CTO Lighting LUCID 300 User manual

Installation Guide
Please handle with care and wear gloves at all times during
assembly and installation to avoid damaging components.
[phone] ctolighting.co.uk [email protected].uk
LUCID 300 TABLE

TECHNICAL
PARTS & COMPONENTS
A. 1 x Alabaster shade
B. 1 x Table base
C. 3 x M4x20 countersunk screws
- All nuts and bolts required for the installation will be included in the delivery.
Bulb Holder
240v - 1 x E27
120v - 1 x E26
(bulbs not supplied)
Weight
9kg (19.8lbs)
Wattage
8w - 2700k - LED ONLY
A.
C.
B.

[phone] ctolighting.co.uk [email protected].uk
BEFORE INSTALLATION
- Check that you have all components before starting assembly.
- Assembly must be carried out by a qualified electrician.
- You will need these specific tools for a successful assemble.

1.
2.
Fit the bulb (not supplied) to the lamp-holder.
Attach the shade to the table base.

MAINTENANCE
CerticationCleaning
Dust using a dry lint-free cloth
weekly or as required
[phone] ctolighting.co.uk [email protected].uk
3.
REPLACE BULB
Remove the 3 screws located under the base of the
light.
Gently remove the base from the alabaster shade.
Secure the shade to the base using the 3 screws
supplied.
Repairs
Contact
CTO Lighting
Warranty
Please visit
www.ctolighting.co.uk/
pages/f-a-q
for CTO warranty policy E492309