Aventics EMERSON SentronicPLUS 614 Series User manual

IM14229-GB/R05
(3835192-B)
Installation manual
Digital Pressure Regulator
SentronicPLUS
Series 614
GB

CONTENTS
1. Description .......................................................................................................................................................3
1.1 Catalogue number ..................................................................................................................................3
1.2 Operating elements.................................................................................................................................4
1.3 Operating modes ....................................................................................................................................4
2. Electrical connection .........................................................................................................................................5
3. Analog setpoint - outlet pressure .......................................................................................................................7
4. Pneumatic connection .......................................................................................................................................8
5. Technical characteristics ....................................................................................................................................8
5.1 Fluid characteristics.................................................................................................................................8
 5.2 Specications..........................................................................................................................................9
6. Accessories...................................................................................................................................................... 10
7. Maintenance and care......................................................................................................................................10
8. Dimensions and weight ................................................................................................................................... 11
INSTALLATION
GB
2Visit our website at Emerson.com/AVENTICS
CAUTION!Dangerous operating conditions may occur when using the programming interface on the valve as the valve may possibly
not react to the analog setpoint any more.
Provide for protection against uncontrolled movement of equipment when putting the valve into operation and before making
anymodicationstothevalvesettings.
NOTICE
The information in this manual is subject to change without notice.
In no event shall EMERSON be liable for technical or editorial errors or omissions. Neither is any liability assumed for accidental or
consequential damages arising out of or in connection with the supply or use of the information contained herein.
THIS MANUAL CONTAINS INFORMATION PROTECTED BY COPYRIGHT. NO PART OF THIS DOCUMENT MAY BE PHOTOCOPIED OR
REPRODUCED IN ANY FORM OR MANNER WHATSOEVER WITHOUT PRIOR WRITTEN PERMISSION FROM EMERSON.
COPYRIGHT © 2016 - EMERSON GMBH, OTTO-HAHN-STRASSE 7-11, 75248 ÖLBRONN-DÜRRN - All rights reserved.
ESD
This product complies with the essential requirements of the EMC Directive 2014/30/EU and its amendments. It is CE-approved.
A separate Declaration of Conformity is available on request.
Please provide ordering code and serial numbers of products concerned.
We herewith declare that the version of the product described in this installation manual is intended to be incorporated into or assembled with
other machinery and that it must not be put into service until the machinery into which it is to be incorporated has been declared in conformity
with the provisions of Council Directive 2006/42/EC.
Handling,assemblyandputtingintoserviceandallsettingsandadjustmentsmustbedonebyqualied,authorisedpersonnelonly.
This product contains electronic components sensitive to
electrostatic discharge. An electrostatic discharge generated by a
person or object coming in contact with the electrical components
can damage or destroy the product.
To avoid the risk of electrostatic discharge, please observe the
handling precautions and recommendations contained in standard
EN 100015-1. Do not connect or disconnect the device while it is
energised.
CAUTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC SENSITIVE DEVICES
!

