Bebob AS2-RL User manual

bebob factory GmbH – Höglwörtherstr. 350 – D-81379 München – Tel.: [phone]
www.bebob.de
February 2020
AS2-RL Portable simultaneous li-ion battery
charger
User Manual
WE STRONGLY RECOMMEND THAT YOU
READ THIS INSTRUCTION BEFORE USING
YOUR BEBOB AS2-RL CHARGER! PLEASE
KEEP THIS MANUAL FOR FUTURE
REFERENCE
Features
•2 Channel A-Mount (Gold-mount compatible) simultaneous Li-Ion Charger.
•Built-in AC Adapter. 16,5V – 5.0A DC XLR4 Output
•Powerbase Mode.
Charging
•Never leave batteries unattended while charging
•All Channel Status indicator show green when the charger is turned on with no battery
connected
•The Channel Status indicator turns red when a battery is placed on the corresponding channel
and the charging process has begun
•The Channel Status indicator turns back green when the battery is fully charged
•The Channel Status indicator turns Yellow when a battery is placed on the corresponding
channel and the charging process fails for damage or safety reason.
•Cooling fan will be activated during the charging process
AC Adapter
•You can use your AS2-RL either as an AC Adapter or as a charger. Both functions aren´t
possible simultaneously
•The charging functions always has priority
•The AC adapter delivers up to 5,0A under 16,5V

bebob factory GmbH – Höglwörtherstr. 350 – D-81379 München – Tel.: [phone]
www.bebob.de
February 2020
Powerbase
•Plug off the AC Cord from the charger
•Place one or two full batteries on the charger
•Battery Power will be available over the XLR 4 DC Output.
•Maximum Load depends on the batteries
Safety instructions
•Only for professional use! Keep Charger out of reach of children and personnel that has
not been instructed in the use!
•Use only with recommended batteries.
•Keep the charger dry and do not immerse in water.
•Do not cover the charger under use
•A standard three-pin AC plug must be used and earth pole must be connected to the earth line.
•Do not keep in contact with any part of the body while the charger is in working status.
•Do not use or store the charger in unstable, dusty or damp environments.
•Remove the battery from the charger after the charging process is complete.
•Do not attempt to open or repair the charger. Contact your dealer for help if it becomes
defective.
•Handle with care! Do not throw! Do not drop!
Warranty
•The AS2-RL is covered by a 2 years unconditional warranty on all parts.
•For warranty issues or if you have any additional questions, please contact the appropriate
bebob distributor listed at www.bebob.de.

bebob factory GmbH – Höglwörtherstr. 350 – D-81379 München – Tel.: [phone]
www.bebob.de
February 2020
Specifications
Model
AS2-RL
Mount
A-Mount (Gold-mount compatible)
Channel
2 simultaneous
Charging current
16,8V 2.5A
DC Output
16,5V 5.0A
DC Port
XLR4 1 minus 4 plus
AC In
90-264V/47-63Hz 100W
Weight
1,0 Kg
Dimensions (WXHXD)
110 x 231x 141mm
Batteries
bebob
Antonbauer Gold Mount Digital
Antonbauer Gold Mount Dionic XT
Antonbauer Gold Mount CIne
Charging time (bebob VS2/VS4)
depends on the battery capacity
Operating Temp. Range
- 10°C ~ + 35°C