CUE uniCUE-7-B User manual

User Manual
Touch Panel Controllers
10.12.2012

2 Contents
3 Introduction
3 Overview
3 Models And Accessories
3 Features
3 Programming
4 Application Diagram
5 Box Contents
6 Specifications
7 Physical Description
7 Front Panel
8 Rear Panel
9 Dimensions
10 Mounting
10 Back Box
13 Adjusting Unit On The Wall
14 Placing Unit Into The Back Box
15 Taking Unit Out
16 Cleaning
17 Connecting
17 Rear Panel Overview
18 CUEnet (LAN)
20 PWR IN
20 OUT 5 V
21 SERIAL
22 IR/SERIAL
23 GENERAL I/O
24 RELAY
24 AUDIO LINE
25 CUEwire Device Connection
26 Download User Application
26 Overview
26 Using Cue Visual Composer
27 Using Admin Web
28 IR Capture
29 Factory Default and System Default
30 On Screen Display
30 Access On Screen Display
30 Startup Menu
30 Settings
30 Status
31 IP Settings
31 Date/Time
32 Applications
32 Calibration
32 Exit
33 Admin Web
33 Access Admin Web
33 Login
33 Configuration
35 Date and Time
36 Applications
36 File Storage
37 E-mail
37 Settings
38 System
38 Password
39 Backup
40 Reset
40 License
41 Software and Firmware License
42 Notes
Contents
UM045_01_Touch_Panel_Controllers
10.12.2012
© CUE, a.s., Praha, Czech Republic 1990 - 2011
All rights reserved. Specifications are subject to change without prior notice.

3
Touch Panel Controllers / Introduction
© CUE, a.s. All Rights Reserved.
Introduction
Overview
The uniCUE touch panel controllers are innovative new kind of product combining touch panel and controller
in one box. Everything in the room can be controlled with its integrated control ports. These devices offer
cost effective one-box solution for meeting and conference rooms, boardrooms, classrooms, private houses
etc. From design point of view these products are fully compatible with cuenium2 touch panel product line.
The front case is machined from a single billet of aluminium greatly improving the rigidity of the device.
Active matrix touch screen displays 7” (uniCUE-7-B) or 12” (uniCUE-12-B) diagonal offer resolution
800 x 480 or 1280 x 800 pixels and produce stunning 32-bit (True Color) images. Built-in light sensor
automatically adjusts display backlight according ambient light level and motion sensor can resume touch
panel from backlight saver mode. The IR sensor located on a front panel can receive IR signal from CUE
wireless IR control panels without the need to use any external IR receiver. In addition uniCUEs are equipped
with internal IR sensor allowing to capture IR codes.
Wired Ethernet connection provides easy network integration with other CUE units and it allows bi-directional
IP control of any manufacturer IP enabled products. The uniCUEs are equipped with following control ports:
two bi-directional serial ports RS-232/422/485, four IR /serial outputs (IR signal up to 1.2 MHz), four general
I/Os configurable as analog input or digital open collector output and two double-throw contacts relays 24 V.
Both uniCUEs provide video preview right on the touch panel. Streaming or downloaded video can be viewed
at any location on the display or in full screen mode. Integrated front panel speakers provide clear audio for
streaming media and for internal graphic object feedbacks, voice prompts and other personalized sounds.
Built-in microphone allows to use uniCUE as a voice memos recording device. Audio line input and line
output located on a rear panel offers the same functionality as integrated microphone and speakers.
Application is created in Cue Visual Composer software where touch panels and controllers are programmed
in the same way, which makes it possible to use touch panels as fully functional control units. One universal
programming language XPL2 allows to program graphical objects, touch panel layouts, device drivers and
other parts of control application. The uniCUEs also offer a web server for setup and configuration provided
through a standard web browser.
Models And Accessories
Model Product Code Description Note
uniCUE-7-B CS0388 Built-in touch panel controller 7”
uniCUE-12-B CS0404 Built-in touch panel controller 12”
Back Box CS0409 Back box for built-in models The same for 7” and 12” models
Features
▪Wired built-in touch panel controllers
▪7” or 12” active matrix touch screen display
▪Resolution 800 x 480 pixels for 7”, 1280 x 800 pixels for 12”
▪Display colors 32-bit (True Color)
▪Wired Ethernet communication
▪Built-in microphone and speakers, light and motion sensors
▪Built-in IR transmitter and receiver, IR capture sensor
▪Control ports
▪Bi-directional serial RS-232/422/485
▪IR /serial outputs (IR up to 1.2 MHz)
▪General I/Os
▪Relays NO-C-NC 24 V
▪Aluminium front panel
Programming
Both touch panel controllers have to be programmed using Cue Visual Composer. These models are not
compatible with Cue System Director.

