manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. CTA
  6. •
  7. Batteries Charger
  8. •
  9. CTA PAD-ICCB User manual

CTA PAD-ICCB User manual

Caution: For proper results, please make sure your device is properly aligned with the inductive charging plate.
Peel the externsl
silicone sleeve from
the internal hard
case.
To open case, apply
gentle pressure to
the small clips
(noted on the
diagram by arrows).
The internal hard
case will open when
all four sides are
unclipped.
Once the iPad is
inside, plug the
lighning charging
cable into the power
socket. Then place
the internal front
(hard) cover on the
top of the case and
gently clip all four
sides shut.
Insert the iPad
into the back
portion of the
hard cover.
Reinstall
the
external
silicone
rubber
sleeve
Power Supply:
Input : AC 100-240V 50/60Hz
Output: DC12V 1.5A
Rating power:18W
Cable Length:1.8M
DC Plug: 5.5*2.1mm male DC Plug
Inductive Charging Case:
Qi Standard: V1.2.4
Input: DC12V 1.3A
Output: DC5V 2.4A(Max.)
Rating Power: 15W
Efficiency: 80-85%(Max.)
Inductive Distance:3-6mm
Input Socket: 5.5*2.1mm female DC socket
Output Plug:Apple Lightning Plug
Charging Time :4-4.5 hours)
Environmental Requirements:
Operating Temperature for iPad: 32℉ to 95℉ / 0℃ to 35℃
Nonoperating Temperature: -4℉ to 113℉ / -20℃ to 45℃
Caution: Please do not place or store the product on or near high-temperature areas like heating devices, open
flame, or in hot cars in extreme heat.
Caution: Please do not place or store the product in or near water, steam, or in any wet, humid, or damp places.
Connect the AC/DC Power Supply to the charging plate as pictured.
1. Locate kickstand at case rear and fold out underneath strap.
2. Display tablet at desired viewing angle.
3. Press kickstand in to return to handheld mode.
TABLETOP OR HANDHELD MODE
CONNECT TABLET CASE TO STAND
IPAD/STAND CHARGING
Take care to assure that
the charging case and back
charging plate are aligned
properly. When done
properly, you’ll see the blue
indicator light up on the
back of the charging plate.
A blue indicator light tells you your
iPad is properly connected to the
inductive charging plate.
Note the power level
displayed on the iPad
screen.

This manual suits for next models

2

Popular Batteries Charger manuals by other brands

Baseus BS-W517 user manual

Baseus

Baseus BS-W517 user manual

Bebob AS2-RL user manual

Bebob

Bebob AS2-RL user manual

Wallbox PULSAR installation guide

Wallbox

Wallbox PULSAR installation guide

WeTech WTC2113 user manual

WeTech

WeTech WTC2113 user manual

AIMS LF Series user manual

AIMS

AIMS LF Series user manual

LVSUN LS-Q4U user manual

LVSUN

LVSUN LS-Q4U user manual

Altronix CommBatt1 installation guide

Altronix

Altronix CommBatt1 installation guide

Telwin ST330 instruction manual

Telwin

Telwin ST330 instruction manual

Reedy Quasar Pro 611 Quick start instructions

Reedy

Reedy Quasar Pro 611 Quick start instructions

Sumato Watchbox SUM001DRK050 quick start guide

Sumato Watchbox

Sumato Watchbox SUM001DRK050 quick start guide

Tripp Lite U280-005-ST quick start guide

Tripp Lite

Tripp Lite U280-005-ST quick start guide

Centech 62813 user manual

Centech

Centech 62813 user manual

pro user MCH8A manual

pro user

pro user MCH8A manual

J. Perkins LIPRO DUAL 6 instruction manual

J. Perkins

J. Perkins LIPRO DUAL 6 instruction manual

IMG STAGE LINE ATS-50PS quick guide

IMG STAGE LINE

IMG STAGE LINE ATS-50PS quick guide

Tripp Lite U280-W01-QC3 quick start guide

Tripp Lite

Tripp Lite U280-W01-QC3 quick start guide

Hi-Tec X4 ADVANCED instruction manual

Hi-Tec

Hi-Tec X4 ADVANCED instruction manual

Mid Ocean Brands MO6391 user manual

Mid Ocean Brands

Mid Ocean Brands MO6391 user manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.