CSC HARP MI 510 User manual

www.cscaudio.co.uk
HARP
FEATURES
ŸCompact, high performance
two-way ceiling speaker
High power 30 watt - maximum
SPL 102 dB
Frequency response from
95 Hz –to 15 kHz
Musically accurate with stunning
vocal propagation
Very smooth off-axis response -
usable out to 120° (-6 dB)
Fast, integral hardware
Ÿ
Ÿ
Ÿ
Ÿ
SYSTEM APPLICATIONS
ŸDistributed audio/public
address system
Component for commercial and retail
Hotels, shopping malls
Education and religious establishments
Hospitals and conference rooms
Ÿ
Ÿ
MI 510
GENERAL DESCRIPTIONGENERAL DESCRIPTION
CSC MI 510 is a two-way ceiling speaker with a 5¼” LF with a coaxially
mounted tweeter to provide that extra clarity. This full range ceiling
speaker is designed to provide exceptional sound reinforcement and is
perfect for any public space where one needs clarity. It is easy to install
and can be used to suit every background application. The LF driver
coupled with a high frequency transducer through an optimally designed
crossover gives superb off-axis uniform coverage blending with seamless
intelligibility.
Excellent for most music and voice applications, MI 510 is capable of
delivering incredible sound without any base masking. This product is
equipped with moisture resistant materials for safe use in bathrooms,
kitchens, saunas and even under outdoor eaves. Paint them to match your
décor and they practically disappear, leaving you with nothing but a high
performance sound Installation. Installation of MI 510 is also easy - cut
one hole, feed the wires, and simply drop the speaker in.
Ÿ
Ÿ
Ÿ

HARP
SAFETY
Ÿ
ŸEnsure that there is enough clear space in the false ceiling to house the speaker. Draw a circle and cut a hole and drop in
the ceiling speaker.
Remove the grill from the speaker by gently pushing the mounting poles down until they ease the grill out, position the rear
of the speaker facing into the hole.
Connect speaker to the system while ensuring that all connections are correct. Connect the power to mains and signal to
the audio input.
Turn the fixing points until the ends are located over the ceiling, tighten the screw until the speaker is clamped on to the
ceiling.
Replace the speaker grill.
Turn on the music source and enjoy the amazing sound of the CSC loudspeaker.
SAFETY INSTRUCTIONS
SYSTEM SPECIFICATIONS
Power handling 20 watt
Frequency Response 95 Hz-15 kHz ± 3 dB
Drivers LF: 1 x5¼” (125 mm) LF, Coaxial HF tweeter
Sensitivity (1 Watt/1 meter) 91 dB
Maximum SPL 102 dB
Nominal Impedance Selectable 8 Ohms or 70/100V line
Dispersion 120° from central axis
Protective Grille Powder coated steel mesh
Standard Colours White
Fittings
Tappings 8 ohm, 10/6 watt 100v
Enclosure Aluminum
Mounting hole diameter
Mid highs measured on axis in full space @ 1 watt/1 meter using band limited pink noise. In the en-devour to continuously improve the product with design refinements introduced into
existing products. Any current CSC product may differ in some respect from its published description. However this will always equal or exceed the original design specifications. Every CSC
product is built to the highest standards and tested to ensure that it meets the performance criteria specified.
Ÿ
Ÿ
Ÿ
Ÿ
www.cscaudio.co.uk
Rated Continuous Power AES 20 Watt