4
Touch Panel Controllers / Application Diagram
© CUE, a.s. All Rights Reserved.
Application Diagram
Devices can be controlled using IP, serial channels, IR channels, general I/Os and relays. All CUE keypads,
keyboards and interfaces can be connected using RS-485 serial ports. In addition uniCUE is fully compatible
with other CUEunits such as touch panels and controllers connected via Ethernet.
Following figure describes uniCUE application example.
M
otorized
S
creen
P
laSMa
d
iSPlay
relay
cUe-8
d
raPeS
aV S
ySteM
W
all
S
WitcheS
Uni
cUe-7-B /
Uni
cUe-12-B
n
etWork
P
rojector
h
eating
/ V
entilation
g
eneral
i/o
S
S
erial
and
ir
P
oWer
r
elayS
l
ightS
l
ightS

5
Touch Panel Controllers / Box Contents
© CUE, a.s. All Rights Reserved.
Box Contents
uniCUE-7-B uniCUE-12-B
Touch panel controller uniCUE-7-B 1
Touch panel controller uniCUE-12-B 1
Power supply 30 W 1 1
Power cable 1 1
Ethernet cable straight-through 1 1
IR Adapter /i 2 2
Connector set 1 1
CE declaration 1 1
RoHS declaration 1 1
Data Sheet 1 1
Cue System Connector Wiring 1 1

6
Touch Panel Controllers / Specifications
© CUE, a.s. All Rights Reserved.
Specications
Product Name uniCUE-7-B uniCUE-12-B
Product Code CS0388 CS0404
Touch-screen display TFT color active matrix LCD with LED backlit
Size 7” / 177.8 mm diagonal, wide screen
Resolution 800 x 480 pixels (WVGA)
Display colors 32-bit (True Color)
Transparency 8-bit Alpha blending
White luminance 400 cd/m2
Contrast ratio 1000 : 1
Pixel pitch 0.19 mm
Viewing angle ±80° horizontal, ±80° vertical
Resistive membrane touch overlay
TFT color active matrix LCD with LED backlit
Size 12.1” / 307.3 mm diagonal, wide screen
Resolution 1280 x 800 pixels (WVGA)
Display colors 32-bit (True Color)
Transparency 8-bit Alpha blending
White luminance 400 cd/m2
Contrast ratio 1000 : 1
Pixel pitch 0.204 mm
Viewing angle ±80° horizontal, ±80° vertical
Resistive membrane touch overlay
Built-in sensors Light sensor for automatic backlight dimming
Motion sensor for automatic backlight switch on
Buttons Multifunctional for power and programmed functions
Reset
Set factory default
Memory 256 MB RAM
microSD Card min. 4 GB (upgradable)
Control ports 2x Bi-directional serial RS-232/422/485, 2x 5-pin connector
4x IR /serial output (IR up to 1.2 MHz), 4x 2-pin connector
4x General I/O can be congured as
• Analog input 0 – 5 V
• Digital open collector output max. 80 mA, 5-pin connector with common ground
2x Relay NO-C-NC, 24 V, max. 0.5 A, 6-pin connector
Software XPL2 runtime for application created in Cue Visual Composer
Admin Web for setup
Video Streaming video preview
Audio Built-in microphone
Built-in speakers
Line in, 3-pin connector
Line out, 3-pin connector
Wired communication 10/100 BaseT LAN, RJ-45 connector
Infra-red IR receiver for IR link
IR transmitter for direct control
IR capture sensor
Power supply 24 VDC (+/-20%), 15 W, 2-pin connector
Physical Aluminium front panel
Back box available
Dimensions 198 x 147 x 60 mm
7.8” x 5.8” x 2.4”
320 x 225 x 61 mm
12.6” x 8.9” x 2.4”
Weight 1.1 kg / 0.5 lb 1.4 kg / 0.6 lb
Environment conditions Operating temperature 10° to 40° C
Storage temperature 0° to 60° C
Relative humidity 10% to 90% non-condensing