INSTALLATION
GB
3
Visit our website at Emerson.com/AVENTICS
B: Control panel
A = M12 without display - non-explosionproof
D = M12 with display - non-explosionproof
E = M12 without display - explosionproof (ATEX)
F = DIN connector, 7-pin, with display - non-explosionproof
G = DIN connector, 7-pin without display - non-explosionproof
A: VERSION (ports), body
0 = DN6 (G 1/4), Alu 6 = DN20 (NPT 1"), Alu
1 = DN12 (G 1/2), Alu 7 = DN3 (G 1/8), Ms
2 = DN20 (G 1), Alu 8 = DN6 (G 1/4), Ms
3 = DN6 (ISO 1), Alu 9 = DN3 (NPT 1/8), Ms
4 = DN6 (NPT 1/4"), Alu A = DN6 (NPT 1/4"), Ms
5 = DN12 (NPT 1/2"), Alu C = DN6 (G 1/4), VA
H = DN6 (G 1/4), Ms2)
S: SETPOINT
0 = 0 ... 10 Volt
1 = 0 ... 20 mA
2 = 4 ... 20 mA
I: FEEDBACK
1 = Feedback output 0 ... 10 Volt
2 = Feedback output 0 ... 20 mA
3 = Feedback output 4 ... 20 mA
4 = Feedback input 0 ... 10 Volt3)
5 = Feedback input 0 ... 20 mA3)
6 = Feedback input 4 ... 20 mA3)
1. DESCRIPTION
The SentronicPLUS with integrated digital control loop combines the latest in pneumatics technology with
intelligent electronics. The SentronicPLUSseriesallowsprecisecontrolofpressure,ow,force,velocityand
displacement or angle positions. It supplements the SentronicDseries.
The SentronicPLUS is available in 14 standard pressure ranges from 100 mbar to 50 bar. Four nominal sizes
areprovidedtocoverawideowrange.Versionswithdifferentbodyandsealmaterialscanbeusedinmany
sectors, e.g. the food industry, medical technology etc.
Cascaded control allows setting up complex control loops using the DaS software (Data Acquisition Soft-
ware). Digital control offers many advantages during installation and start-up of the SentronicPLUS valve and
extended possibilities to adapt it to various applications.
• All pressure and exhaust ports are the same size, which allows for short response times when the pres-
sure is increased or decreased.
• Digital pressure control in a closed loop: An internal pressure sensor measures the outlet pressure. The
outlet pressure is adjusted in real time.
• The control parameters can be changed with the DaS software (from DaS release 5.00): The DaS soft-
ware (DataAcquisitionSoftware)ensuresthevariabilityoftheparametersusedbythevalve.Thisex-
ibility allows the valve to be adapted to the most various applications, and its response time, overshoot
and precision to be optimised.
• Afterhavingsettheoptimumparameters,youcansavetheminaprojectleforyourpersonaluseor
send them to our Product Support for future serial production.
• ATEX approval for the version with M12 connector without display:
qII 3D Ex tc IIIC T135°C Dc X
qII 3G EX ec IIC T4 Gc X
0 ≤Ta ≤+50 °C
1.1 CATALOGUE NUMBER
SentronicPLUS - Digital electronic pressure regulator valve
6 1 4 3 5 7 B A S I D P P
SentronicPLUS - with external pressure supply
6 1 4 3 5 9 B A S I D P P
PP: PRESSURE RADNE
Max. allowable
pressure (bar)
2
2
2
3
8
8
12
12
14
18
22
40
60
D: DIGITAL OUTPUT
1 = Pressure switch output
PNP ± 5 %
Relative pressure
40 = 0 - 100 mbar
50 = 0 - 500 mbar
60 = 0 - 1 bar
02 = 0 - 2 bar
03 = 0 - 3 bar
05 = 0 - 5 bar
06 = 0 - 6 bar
10 = 0 - 10 bar
12 = 0 - 12 bar
16 = 0 - 16 bar1)
20 = 0 - 20 bar1)
3H = 0 - 30 bar2)
5H = 0 - 50 bar2)
V3 = 0 - (-1) bar
Notes:
1) Only for DN3 and DN 6
2) Only for DN6, Ms
3) Only for 614357..., not for 614359...
Other versions available on request.
Vacuum (relative)
V3 = 0 ... -1 bar
Shut-off valve

INSTALLATION
GB
4Visit our website at Emerson.com/AVENTICS
1.2 OPERATING ELEMENTS
1.3 OPERATING MODES
Shut-off:
If the setpoint falls below 0.5 %, the coil current is switched off and the valve is fully exhausted.
Overtemperature:
If the temperature of the internal control electronics exceeds 100°C, the operating mode is switched to AU-
TOSAFE.
Undervoltage / overvoltage:
If the supply voltage is less than 18 V or more than 30 V, the coil current is switched off and the valve is fully
exhausted..
Autosafe:
If the coil current exceeds a certain value, dependent on the mechanics, for more than 20 seconds, the output
current is limited to max. 70% to prevent the valve from overheating.
1 Proportional solenoid coil
2.1 Pressure supply
2.2 Pressure outlet
2.3 Exhaust
3 Power supply, M12 connector or
7-pin DIN connector
4 Ground connection M4
5 Mounting hole
6 Serial communication RS232 (PC connection)
7 LC display
8 2 pushbuttons
6
4
2.2
5
7
8
3
1
2.1
52.3

