Cubic World CW2001 User manual

IP CAM USER MANUAL

2 | Page
CONTENT
Chapter 1
Product Introduction……………………………………3
Chapter 2
Product Installation……………………………………..6
Chapter 3
Search Equipment and Login IP Cam..……...………8
Chapter 4
Video Settings and PTZ control operation…….….10
Chapter 5
System Setting And Operation………….…….…….14
Chapter 6
Alarm Setting………………..………………………….19
Chapter 7
Front End Record .….………………………………..23
Chapter 8
Control panel………….………………………………..27
Chapter 9
Diagnostic Tools …...………………………………..37
Chapter 10
Logout……….…………………………………………..38
Chapter 11
How to Access IP Cam Via WAN………...………….39

3 | Page
Chapter 1 Product Introduction
Thank you to use IP Cam. IP Cam is a electronic equipment which is able to
transmit dynamic video stream to all over the world through the network. User
can always monitor the place he wants from anywhere, as long
as he is able to connect to Internet.
IP Cam works base on the TCP/IP standard. A WEB server is integrate inside
which can support Internet Explorer. This feature can help you to accomplish
online management and simply maintenance on your device, such as remote
configuration, remote start-up and firmware upgrade.
The use of P2P agreement is simpler than setting the router. User just
insert the line, input the camera UID in the client software ,then can see
images. It is truly plug and play.
You can use the IPCAM monitoring homes, offices, factories, stores, nurseries
and etc, simply, conveniently and real-time.
You can use the IP Cam monitoring home, office, factories, stores, nurseries
and etc, simply, conveniently and
real-time.
1.1 Hardware/Software requirements:
To use IP Cam through the networks, the minimum hardware requirements of
your computer should be met, Pentium III CPU or better, 1GHz or higher
frequency; At least 256M memory; windows xp, windows 7, 2000 or above
operation system Internet explorer version 6.0 or above, IE 8.0 is strongly
recommended.
1.2 Product features:
Simple installation: If you choose wired networking solution, you need to
prepare power and networks connection. If you want to use WIFI wireless
connection, only power is a must. Scope of applications: Apply to homes,
offices, enterprises, supermarkets, schools and other public places.
Scope of applications: Apply to homes, offices, enterprises, supermarkets,
schools and other public places.

4 | Page
Supporting multiple protocols: Embedded operation system supports the TCP /
IP, SMTP (simple mail protocol), HTTP, UPNP, P2P etc..
Simple configuration: Standard Web browser GUI can help users to control
and manage IP Cam through LAN or Internet.
Video Watching and Video Record: Provide concise GUI for user to watch
real-time video stream from anywhere networking connection. And the video
segments can be recorded on your computer.
Alarm Monitoring: Through external alarm device, the alarm information can be
sent to your e-box or your mobile phone. Especially, user can activate motion
detection function to detect any movement in the selected area. If any illegal
motion happens, alarm will be activated. Simultaneously, the captured images
will be sent to email address specified by user.
Support dynamic DNS: Support Dynamic DNS. Users can access
IP Cam easily through DDNS despite that the device
IP changes frequently.
Simple User Authority Management: Setting USER and PASSWORD
of the system can help user to protect privacy effectively, meanwhile, users
can be authorized with different permission levels to operate IP Cam.
Real-time Monitor through Intelligent Mobile Phone: With the assistance of
professional client software IP Cam Viewer, user can access any online IP
Cam anywhere through intelligent mobile phone, iPhone or
Android-OS(Operation System) based mobile phone and run routine PTZ
operations. User can download IP Cam Viewer software from CD delivered in
package box to your intelligent mobile phone. Please confirm your mobile
phone has iPhone OS orAndroid-OS and choose the correct software version.
1.3 Packing list:
●IP Cam
●Wall Mount Rack
●Power adapter

5 | Page
1.4 Interfaces
Audio: Used to connect headphones, monitor the user's voice
ANT: Used to connect the antenna
SD CARD: used to insert SD CARD.
WPS: Wifi Protected Setup. Light is blue when connect to the router
DC5V: Connect the power adapter.
RESET BUTTON: In the Bottom of device. If user forget the password, just
press this button for more than 5 seconds, then user can restore to factory
settings.
Adjust camera lens: Gently rotate the lens until the image is clear.

6 | Page
Chapter 2 Product Installation
2.1 Hardware installation
1. Install network connection:
Insert one crystal head of twisted pair cable into the cable slot of NIC(Network
Interface Card), which locates on the back of IP Cam. Then, connect the other
crystal head of the cable to the router or switch.
Tips: The length of twisted pair cable should be less than 100 meters, otherwise, the
communication will not be stable. If the connection distance exceeds 100 meters, switch relay
is recommended.
2. Connect the power
Connect IP Cam with power slot through power cable distributed in the
package box.
Cautions: Please use the original power adaptor distributed with the device, otherwise, it may
cause hardware damage.
3. Check the network indicator light
When the device works, normally the green indicator of IP Cam is on
continuously and yellow light flashes.
2.2 Software Installation
Software installation is very simple, you only need to double-click ocx2.exe
and installation can be finished automatically as shown below.
Download OCX.exe from the networking device and install the same
1. When the software is not installed in your PC, meanwhile, the device is
connected to the network, you will be prompted to download and install the
control software as shown below.

