note: Once you save the mode, the receiver will power off.
b. Power on. Receiver will now be in the mode chosen
from the tech menu.
5. Select Channel A or B.
*Repeater mode is the default setting. See the CrewPlex
DR10 Manual for more information about modes.
Menu Options
The following settings are adjustable from the recevier
menu.
*Channel B not available in Roam Mode.
The following settings are adjustable from the recevier
menu.
*The modes available in the Crewplex Receiver are
described below:
»Repeater Mode (RP): connects users working beyond
line of sight from one another by locating the Master
beltpack in a prominent central location
»Roam Mode (RM): connects users working beyond line
of sight and extends the range of the MicroCom system
by strategically locating the Master and Submaster
beltpacks.
»Standard Mode (ST): connects users where line of sight
between users is possible.
Menu Setting Default Options
Group 00 00-51
Channel A On On, Off
Channel B* On On, Off
Security Code 0000 Alpha-numeric
Tech Menu Setting Default Options
Mode* RP ST, RP, & RM