7
Touch Panel Controllers / Physical Description
© CUE, a.s. All Rights Reserved.
Physical Description
Front Panel
Light sensor
IR receiverMotion sensor
Aluminium front panel
Touch-screen display
Speakers
Multifunctional button
Microphone
Reset button
Microphone
The microphone is prepared for future use. The functionality depends on a firmware version.
Motion sensor
The Motion sensor resumes touch panel from Backlight Saver mode. This functionality can be enabled /
disabled using On Screen Display or Admin Web.
IR Receiver
The built-in IR sensor carries the same functionality as irCUE Receiver or irCUE Receiver 485. This means that
touch panel can receive IR signal from CUE wireless IR control panels without the need to use any external IR
receiver.
Light Sensor
The Light Sensor automatically adjusts display backlight according ambient light level. This function has to be
enabled using On Screen Display or Admin Web.
Touch-screen display
Touch-screen display with active matrix color LCD and resistive membrane touch overlay.
Speakers
The built-in stereo speakers allows to play sounds stored in the touch panels.
Multifunctional button
The multifunctional button shows On Screen Display used for touch panel setting. For more details see
chapter onScreen diSPlay.
Reset Button
When pressed the reset of the unit is performed followed by operating system boot. A thin screwdriver is
needed for press of this button.

8
Touch Panel Controllers / Physical Description
© CUE, a.s. All Rights Reserved.
Ethernet
Power Supply 24 VDC
2x Serial port RS-232/422/485
4x IR/Serial port
4x General I/O
2x Relay 24 V, NO-C-NC
Power output 5 VDC
Audio line output
Audio line input
IR Capture Sensor, IR Transmitter
Rear Panel
This chapter describes rear panel equipped with all connectors. For more details about connection see
chapter Connecting.
IR Capture Sensor
The built-in IR sensor allows to capture IR codes directly by touch panel. For more details see chapter IR
Capture.
IR Transmitter
IR Transmitter allows to transmit IR codes directly from touch panel. Devices can be controlled directly
without controller.
Audio
Two 3-pin connectors provide unbalanced audio line input and output.
Power Output 5 VDC
This 2-pin provides 5 VDC output.
Factory Default Button
When pressed the factory default function is performed. For factory default values see chapter Factory Default
and System Default. A thin screwdriver is needed for press of this button.
Ethernet
The 10/100 BaseT LAN is a standard network connection using RJ-45 connector. For more details see chapter
Connection.
Power Supply 24 VDC
Powering of uniCUE is provided by 24 VDC. Use only delivered power supply.
Control Ports
Rear panel of uniCUE is equipped with following control ports
▪2x Serial port ES-232/422/485
▪4x IR/Serial port
▪4x General I/O
▪2x Relay 24 V, NO-C-NC contacts