INSTALLATION
GB
5
Visit our website at Emerson.com/AVENTICS
1) The valve must only be supplied with 24V DC ±10% and a max. ripple of 10% (no supply via diode bridge). Overvolt-
age or a ripple rate exceeding these tolerances can damage the electronics.
2) The max. current at the digital output is 200 mA/4.8W (PNP output). The output is protected against short circuit
and overload.
3) If a relay (inductive load) is connected to the pressure switch output, a freewheel diode or a varistor must be used.
4) A shielded cable must be used for protection against interference and EMC.
5) Thevalvehousingmustbeconnectedtothegroundpotentialwithlowresistanceviathegroundconnection(ØM4).
The eyelet of the grounding cable must be inserted between two toothed washers and fastened with a screw (M4).
The tightening torque corresponding to the screw must be observed.
2. ELECTRICAL CONNECTION
CONNECTOR PINNING / CABLE WIRING
1
23
5
4
5-pin M12 female connector
250 Ohm
at current
setpoint
Valve
M12 connector
+24V supply voltage
Supply voltage GND
Setpoint GND
(only for 6-wire cable)
Setpoint
0-10V
(or 0-20 / 4-20mA)
Feedback
0-10V
(or 0-20 / 4-20mA)
Control
Analog output:
Only at current output:
max. 500 ohm
PNP when setpoint is reached
(setpoint=feedback)
Shield
=200mA max./4.8W
Inductive
load
M4 connection
on valve body
Connector housing
Digital output:
❉A 6-wire cable with separate analog ground is used for cable lengths over 2 m to set off the voltage drop for the setpoint.
Pin Description 5-wire cable 6-wire cable
1 24V voltage supply brown brown
2 Analog setpoint input white white
3 Supply ground blue green
Analog ground ❉yellow
4 Analog output (feedback) black pink
5 Digital output (pressure
switch)
grey grey
Body EMC screen shield shield

INSTALLATION
GB
6Visit our website at Emerson.com/AVENTICS
2
PE
ØM4
CAUTION - BE SURE TO FOLLOW THESE INSTRUCTIONS!
1) The coil must only be supplied with 24 V DC ±10 % and a max. ripple of 10 % (no supply via
diode bridge). Overvoltage or a ripple rate exceeding 10 % can damage the electronics.
2) Themax.currentatpin 7is500mA (NPN/PNPoutput). Pin7is protectedagainstshortcircuit
and overload.
3) If a relay (inductive load) is connected to the pressure switch output, a freewheel diode or
a varistor must be used.
4) Do not solder unused pins on the connector.
5) In case of an interruption in the pressure supply, shut off the power supply (+24V) or switch
the set point to zero to avoid excessive heating of the coil.
6) Grounding for personal protection must be done at the PE terminal (ØM4) on the body (see
diagramme opposite).
7) The valve housing must be connected to the ground potential with low resistance via the
groundconnection (ØM4).The eyeletofthe groundingcablemust beinserted betweentwo
toothed washers and fastened with a screw (M4). The tightening torque corresponding to
the screw must be observed.
!
+24V Supply voltage
Supply voltage GND
Setpoint
10V (or 0-20 mA or 4-20 mA)
Setpoint GND
(Output)
Not used
Outlet pressure feedback
0-10V (or 0-20mA or 4-20mA)
PRESSURE SWITCH OUTPUT
NPN if setpoint
is reached
PNP if setpoint
is reached
NPN if setpoint
is not reached
PNP if setpoint
is not reached
NPN
Feedback = Setpoint
+ 30V max.
+ 30V max.
0V
I = 500 mA max.
I = 500 mA max.
I = 500 mA max.
I = 500 mA max.
PNP
Feedback = Setpoint
NPN
Feedback ≠
Setpoint
PNP
Feedback ≠
Setpoint
Connector on
electronic card
NPN
PNP
NPN
PNP
7-pin DIN connector
View on solder side
of female connector
or
or
or