7 | Page
You can download the same to any folder you want. After downloading is
completed, double-click OCX.exe and automatic installation will be
implemented. If download OCX.exe from Control Panel in case that installation
is not available.

8 | Page
Chapter 3 Search Equipment and Login IP Cam
3.1: Search IP Cam in LAN
NOTES:
I: Make sure the equipment is properly connected with the network and power.
II: The router must support DHCP (Dynamic Host Configuration Protocol),
because dynamic IP addresses obtaining is one of the factory settings of
device. If the device cannot get the correct ip address, it will use the default ip
address.
III: The device cannot be immediately used when power connection is OK,
system initialization will cost more than 20 seconds.
1: Search Equipment
Access the router and select DHCP. The program will search the network
device and displays the searched IP address, port number.
2: Login Network Device
Input the IP into web browser in its address field directly to access the login
page (for example: http://192.168.XX.XX). As shown
“Login button”is one option to enter the user's computer and“Login Mobile”
is another option for users who use the smartphone. By using “Login Mobile”,
user can watch the video of network device and operate a number of common
features of the network device. User can click “iPad” button to login the IP Cam
console if he wants to watch the online video stream and operate the IP Cam
through iPad. When login user can select the appropriate language version on

9 | Page
top of login page
3: user name and password authentication
The default user name and password are both “admin”. For the first login, enter
your user name (admin), password (admin) and click on the "Login" button to
enter the monitor interface, the user name and password are modifiable. For
the security issue, it is strongly recommended to change the password in
control panel.
After enter user name and password, real-time images is displayed on the
monitor screen.

10 | Page
Chapter 4 Video Settings and PTZ control operations
4.1 Function Description:
4.1.1 General:
Window: Window is defined as video window number shown in the video
region, maximum 100 windows.
Aspect Ratio: Support three kinds monitor size from 4:3, 5:4 and 16:9.
Video Size:Supports four kinds of video sizes: 1280x720, 640x480, 320x240
and 160x120.
Frame rate: User can change the frame rate to limit network traffic and
achieve more fluent image sequence.
IR-LED: User can turn on or turn off the infrared lights.
Mode: Set the video light mode, and remove the jitter impact of the image as
per the electricity frequency. The following three mode are used: 50HZ/60HZ

11 | Page
/outdoor model. Generally, indoor mode use 50Hz or 60Hz, outdoor mode
should be set as per the real camera working environment.
Flip: the video upside down.
Mirror:Reverse the video.
Mute:Close the sound of the device.
Video Panel:Shortcut function keys will be displayed on monitor screen,
which can take photos, video and realize the function of voice intercom .
Sound Alarm: If selected, when the alarm device is Trigger computer sound
alarm. If not, computer is mute.
Connection: Connect the selected device address, and display images in the
current window
Disconnect: Disconnect the selected video connection, and stop displaying
video. If video recording is ongoing, the operation will stop simultaneously.
Snapshot: Photograph the selected device and save the photographed
image.
View Snapshot: Open image folder to view the pictures. Start/Stop the video
record: Start or stop the video record of the selected device.
Start Record: Start or stop the video record of all the connected devices.
View Record:Open video folder and view the saved video segment.
Start Talk: Used for users who want to talk thought internet.
PTZ Speed: PAN/Tilt/Zoom operation speed
Full Screen: Monitor display in full screen.

12 | Page
4.1.2 Advanced:
Connect All: Used to connect all the IP Cams.
Disconnect All: Used to disconnect all the IP Cams.
All Start Record: Used to record all the added IP Cams.
All Stop Record: Used to disconnect all the added IP Cams.
Video Effect: It is to set the compression ratio of the image. The option of Best
Image Performance can produce the best image quality. However, it will
produce big networks traffic and the saved file need more space storage size.
Comparatively, the option of the Most Fluent image will produce less networks
traffic and needs less space size to save the video. Inevitably, it will impact the
impact the image quality. The performances of the other three options are
between the two mentioned above. It is commented to use Most
Fluent Mode in WAN(Wide Area Network), so that user can achieve fluent
image sequences. And it is commented to use Best Image in LAN(Local Area
network) to achieve best image performance.

13 | Page
Meanwhile, user can choose other modes as per his/her actual requirements.
Brightness: Used to set the brightness of the image.
Contrast: Used to set the contrast of the image.
Hue: used to adjust the hue of the image. Saturation: used to adjust the
saturation of the image.
Default Color:Set the default color of the image, recommend use default
parameters.