9
Touch Panel Controllers / Physical Description
© CUE, a.s. All Rights Reserved.
Dimensions
uniCUE-7-B
144,9
198
10 6
5
4
12 9 11 8
?
2
3
1
7
59,4
16,5
57
Ra 3,2
)(
Poz Číslo dílu/Název dílu Popis Materiál Počet
1 GM0361.1 plexi průhled AK1812 - plexi kouřové 1
2
M2.5 x 6 DIN 85A - BN 1362 2
3
šroub - M2 x 5 ISO 7045 - M2 x 5 2
4
sestavaDPS+konektory-7 sestavaDPS 7" Sestava_FUD 1
5
GS0035 rám sestavený+zámky Sestava_FUD 1
6
GS0028.1 sestava čelního panelu 7" Sestava_FUD 1
7
ISO 7046-1 - M3 x 12 ISO 7046-1 - M3 x 12 4
8
ISO 7046-1 - M3 x 6 ISO 7046-1 - M3 x 6 2
9
šroub - M3 x 4 ISO 7045 - M3 x 4 3
10 GM0360.1 kryt zadní-Díl2 11373 1
11 GS0036.1 kryt zadní spodní sestavený Sestava_FUD 1
12 GM0336.3 podložka chladící AlMg3 2
13 4
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED
IN THIS DRAWING IS THE SOLE
PROPERTY OF FAKTUM DESIGN
ANY REPRODUCTION IN PART OR
AS A WHOLE WITHOUT THE WRITTEN
PERMISSION OF FAKTUM DESIGN
IS PROHIBITED.
WEIGHT.: 1.080 kg
LAST CHANGE: 10.1.2011
c
b
FAKTUM DESIGN
ČERNOVICKÁ 2B
617 00 BRNO
TEL.: [phone]
WWW.FAKTUM.CZ
a
NAME: DATE: SPECIFICATION: INDEX:
CAD
A3
NAME: John CREATED: 9.5.2010
GS0037.1
DO NOT SCALE DRAWING
TITLE:
DRW. NO.:
SCALE: 1:2
SHEET 1 OF 1
MAT.: Sestava_FUD
DRAW
TOLERANCES:
ISO 2768-mK
DEBUR AND BREAK
SHARP EDGES
SURF.: 0.309 m
2
SEMI.: --
REVISION:
panel sestavený
320
224,9
6,5
17,5
60,4
58
17,5
5
4
362
1
Ra 3,2
)(
Poz Číslo dílu/Název dílu Popis Materiál Počet
1 GS0051.1 sestava čelního panelu 12" Sestava_FUD 1
2
GS0061.1 Sestava_FUD 1
3
GS0038.1 podomítková krabice Sestava_FUD 1
4
sestavaDPS+konektory-12 sestavaDPS 12" Sestava_FUD 1
5
GM0512.1 průhled Ak1812-kouřové plexi 1
6
GS0062.1 kryt plechový Sestava_FUD 1
Poz Číslo dílu/Název dílu Popis Materiál Počet
1 GS0051.1 sestava čelního panelu 12" Sestava_FUD 1
1.1 GM0503.1 1.4301 1
1.2 GM0353 5/7-silikonová hadička Silikon 1
1.3 touch-12 H5121A 11373 1
1.4 12-LCD 12"LCD 11373 1
1.5 repro repro ABS PC 2
1.6 GM0454.2 podložka krytu kamery ABS/PC 1
1.7 GM0457.1 kryt čidla pohybu Ak1812-kouřové plexi 1
1.8 GM0342.3 kryt LED Px030/S-plexi bílé 1
1.9 M2.5 x 12 DIN 85A - BN 1362 2
1.10 GM0506.1 podložka Plexi černé 1
1.11 šroub - M2 x 6 ISO 7045 - M2 x 6 4
1.12 1
1.13 GP0068 DPS+IR+MOTION+CAMERA-12" Sestava_FUD 1
1.13.1 1
1.13.2 1
1.13.3 1
1.14 2
1.15 4
2
GS0061.1 Sestava_FUD 1
2.1 spring alcomex D640 12,5-8,1 /6,5N 1.1200 - pružinová ocel 2
2.2 GM0509.1 hák nový 11373 2
2.3 S- M3 x 8 i ISO 47628 4
2.4 1
2.5 2
2.6 8
3
GS0038.1 podomítková krabice Sestava_FUD 1
3.1 GS0034.1 krabice se svorníky Sestava_FUD 1
3.1.1 krabice montážní krabice montážní 11373 1
3.1.2 PEM FH-M3x6 PEM FH-M3x6 4
3.2 GS0032.1 úchytka zámku levá Sestava_FUD 1
3.2.1 zámek1 zámek1 1.4301 1
3.2.2 1
3.2.3 čep zámku čep zámku ABS 1
3.3 ISO 7040-M3 ISO 7040-M3 4
3.4 GS0033.1 úchytka zámku pravá Sestava_FUD 1
3.4.1 GM0365.1 1.4301 1
3.4.2 1
3.4.3 1
3.5 GS0039.1 Sestava_FUD 2
3.5.1 US1 úchyt 11373 1
3.5.2 M3 x 30 ISO 7045 1
3.5.3 US2 jezdec 1.4301 1
3.5.4 matice M3 ISO - 4032 2
4
sestavaDPS+konektory-12 sestavaDPS 12" Sestava_FUD 1
4.1 sestava DPS-controlCue sestava DPS-controlCue 11373 1
4.2 miniUSB 11373 1
4.3 gp0083.2 dps konektory 11373 1
4.4 GM0336.3 podložka chladící AlMg3 4
4.5 M2.5 x 12 DIN 85A - BN 1362 4
4.6 gp0065_1 LCD kontroler12 11373 1
4.7 1
5
GM0512.1 průhled Ak1812-kouřové plexi 1
6
GS0062.1 kryt plechový Sestava_FUD 1
6.1 GM0511.1 kryt konektorů 11373 1
6.2 GS0036.1 kryt zadní spodní sestavený Sestava_FUD 1
6.2.1 kryt zadní Díl1 kryt zadní-Díl1 11373 1
6.2.2 4
6.2.3 sloupek M3x15 průchozí sloupek M3x15 průchozí 4
6.3 šroub - M3 x 4 ISO 7045 - M3 x 4 8
6.4 ISO 7046-1 - M3 x 6 ISO 7046-1 - M3 x 6 2
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED
IN THIS DRAWING IS THE SOLE
PROPERTY OF FAKTUM DESIGN
ANY REPRODUCTION IN PART OR
AS A WHOLE WITHOUT THE WRITTEN
PERMISSION OF FAKTUM DESIGN
IS PROHIBITED.
WEIGHT.: 6.158 kg
LAST CHANGE: 10.1.2011
c
b
FAKTUM DESIGN
ČERNOVICKÁ 2B
617 00 BRNO
TEL.: [phone]
WWW.FAKTUM.CZ
a
NAME: DATE: SPECIFICATION: INDEX:
CAD
A3
NAME: John CREATED: 13.6.2009
GS0060.1
DO NOT SCALE DRAWING
TITLE:
DRW. NO.:
SCALE: 1:2
SHEET 1 OF 1
MAT.: Sestava_FUD
DRAW
TOLERANCES:
ISO 2768-mK
DEBUR AND BREAK
SHARP EDGES
SURF.: 0.743 m
2
SEMI.: --
REVISION:
touchCUE - 12x36 -3_11
uniCUE-12-B