INSTALLATION
GB
7
Visit our website at Emerson.com/AVENTICS
10 V
20 mA
20 mA
0
0
4
5 V
10 mA
12 mA
50 mV
0.1 mA
4.08 mA
+50% PMR
-50% PMR
Setpoint span
The pressure span of the setpoint can be changed via the DaS software. Switch to "Custom" in the "Setpoint setting"
section. The span is between +10 and +150 %.
CAUTION: Outlet pressures above the maximum outlet pressure (PMR) are not controlled by the valve, i.e. the max.
outlet pressure is limited to the PMR.
In order to avoid damaging the sensor, the supply pressure must always be less than the maximum inlet pressure
(MAP) (see Table).
The span can be set to max. 100% of the maximum outlet pressure (PMR). It can only be decreased.
3. ANALOG SETPOINT - OUTLET PRESSURE
Setpoint offset
The pressure setpoint zero can be changed via the DaS software. Switch to "Custom" in the "Setpoint setting" section.
The zero range is max. -50 ... +100 %.
Span adjustment
Offset adjustment
Max.
outlet pressure
PMR
SHUT-OFF
Max.
outlet pressure
PMR
(bar)
Max.
inlet pressure
MAP
(bar)
0 - 100 mbar 2
0 - 500 mbar 2
0 - 1 bar 2
0 - 2 bar 3
0 - 3 bar 8
0 - 5 bar 8
0 - 6 bar 12
0 - 10 bar 12
0 - 12 bar 14
0 - 16 bar1) 18
0 - 20 bar1) 22
0 - 30 bar2)40
0 - 50 bar2) 60
1) For DN3 and DN6 only.
2) For DN6, Ms, only.
10 V
20 mA
20 mA
0
0
4
50 mV
0.1 mA
4.08 mA
Factory
setting: 0%
Max. outlet
pressure
PMR
SHUT-OFF
Max. outlet
pressure
PMR
Factory
setting: 100%
50% setting

INSTALLATION
GB
8Visit our website at Emerson.com/AVENTICS
4. PNEUMATIC CONNECTION
 Theairowisfromport1toport2.
Inch screw connections (pipe threads) must be used.
Eachscrewconnectionsmustbelinedwithattingsyntheticsealingdisc.
DonotuseTeonsealingtapeorhempastheymaygetinsidethevalveanddamageit.
Use an appropriate silencer at port (3). The exhaust time may vary depending on the type of silencer used.
The diameter of the pneumatic lines must be adjusted to the nominal diameter of the valve. The diameter of outlet
line (2) must be larger or equal to that of inlet line (1).
The supply pressure must always be less than the value given in the table in section 3 and must always be above
the desired outlet pressure.
5. TECHNICAL CHARACTERISTICS
CONSTRUCTION INSTALLATION
Directly operated valve
Body: Aluminium
Internal parts: POM
Seals:Nitrile(NBR),uorelastomer(FPM)
Degree of protection: IP65
Safety code: qII 3D Ex tc IIIC T135°C Dc X
qII 3G EX ec IIC T4 Gc X
0 ≤Ta ≤+50°C
Assembly position: any; for optimum performance
vertically with solenoid at the top.
Connections:withouthemporTeonsealingtape
Electrical connection: Select a wire section that will
give a a voltage drop of less than 2 volts at 2A.
5.1 FLUID CHARACTERISTICS
FLUIDS : Airorneutralgases,lteredat50µm,condensate-free,lubricatedor
unlubricated
Class 5 according to ISO 8573-1:2010 [7:4:4]
PORTS : G1/8-G1/4-G1/2-G1
MAX. INLET PRESSURE : see section 1.1
TEMPERATURE / FLUID : 0...60 °C
TEMPERATURE / AMBIENT : 0...50 °C
HYSTERESIS : <1% of span
LINEARITY : <0,5% of span
REPEATABILITY : <0,5% of span
MINIMUM SETPOINT : 50mV (0,1 mA/4,08mA) with shut-off function
MINIMUM OUTLET PRESSURE : 1% of span
Pressure supply 1
Exhaust 3 Pressure outlet 2

