D-Link WIRELESS G DCS-950G User manual

Check Your Package Contents
Thesearetheitemsincludedwithyourpurchase:
If any of the below items are missing, please contact your reseller.
BeforeYouBegin
Youmusthaveatleastthefollowing:
• Windows98/Me/2000/XP
• ACD-ROMdrive
• AnavailableEthernetconnection
DCS-950G
This product can be set up
using Internet Explorer 6.x
or above
SECURICAM Network
802.11g Wireless
Audio Internet Camera
©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of
their respective holders. Software and specifications subject to change without notice. DCS-950G.11172004
DCS-950G Wireless Internet Camera
5V 2.5A AC Power Adapter
CAT5 Ethernet Cable
CD-ROM with Manual and Installation Wizard
Using a power supply
with a different voltage
rating will damage this
productandvoidthewarranty.
Mounting Bracket and Stand
Antenna

2
Hardware Installation
System Requirements
• InternetExplorer6.xorabove
• CPU:800MHzorabove
• MemorySize:128MB (256MBrecommended)
• VGAcardresolution:800x600orabove
Note: If using multiple cameras for viewing/recording, the minimum requirements
are a 2GHz or above CPU with 512MB memory and a 32MB video card.
Connect the Ethernet Cable
ConnectanEthernetcabletotheEthernetconnectorlocated
on the Internet Camera’s back panel and attach it to the
network.
Attach the External Power Supply
Attach the external power supply to the DC power input
connectorlocated on theInternet Camera’s backpanel
(labeled DC 5V 2.5A) and connect it to anAC power outlet.
The LAN LED will light green when there is a good connection to the LAN. The LED will
beginto flashindicating the camerais receivingor sending data.
Power source is confirmed when
the LED Power Indicator on the
InternetCamerais illuminated.
If you connect this camera directly to a PC,
theDCS-950GhasanMDI/Xportthatwillallow
youtouseeitherastraightthrough(included)orcross-
overcable.

3
Installing the Installation Wizard
InserttheDCS-950G CDintothe
CD-ROMdrive.
Click on Install Software.
Click on Installation Wizard.
Click Next.

4
Installing the Installation Wizard
(continued)
ClickYes.
Click Next.
Click Next.

5
Click Finish.
Installing the Installation Wizard
(continued)
Click OK.
Click Next.

6
Installing the Installation Wizard
(continued)
Click I Agree.
Click Next.
Click Install.

7
Installing the Installation Wizard
(continued)
Click Next.
Click Finish.

8
Configuring Your Camera with the
Setup Wizard
Click the Wizard
buttonto begin.
Your camera’s IPAddress will be
displayedhere.
To run the Setup Wizard, click on
Start->Programs->DCS-950 Series
Setup Wizard.
By default, the Admin ID and
Passwordare“admin”(lowercase).
Enter this in both fields. To change
the Admin Password, select the
Change box and enter a New
Password.
TheIP Address,Subnet Mask, and
Gateway of your camera must
correspondwithyournetworksettings
for you to access the camera. If you
are unsure of what these settings
should be, please check with your
networkadministrator.
Click Next.
Click Next.

9
Configuring Your Camera with the
Setup Wizard (continued)
Ifyouneedtomakeanychanges,click
Back tomodifyyour camerasettings.
Otherwise, click Restart to save and
apply your settings. This may take a
fewminutes.
The Connection Mode depends on
howyourcameraisconnectedtoyour
network.Click Infrastructure for use
with a router or Adhoc for a peer-to-
peer connection. The Network
Name, Wireless Channel, Security
Mode and Authentication MUST
correspondwithyourwirelessnetwork
settings for the camera to work.
Click Next.
Click Next.
ClickRestart.
Enter the Encryption Mode, Key
Format,andEncryptionKeysfor you
wireless network. Click Next.

10
Configuring Your Camera with the
Setup Wizard (continued)
Click Link.
WaituntiltheLinkLEDonthecamera
begins to flash. Click Link to launch
your Web browser and view your
images.