10
Touch Panel Controllers / Mounting
© CUE, a.s. All Rights Reserved.
Mounting
Back Box
Physical Description
The back box (product code CS0409) provides a steel enclosure for uniCUE-7-B and uniCUE-12-B build-in
touch touch panel controllers. It is designed for pre-construction applications.
The back box is equipped with knockouts for cable installation.
134,8
189
45,8
7
1
62
4
5
3
Ra 3,2
)(
Poz Číslo dílu/Název dílu Popis Materiál Počet
1 GS0034.2 krabice se svorníky Sestava_FUD 1
2
GS0032.1 úchytka zámku levá Sestava_FUD 1
3
GS0033.1 úchytka zámku pravá Sestava_FUD 1
4
M- M3 s ISO 7040 - matice pojistná 1.4301 4
5
GM0363.1 jezdec 1.4301 2
6
S- M3 x 30 kh ISO 7045 - půlkulatá křížová hlava 1.4301 2
7
M-M3 ISO - 4032 - matice obyč 1.4301 4
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED
IN THIS DRAWING IS THE SOLE
PROPERTY OF FAKTUM DESIGN
ANY REPRODUCTION IN PART OR
AS A WHOLE WITHOUT THE WRITTEN
PERMISSION OF FAKTUM DESIGN
IS PROHIBITED.
WEIGHT.: 0.443 kg
LAST CHANGE: 18.3.2011
c
b
FAKTUM DESIGN
ČERNOVICKÁ 2B
617 00 BRNO
TEL.: [phone]
WWW.FAKTUM.CZ
a
NAME: DATE: SPECIFICATION: INDEX:
CAD
A3
NAME: John CREATED: 1.5.2010
GS0038.2
DO NOT SCALE DRAWING
TITLE:
DRW. NO.:
SCALE: 1:2
SHEET 1 OF 1
MAT.: Sestava_FUD
DRAW
TOLERANCES:
ISO 2768-mK
DEBUR AND BREAK
SHARP EDGES
SURF.: 0.133 m
2
SEMI.: --
REVISION:
podomítková krabice
Dimensions
Wiring knockouts
Thorns
Fixing tabs
Nuts for positioning of metal
holder with fi xing tabs and
thorns (left and right)
Plasterboard wall
supports incl. screws

