Aztech WIPC402 Instruction Manual

1
AZTECH
Aztech WIPC402 IP Camera
Frequently Asked Questions (FAQs)
ow to connect WIPC402 to Wireless? ………………………….. 2
ow to save snaphots and video clips on the SD Card and FTP
Server for Alarm Notification? ……………………………………….. 7
ow to Configure Email Settings for Alarm Notification? …. 9
ow to Configure Schedule for Alarm Notification? ……… 10
ow to Configure using MAC Operating System? ……… 12

2
AZTECH
ow to connect WIPC402 to Wireless?
1. Open the Resource CD Provided in the package, and run the IPC402 Utility (V2.0.1.8).
a) Click the Search Button
b) Select the IPC402 Camera
c) Click Browse

3
AZTECH
2. On the IPC402 eb UI, enter the Username and Password. (Default value is admin)
3. Click Sign in for Browser
You will be asked to install ActiveX Plug-ins, just click allow to enable it.

4
AZTECH
4. On the eb User Interface, Selec t on the Network Menu on top, iFi Sub Menu at the right
column.
Click on ‘Enable’ ireless. Then Choose the Apply Button.
5. Search for the existing SSID / Home Network where the camera will connect.

5
AZTECH
Click Join.
6. Enter the key/ password. Then click Apply.

6
AZTECH
7. You may now disconnect the LAN Cable from the IP Camera.
8. Also, unplug and Plug-in the Power Adapter for the device to reboot.
9. ait for about two (2) minutes until the right LED Indicator in front of the camera turns to
Color Blue to indicate that iFi Connection is successful.

7
AZTECH
ow to save snaphots and video clips
on the SD Card and FTP Server for
Alarm Notification?
1. On the IPC402 eb User Interface, select on the Alarm Menu, Motion Detection Sub
Menu (found at the right column).
2. Ensure that the motion detection is enabled. You may select on the four (4) windows to
locate the motion detected and its sensitivity. Click Apply after finished.

8
AZTECH
3. Go to to Alarm sub menu (found at the right column) and select / click
•Save Picture on the SD Card
•Save Video on the SD Card
•Save Video on the FTP Server
*Please ensure that SD Card is inserted on the device before turning the Power ON.
* To insert the SD Card, its metal contacts must be facing on top.
* To save on the TP Server, SD Card must be inserted for back up security.
For the FTP Server parameters, please see sample setting below.
Click Apply after finished.
*On the TP older, it will create two (2) sub folders, Snapshot and Record older.

9
AZTECH
ow to Configure Email Settings for
Alarm Notification?
1. On the IPC402 eb User Interface, select on the Alarm Menu, and Alarm Sub Menu
(found at the right column). Click on the Email Alarm box. You may also check on the
Send with Picture Option.
2. On the Email Setting, Please find below sample screenshot.
Click Apply Button once finished.

10
AZTECH
ow to Configure Schedule for Alarm
Notification?
1. On the IPC402 eb User Interface, select on the Alarm Menu, and Schedule Sub
Menu (found at the right column). You can set it in three (3) ways:
a) Using the eek Mode – in this setting you may enable alarm schedule on a daily
basis from Sunday to Monday (top to bottom found at the leftmost corner). You may
also set up to three (3) schedules per day (from left to right). Ensure that the start
time is lower than the end time. Click Apply once finished.
b) Using the ork Mode – in this setting you may enable alarm schedule on either a
workday or a weekend (top to bottom found at the leftmost corner). You may also
set up to three (3) schedules per day (from left to right). Ensure that the start time is
lower than the end time. Click Apply once finished.

11
AZTECH
c) All times – in this setting you may enable alarm schedule at all times.
Click Apply once finished.

12
AZTECH
ow to Configure using MAC OS?
1. Download and install Device Finder Software at Aztech Support ebsite and
Follow procedure below.
2. Launch the Application.
3. Search for the camera in the device list and click Login.

13
AZTECH
4. It will now take you to the browser to sign-in.
Input the username / password that is admin / admin by default.
5. After authentication you may now view the camera.

14
AZTECH
Take note that to view using other browsers (e.g. Safari on MAC), you must enable below,
Please check the User Manual for more details.