INSTALLATION
GB
9
Visit our website at Emerson.com/AVENTICS
Setpoint input : 0 ... 10 V (100 kOhm input resistance)
0 ... 20 mA / 4 ... 20 mA (250 Ohm input resistance)
Feedback output : 0 ... 10 V (max. 10 mA), short-circuit protected
0 ... 20 mA / 4 ... 20 mA (max. 24 VDC)
Digital output : pnp; open collector; max. 200 mA/4.8W, short-circuit protected
HIGH (24 VDC) if feedback=setpoint
LOW (open) if feedback≠setpoint
5.2 SPECIFICATIONS
Nominal
diameter
DN
(mm)
Supply
voltage (1)
(stabilised)
Max. power
(W)
Max. current
(mA)
Insulation
class
Degree of
protection
Flow (2)
Electrical connections
KV
(Nm3/h)
at 6 bar
(l/min
ANR)
3
6
12
20
24 V= +/-10%
12
24
34
44
500
1000
1400
1800
F IP 65
0,18
0,60
1,20
4,80
210
700
1400
5600
5-pin female M12 connector
or
7-pin female DIN connector
(1) Residual ripple: 10 %
(2) Test conditions according to ISO 8778: temperature: 20 °C, relative inlet pressure: 6 bar, relative outlet pressure: 5 bar
INSTALLATION AND OPERATING INSTRUCTIONS
1. Before putting into operation carefully check all electrical connections and the supply voltage (24 VDC ±10 %).
Overload can destroy the electronics. Recommended pre-fuse T2.0 A.
2. The electrical connection is made with a round connector M12x1. The connector must meet the requirements
of DIN 60079-15. The product was tested with connector catalogue no. 88100729.
In order to ensure conformity with ATEX Directive 2014/34/EU, the product must be installed in such a manner
as to protect the electrical connector from mechanical stress.
WARNING:
Do not disconnect the connector while under voltage!
3. Use shielded cables for the electrical connection of the valve. The shield, connector and control cabinet must
be EMC compliant. The valve body must be electrically connected to ground (PE, machine ground). Do not run
control cables parallel to high-voltage lines, servo-motor control cables etc.
4. Min. wire cross-section of supply voltage cable: 0.50 mm2.
For longer cabling distances use larger cross-section cables as required.
5. Make sure that the valve is under pressure when a setpoint signal is applied to the valve (applying a setpoint
signal with no pressure on the valve will cause it to overheat).
6. The valve is factory adjusted.
7. The product must be returned to the factory for repair.

INSTALLATION
GB
10 Visit our website at Emerson.com/AVENTICS
6. ACCESSORIES
7. MAINTENANCE AND CARE
No special maintenance or care required.
description catalogue number
Straight M12 female connector, 5 pins, with screw terminals 88100256
Right-angle M12 female connector, 5 pins, with screw terminals 88100725
Supply cable 2 m, 2 x 0,25 mm², straight connector 88100726
Supply cable 2 m, 2 x 0,25 mm², right-angle connector 88100727
Supply cable 5 m, 6 x 0,56 mm², straight connector 88100728
Supply cable 5 m, 6 x 0,56 mm², right-angle connector 88100729
Supply cable 10 m, 6 x 0,56 mm², straight connector 88100730
Supply cable 10 m, 6 x 0,56 mm², right-angle connector 88100731
Parameter adapter USB, 1 m cable N50930300100000
WARNING NOTES
These products are intended for use in industrial compressed air systems only. Do not use these products where
pressures and temperatures can exceed those listed under SPECIFICATIONS. Please also see the corresponding prod-
uctspecicationsheets.
Beforeusingtheseproductswithuidsotherthanthosespecied,fornon-industrialapplications,life-supportsys-
tems,orotherapplicationsnotwithinpublishedspecications,consultEMERSON.
Throughmisuse,age,ormalfunction,componentsusedinuidpowersystemscanfailinvariousmodes.
The system designer is warned to consider the failure modes of all component parts used in fluid power systems
and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such
failure.
System designers must provide a warning to end users in the operating manual if protection against a failure mode
cannot be adequately ensured.
Systemdesignersandendusersarecautionedtoreviewspecicwarningsfoundininstructionsheetspackedand
shipped with these products.