11
Touch Panel Controllers / Mounting
© CUE, a.s. All Rights Reserved.
Installation into the Furniture or Plasteboard Wall
Steps are as follows
1. Cut out a hole 1 using the template delivered with back box. If you don’t have template, use following
dimensions.
5
5
4
2
3
1
6
7
8
Back Box CS0409 Cutout Template
45 mm30 mm60 mm
45 mm 30 mm 60 mm
135 mm
179 mm
7 mm
touchCUE-7-B Front Panel Outline
198 x 147 mm
touchCUE-12-B Front Panel Outline
320 x 225 mm
Back Box Cutout
7 mm
7 mm
2. Break suitable knockout 3 for comfortable stretch of cable.
3. Make sure that the rubber friction rings 8 lean against the supports 4 and supports 4 are in the right
position - left down, right up.
4. Insert the back box 2 into the cut-out 1 and take the cables through broken off knockout.
5. Fasten 2x support 4 to the wall using screws 5.
6. Adjust the metal holder 7 as described in the chapter Adjusting the Panel on the Wall.

12
Touch Panel Controllers / Mounting
© CUE, a.s. All Rights Reserved.
Installation into Wet Wall
Steps are as follows
1. Chisel out the mounting hole 1 in the wall.
2. Break suitable knockout 3 for comfortable stretch of cable.
3. Insert the back box 2 into the hole 1 and take the cables through broken off knockout.
4. Fix the back box 2 with mortar or plaster.
5. Neaten the visible front part of the back box with stuke or another appropriate material.
6. Adjust the metal holder 7 as described in the chapter Adjusting the Panel on the Wall.
2
3
1
6
7
~ 200 mm
~ 145 mm
~ 50 mm

13
Touch Panel Controllers / Mounting
© CUE, a.s. All Rights Reserved.
Adjusting Unit On The Wall
If the touch panel does not adhere to the wall perfectly, you can adjust it in the following way.
1. Take the panel out of the back box
2. Loosen the two nuts 6 on the metal holder 7 on the inside of the back box (the one with thorns and fixing
tabs).
3. Adjust the holder in a way to make the touch panel adhere neatly to the wall. Use guide ruler as described
below.
4. Tighten the two nuts 6.
5. Repeat steps 2 to 4 on the other side of the back box.
Guide ruler
A
A
ŘEZ A-A
Ra 3,2
)(
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED
IN THIS DRAWING IS THE SOLE
PROPERTY OF FAKTUM DESIGN
ANY REPRODUCTION IN PART OR
AS A WHOLE WITHOUT THE WRITTEN
PERMISSION OF FAKTUM DESIGN
IS PROHIBITED.
WEIGHT.: 0.443 kg
LAST CHANGE: 19.4.2011
c
b
FAKTUM DESIGN
ČERNOVICKÁ 2B
617 00 BRNO
TEL.: [phone]
WWW.FAKTUM.CZ
a
NAME: DATE: SPECIFICATION: INDEX:
CAD
A3
NAME: John CREATED: 1.5.2010
GS0038.2
DO NOT SCALE DRAWING
TITLE:
DRW. NO.:
SCALE: 1:1
SHEET 1 OF 1
MAT.: Sestava_FUD
DRAW
TOLERANCES:
ISO 2768-mK
DEBUR AND BREAK
SHARP EDGES
SURF.: 0.133 m
2
SEMI.: --
REVISION:
podomítková krabice
6
6
7
Points of contact between holder
and guide ruller
The wall

14
Touch Panel Controllers / Mounting
© CUE, a.s. All Rights Reserved.
Hold touch panel in the upright position and
push it into the back box so that the thorns
in the back box slide into the grooves in the
metal slat of the touch panel.
This enables you to tilt the panel, which holds
in this position, and mount cables.
If you want to place the panel in the back box,
hold it upright and push its bottom part stron-
gly as deep into the back box as possible.
Then push the upper part of the panel until
the two metal catches slide into the fixing
tabs.
Note:
If the touch panel does not adhere to the wall
perfectly, you can adjust it as described in the
capture Adjusting the Panel on the Wall.
Step 1 Step 2
Step 3 Step 4
Placing Unit Into The Back Box

15
Touch Panel Controllers / Mounting
© CUE, a.s. All Rights Reserved.
Taking Unit Out
Insert a thin screwdriver into each of the two little
holes on the sides of the touch panel and push
until the metal catches get loose.
Then you can tilt the upper part of the
touch panel.
Hold the panel upright and pull its bottom part
out. In this position you can tilt the panel to
mount cables.
If you need to remove the panel out
completely, hold it upright, push
downwards and pull it out.
Step 1 Step 2
Step 3 Step 4

