Cuisinart SCO-60A User manual

CLEANING INSTRUCTIONS
1. Be sure the plug has been removed from outlet.
2. Remove can opener lever by lifting and pulling
toward you. Wash by hand with hot, sudsy water
or place in the top shelf of a dishwasher.
Dry thoroughly.
3. Wipe body of can opener with damp cloth.
(Caution: Do not immerse in water.)
4. Replace can opener lever by holding in the upright
position and snapping back into place.
SUGGESTIONS
This can opener will open all standard size cans.
It should not be used on cans that have alternate
methods of opening (including but not limited
to pull-tabs, rolling key and peel-off foil). It also
should not be used with rimless cans or cans with
angled corners.
Cans with aluminum lids will not adhere to magnet.
If there is a dent in the rim of the can, open other side
or place the Power Cut blade beyond the dent. If the
can opener stalls, use a light touch to turn the can to
aid the cutting process.

LIMITED THREE-YEAR WARRANTY
This warranty supersedes all previous warranties on Cuisinart®Deluxe Stainless Steel
Can Opener. This warranty is available to consumers only. You are a consumer if you
own a Cuisinart®Deluxe Stainless Steel Can Opener that was purchased at retail for
personal, family, or household use. Except as otherwise required under applicable
state law, this warranty is not available to retailers or other commercial purchasers or
owners. We warrant that your Cuisinart®Deluxe Stainless Steel Can Opener will be
free of defects in material or workmanship under normal home use for three years
from the date of original purchase. We suggest that you complete and return the
enclosed product registration card promptly to facilitate verification of the date of
original purchase. However, return of the product registration card does not eliminate
the need for the consumer to maintain the original proof of purchase in order to obtain
the warranty benefits. In the event that you do not have proof of purchase date, the
purchase date for purposes of this warranty will be the date of manufacture.
If your can opener should prove to be defective within the warranty period, we will
repair it or, if we think it necessary, replace it. To obtain warranty service, please call
our Consumer Service Centre toll-free at 1800 808 971 (AUST), 0800 435 000 (NZ),
or write to:
Cuisinart Australia
24 Salisbury Road
Asquith NSW 2077
or
Cuisinart New Zealand
44 Apollo Drive
Mairangi Bay
Auckland New Zealand
Please also be sure to include a return address, daytime phone number, description
of the product defect, product serial number (stamped on bottom of product base),
and any other information pertinent to the product’s return.
NOTE: For added protection and secure handling of any Cuisinart®productthatis
being returned, we recommend you use a traceable, insured delivery service.
Cuisinart cannot be held responsible for in-transit damage or for packages that are
not delivered to us. Lost and/or damaged products are not covered under warranty.
Your Cuisinart®Deluxe Stainless Steel Can Opener has been manufactured to strict
specifications and has been designed for use with the Cuisinart®Deluxe Stainless
Steel Can Opener accessories and replacement parts. These warranties expressly
exclude any defects or damages caused by accessories, replacement parts, or repair
service other than those that have been authorised by Cuisinart. These warranties do
not cover any damage caused by accident, misuse, shipment, or other than ordinary
household use. These warranties exclude all incidental or consequential damages.
BEFORE RETURNING YOUR CUISINART PRODUCT
If you are experiencing problems with your Cuisinart®product, we suggest that you call
our Consumer Service Centre at 1800 808 971 (AUST), 0800 435 000 (NZ) before
returning the product for servicing. Often, our Consumer Service Representatives can
help solve the problem without having the product serviced. If servicing is needed, a
Representative can confirm whether the product is under warranty and direct you to
the nearest service location.
© 2008 Cuisinart Cuisinart®is a registered trademark of Cuisinart
150 Milford Road, East Windsor, NJ 08520
Printed in China. 04CU13355
S&H1618/08
IB-8/068

Instruction Booklet SCO-60A
Deluxe Stainless Steel Can Opener

IMPORTANT
SAFEGUARDS
When using electrical appliances, basic safety precautions
should always be followed including the following:
1. READ ALL INSTRUCTIONS.
2. To protect against risk of electrical shock, do not
immerse cord, plug or can opener in water or
other liquid.
3. Close supervision is necessary when any
appliance is used by or near children.
4. Unplug from outlet when not in use, before putting
on or taking off parts, and before cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord
or plug, or after the appliance malfunctions, or is
dropped or damaged in any manner.
7. The use of attachments not recommended or sold
by Cuisinart may cause fire, electrical shock, or risk
of injury.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter,
or touch hot surfaces.
10. Do not open pressured (aerosol type) cans.
11. Do not open cans of flammable liquids such as
lighter fluid.
12. Do not use can opener for other than intended use.
13. Do not leave unattended while in use.
14. This appliance is intended for household use only
and not for commercial or industrial use.
15. Caution: Do not immerse in water.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.

Children should be supervised to ensure that they do
not play with the appliance.
If the supply cord is damaged, it must be replaced by
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
FOR HOUSEHOLD
USE ONLY
SAVE THESE
INSTRUCTIONS
INTRODUCTION
Congratulations! You now have a can opener you’ll be
proud to display on your kitchen counter. This very
contemporary Cuisinart®Can Opener is constructed
of sturdy stainless steel, with smooth lines and an
extra-wide base. Good looking, and almost impossible
to tip, it requires only a quick press of the lever to
operate. Opening cans has never been easier.
OPERATING
INSTRUCTIONS
1. Plug cord into outlet.
2. Raise can opener lever.
3. Position the can under the guiding
posts and lower the lever, making
sure the Power Cut blade is
positioned inside the rim of the can.
4. Once the Power Cut blade pierces
the can, cutting begins. There is no
need to hold the lever down
during cutting.
5. Cutting action will automatically stop,
once can is completely open.
6. Can will remain in position until lever
is lifted.
7. To remove can, hold can firmly
with one hand while lifting lever
with the other.
8. Carefully remove lid from magnet.
4
2
1
3

1.
1. Power Cut Blade Assembly
2. Can Opener Lever
3. Guiding Posts
4. Can Stop
5. Base
6. Cord Storage (not shown)
3.
6.
5.
4.
3.
2.