INSTALLATION
GB
11
Visit our website at Emerson.com/AVENTICS
8. DIMENSIONS (mm), WEIGHT (kg)
SentronicPLUS - Digital electronic pressure regulator valve with M12 connection
Weight: 1,650 kg
G 1/4
Weight: 0,850 kg
G 1/2
G 1/8
Weight: 0,550 kg
PE(4-8 deep)
3xG1/8"-8 deep
2xM4-10 deep
PE(4-8 deep)
3xG1/4"-12 deep
3xG1/2"-14 deep
PE(4-8 deep)

INSTALLATION
GB
12 Visit our website at Emerson.com/AVENTICS
8. DIMENSIONS (mm), WEIGHT (kg)
SentronicPLUS - Digital electronic pressure regulator valve with M12 connection
G 1
Weight: 3,400 kg
**
3xG1"-18 deep
PE(4-8 deep)

INSTALLATION
GB
13
Visit our website at Emerson.com/AVENTICS
G 1/4
Weight: 0,850 kg
G 1/8
Weight: 0,550 kg
max. 145
PE(M4; 8)
18
25
34.8
29
25
10
26.6
80.5
3xG1/8"; 8
57
25
15
max.175
3xG1/4"; 12
PE(M4; 8)
36
68
105.2
55.3
45.3
11.02
34.8
43
52
10
30
*
*
26
8. DIMENSIONS (mm), WEIGHT (kg)
SentronicPLUS - Digital electronic pressure regulator valve with 7-pin DIN connector

INSTALLATION
GB
14 Visit our website at Emerson.com/AVENTICS
G 1
Weight: 3,400 kg
max.197
100.7
60
68
45.5
3xG1"; 18
PE(M4; 8)
100
80
20
48
15
79
96
60
34.8
Weight: 1,650 kg
G 1/2
max.185
45
53
34.5
136
81
63.5
15
40
12
57.5
70
45
34.8
PE(M4; 8)
3xG1/2"; 14
8. DIMENSIONS (mm), WEIGHT (kg)
SentronicPLUS - Digital electronic pressure regulator valve with 7-pin DIN connector

INSTALLATION
GB
15
Visit our website at Emerson.com/AVENTICS
35
52
43
11
10
26
30
45,3
55,3
114,7
2x Ø4,3
105,3
18
36
54
86
2x Ø4,3
3
1
2
8. DIMENSIONS (mm), WEIGHT (kg)
SentronicPLUS - with external pressure supply and M12 connection
Weight: 1,800 kg
G 1/4
Weight: 1,000 kg
G 1/2
G 1/8
Weight: 0,700 kg
25
29
10
18
26,6
15
25
35
80,5
95,2
25
43
75
3
1
2
35
45
57,5
70
12
15
34,5
40
63,5
81
129,2
136
2x Ø5
22,5
45
53
71
103
2x Ø5
3
1
PE(4-8 deep)
3xG1/8"-8 deep
PE(4-8 deep)
3xG1/4"-12 deep
3xG1/2"-14 deep
PE(4-8 deep)

INSTALLATION
GB
16 Visit our website at Emerson.com/AVENTICS
8. DIMENSIONS (mm), WEIGHT (kg)
SentronicPLUS - with external pressure supply and M12 connection
G 1
Weight: 3,550 kg
30
60
68
86
118
35
60
79
96
20
15
45,5
48
80
100
142,7
183,2
2x Ø7
2x Ø7
1
3
3xG1"-18 deep
PE(4-8 deep)
durchgehend

INSTALLATION
GB
17
Visit our website at Emerson.com/AVENTICS
8. DIMENSIONS (mm), WEIGHT (kg)
SentronicPLUS - with external pressure supply and 7-pin DIN connector
G 1/4
Weight: 1,000 kg
G 1/8
Weight: 0,700 kg
max.145
PE(M4; 8)
18
25
34.8
29
25
10
26.6
80.5
3xG1/8"; 8
75
25
15
max.175
3xG1/4"; 12
PE(M4; 8)
36
86.063
105.2
55.3
45.3
11.02
34.8
43
52
10
30
*
*
26

INSTALLATION
GB
18 Visit our website at Emerson.com/AVENTICS
8. DIMENSIONS (mm), WEIGHT (kg)
SentronicPLUS - with external pressure supply and 7-pin DIN connector
G 1
Weight: 3,550 kg
Weight: 1,800 kg
G 1/2
max.185
45
53
34.5
136
81
63.5
15
40
12
57.5
70
45
34.8
PE(M4; 8)
3xG1/2"; 14
103
max.197
118.7
60
68
45.5
3xG1"; 18
PE(M4; 8)
100
80
20
48
15
79
96
60
34.8
Availability,designandspecicationsaresubjecttochangewithoutnotice.Allrightsreserved.