16
Touch Panel Controllers / Cleaning
© CUE, a.s. All Rights Reserved.
Cleaning
You should clean the touch panel screen overlay after each day’s use.
Materials required are
1. Two clean, soft texture cloths (cotton).
2. Spray bottle of cleaning solution without alcohol (window cleaner).
3. Aluminium parts should be cleaned using a special cleaning solution.
Steps are
1. Turn the touch panel off.
2. Spray a small amount of the cleaning solution onto one of the cloths.
3. Clean the touch panel overlay with the damp cloth.
4. Wipe the touch panel overlay with the dry cloth.

17
Touch Panel Controllers / Connecting
© CUE, a.s. All Rights Reserved.
Connecting
Rear Panel Overview
CUEnet RELAY
21
NC C NO NC C NO
4321
OUTIN
AUDIO LINE
RGLL G R
GENERAL I/O
S S S S G
1 2
SERIAL
1234512345
24 V DC
PWR IN
+ G
IR/SERIAL
4321
S G S G S G S G
+ G
OUT
5 V DC
(LAN)
SYSTEM
DEFAULT
Output 5 VDC
Audio line output
Audio line output
Button system default
2x Relay4x General I/O4x IR/Serial output2x Bi-directional serial port
CUEnet (LAN)
Power 24 VDC

18
Touch Panel Controllers / Connecting
© CUE, a.s. All Rights Reserved.
CUEnet (LAN)
10/100 BaseT LAN Connector
The 10/100 BaseT LAN is a standard network connection 10/100 BaseT LAN using RJ-45 connector.
There is no auto sense, which means it does not recognize straight through cable to cross-over cable. For
the direct PC connection it is necessary to use cross-over cable; for the connection to Ethernet switch straight
through cable.
The length of the Ethernet cable connecting touch panel to the network must not exceed 100 meters.
Connector pin out
RJ-45 Pin Signal Cat5 Cable Color
1 TX_D1+ and PoE White / Orange
2 TX_D1- and PoE Orange
3 RX_D2+ and PoE White / Green
4 Blue
5 White / Blue
6 RX-D2- and PoE Green
7 White / Brown
8 Brown
Direct PC Connection
Attach one end of an RJ-45 Ethernet cable to the CUEnet (LAN) port and attach the other end of the RJ-45
Ethernet cable to your computer. Use straight-through cable if your PC supports autosense or crossed-over
cable if your PC doesn’t support autosense.
LAN Network Connection
Attach one end of an RJ-45 Ethernet straight-through cable to the CUEnet (LAN) port and attach the other end
of the RJ-45 Ethernet cable to your computer.
Ethernet cable straight-through
Network
Ethernet cable
straight-through or crossed-over

19
Touch Panel Controllers / Connecting
© CUE, a.s. All Rights Reserved.
Windows Local Network Settings
For Windows 7 steps are
1. Start Windows 7.
2. Click Start.
3. Enter ncpa.cpl to the Search Box and press
Enter. Following window is displayed.
For Windows XP steps are
1. Start Windows XP.
2. Click Start, then click Control Panel choose the
option to switch to Classic View.
3. Double-click Network Connections.
Following steps are
1. Right-click on network adapter used for
connection with touch panel controller and
then right-click and select Properties.
2. Select Internet Protocol (TCP/IP) and click
Properties button.
3. Select Use the following IP address option.
Set IP address to 192.168.1.1 (or other
address different from 192.168.1.127 and
from 192.168.1.128) and Subnet mask to
255.255.255.0. Leave other options unchanged
and click OK.

20
Touch Panel Controllers / Connecting
© CUE, a.s. All Rights Reserved.
PWR IN
The uniCUE requires power from an external power supply. The standard CUEadapter /30W is delivered with
the unit. Attach the 2-pin connector of the power supply unit to the PWR IN connector located on the rear
panel and attach power cable to a power outlet.
Warning: Use any unit only with the power adapter supplied in the product package. Using another power
supply may damage the unit.
Connector pin out
PWR IN
2-pin 3.5 mm Pin Description
+ G
+ Power +24 VDC
G Ground
OUT 5 V
Connector pin out
PWR OUT
2-pin 3.5 mm Pin Description
+ G
+ Output +5 VDC, max. 1 A
G Ground