14 | Page
Chapter 5 System Setting And Operation
Network device page setup options are in the far left, when clicking the left
arrow, the hidden settings page will be expanded. Click the left arrow, set the
options as follows
Functional description of the set-up options:
5.1 Live Video:
For viewing video, in any case you can click on this button to enter the video
mode to watch.
5.2 IPAD:
For viewing video from iPad or Tablet PC

15 | Page
5.3 Network Connection:
Set the parameters associated with the network connection.
5.3.1 Network Settings:
The default Port value is 81. If you want to visit the multiple IP Cam in a same
local area network through WAN, in order to distinguish different devices, each
IP Cam needs a different port, such as 81,82, etc. and so on
To obtain IP address automatically (DHCP):
Select DHCP, device will automatically obtain the IP, which is not fixed (this
feature requires the router to support DHCP protocol and this feature should
be activated).
Using the specified IP address (static IP):
To specify the equipment IP, it is required to manually fill in IP address. Fill in
relevant information by the Depositary and click on the “Save” button. This
function will be activated after restart. Gateway settings generally use the
default settings, and the device uses the router's IP address as the gateway.
5.3.2 Wireless Connection:
WPS function is supported in IP Cam. User can make the connection between
IP cam and wireless router with WPS function by simply pressing the WPS
button on the IP cam, without the process of setting passwords. If user presses
the WPS button on the back of the device, the WPS verification web page will
displayed. It will give user the notice of encryption success after WPS
verification is finished.

16 | Page
The device supports WiFi wireless capabilities. After setting up WiFi
parameters, such as Password, Authentication parameter, please select
"Save" and restart IP Cam. Then, the user will be able to access the network
through a wireless network of device. (Wireless settings must be in
strict accordance with the password authentication method parameters of the
wireless router, otherwise, it cannot access the wireless connection.
If user want to use the wireless feature, first click on “Enable” and click
“Searching Wifi” to search for your area wireless router; secondly, choose the
router name of user itself and fill in the wireless router password and the type
of IP address. Generally, user can connect to the router now. Unplug the
network cable at this moment, you should find the IP Cam. Network device
supports WEP and WPA2 encryption. As the diversity of the router, if one
encryption way is not connected. User should choose another encryption
method.

17 | Page
5.3.3 Dynamic DNS:
The device supports third-party's domain name resolution, dynamic DNS of
www.3322.org and www.dyndns.org. Also the equipment comes with a
globally unique domain name.
5.3.4 UPnP:
UPnP is to realize automatic port mapping function. If IP Cam is connect to
router. In order to access to IP Cam through WAN, it is required to open a
specified port of the router to the device. (This feature requires router support,
and this feature should be open. Without this feature, you need to manually set
up port mapping in the router). If UPnP is enabled successfully, it will show
“Success” in status.

18 | Page
5.3.5 Reversed Connect:
Usually, IP Cam is set as server, and monitor software plays the role of client.
But in case that IP Cam locates in the network which doesn’t support server
settings. Reverse connect function can help the user set the IP Cam as client
and set the monitor software as server, so that user can access the IP Cam
through monitor software.
5.3.6 MSN:
User can add MSN friends accounts through which can access the IP Cam.

19 | Page
Chapter 6 Alarm Setting
Alarm setting is use to set the alarm function of IP Cam. When external alarm
signal or motion detection is triggered, alarm will come. If the user has set up
e-mail function, fill in the corresponding mailbox address to receive mail. An
alarm mail will be sent to the user. Motion detection is for the user who want to
deploy the detected region when something break into detected region, IP
Cam will sound warning signals and send photos to the e-mail set by user.

20 | Page
When User want to enable the motion detective, hold down left mouse button
on the image, drag the green part is the selected area. When something break
into the green area, IP Cam will alarm and trigger according to user’s setting.
User can set the motion-detection duration through the time slot. Time shot
show the week (Sunday to Saturday) and time (00:00 to 23:00). Hold down left
mouse button and selected the time of motion-detection triggered and mark in
red. In the selected detecting time, if any motion is detected, alarm will be
trigger. Hold down “Ctrl” Key & left mouse button to unselect the time and the
mark will be blanked
6.1 Motion Detection:
Enable motion detection:Used to open the motion detection
E-mail alarm:Used to send photos to the specified mailbox when there is an
alarm.
FTP alarm:Used to send photos to FTP specified server when there is an
alarm.
HTTP alarm:Used to send messages to HTTP site when there is an alarm.
Sensitivity:For motion detection sensitivity, the smaller value is lower
sensitivity and the larger value is higher sensitivity. Suggest use 20 as default
value.
Alarm Duration: User can choose the time of the alarm duration.