CTC Parker Automation FLH-ADPT2000 User manual

CTC Parker Automation A3-05432-105
Compact Flash Adapter
Introduction
The PowerStation Compact Flash Adapter (model number FLH-ADPT-
2000) is designed to allow you to use your Compact Flash (CF) cards with
a PCMCIA adapteron your PC.Thisdocument explains how toinserta CF
card into the adapter.
Important You must turn off the PowerStation before removing or
inserting the CF card in the PowerStation.
Inserting a Flash Card into the Adapter
The Compact Flash card will slide into the adapter with slight pressure if
the card is correctly aligned. CF cards are designed to be inserted into the
adapter in only one direction, as shown below. Make sure that the card is
correctly seated inthe adapter before you attemptto use the adapterin your
PC.
You can use the Compact Flash Adapter to reformat Compact Flash Cards
or to upgrade Interact or MachineLogic runtime files. For information
about using the adapter to reformat CF Cards, see yourPowerStation User
Guide. For information about using the adapter to upgrade Interact or
MachineLogic runtime files, see the MachineShop Getting Started Guide.

PowerStation Compact Flash Adapter
2
CTC Parker Automation