IM14229-FR/R05
(3835192-B)
Manuel d'installation
Régulateur de pression numérique
SentronicPLUS
Série 614
FR

INSTALLATION
2Visit our website at Emerson.com/AVENTICS
FR
SOMMAIRE
1. Description .............................................................................................................................................. 3
1.1 Code............................................................................................................................................... 3
1.2 Composants de fonctionnement..................................................................................................... 4
1.3 Modes de fonctionnement.............................................................................................................. 4
2. Raccordement électrique.......................................................................................................................... 5
3. Consigne analogique - Pression de sortie .................................................................................................. 7
4. Raccordement pneumatique .................................................................................................................... 8
5. Caractéristiques techniques...................................................................................................................... 8
 5.1 Caractéristiquesuides .................................................................................................................. 8
 5.2 Spécications ................................................................................................................................. 9
6. Accessoires..............................................................................................................................................10
7. Maintenance et entretien.........................................................................................................................10
8. Encombrements et masses ......................................................................................................................11
ATTENTION! Des conditions d’exploitation dangereuses peuvent se développer en utilisant l’interface de programmation sur la
vanne étant donné que la vanne ne réagira éventuellement plus à la consigne analogique appliquée.
Assurer une protection contre des mouvements incontrôlés de l’équipement lors de la mise en service de la vanne et avant
d’effectuerdesmodicationssurlesréglagesdelavanne.
ESD
!
Ce produit contient des composants électroniques sensibles aux
décharges électrostatiques. Tout contact des connexions par
une personne ou un objet chargé d’électricité statique pourrait
entraîner la mise en panne ou la destruction de l’appareil.
Pour réduire les risques de décharges électrostatiques, veuillez
respecter les recommandations et
précautions de manipulation
déniesparlanormeEN100015-1,avanttouteinterventionsurce
produit.
Nejamaisbrancheroudébrancherl’appareillorsqu’ilest
sous tension.
NOTES
Les informations contenues dans le présent manuel sont susceptibles d’être modifiées sans préavis.
EMERSONnepeutêtretenuresponsabledesomissionstechniquesourédactionnelles,nidesdommagesaccidentelsouconsécutifs
à la fourniture ou l’utilisation du présent document.
LEPRESENTMANUELCONTIENTDESINFORMATIONSPROTEGEESPARCOPYRIGHT,AUCUNEPARTIEDUPRESENTDOCUMENTNEPEUT
ETREPHOTOCOPIEEOUREPRODUITESOUSQUELQUEFORMEQUECESOITSANSAUTORISATIONECRITEPREALABLEDEEMERSON.
COPYRIGHT©2016 - EMERSON - Tous droits réservés.
CeproduitestconformeauxexigencesessentiellesdelaDirective2014/30/UEsurlaCompatibilité
Electromagné-
tique,etamendements.Unedéclarationdeconformitépeutêtrefourniesursimpledemande.
Veuillez nous indiquer les références ou codes des produits concernés.
Parlaprésentenousdéclaronsqueleproduitdécritdanscemanueld’installation,estdestinépourêtreinstallédansunemachineouàêtreassembléà
uneautremachine:Toutefoisilestinterditdemettreleproduitenfonctionnementtantquelamachinedanslaquelleilestdéstinéàêtreincorporéou
l’ensembledemachinessolidairesauquelildoitêtreassemblén’aurapasétédéclaréconformeauxdispositionsdelaDirectiveMachines2006/42/CE.
Toutesopérationsdemanutention,d’installationetdemiseenservice,ainsiquelamiseaupointetleréglagedoiventêtreeffectuésuniquement
parunpersonnelqualiéetautorisé.
ATTENTION
RESPECTER LES PRECAUTIONS DE
MANIPULATION
DES PRODUITS SENSIBLES
AUX DECHARGES
ELECTROSTATIQUES