WARRANTY
STEP 5 – Slide gliders
(#6) forward and
align lower rail of
bottom wire basket
(#1) with the clips on
gliders (#6) and snap
into place.
LIFETIME WARRANTY (U.S. and Canada ONLY)
Cuisinart®Tools & Gadgets are warranted to be free of defects in material and workmanship under normal home use from the date of original purchase
throughout the original purchaser’s lifetime. If your tool/gadget should prove to be defective within your lifetime, we will repair it (or, if we think it
necessary, replace it) without charge to you, except for shipping and handling. To obtain warranty service, please call our Consumer Service Center
toll-free at 1-800-726-0190, or write to Consumer Service Center, Cuisinart, 7475 N. Glen Harbor Blvd., Glendale, AZ 85307. To facilitate the speed and
accuracy of your return, please enclose $4.00 for shipping and handling of the product. Be sure to include a return address, description of the product
problem, phone number, and any other information pertinent to the product’s return. Please pay by check or money order made payable to Cuisinart. is
warranty excludes damage caused by accident, misuse or abuse, including damage caused by overheating, and it does not apply to scratches, stains,
discoloration or other damage to external or internal surfaces that does not impair the functional utility of the tool/gadget. is warranty also expressly
excludes all incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
foregoing limitation or exclusion may not apply to you. is warranty gives you specific legal rights, and you may also have other rights, which vary from
state to state.
CALIFORNIA RESIDENTS ONLY
California residents should call 1-800-726-0190 for shipping instructions. Cuisinart will be responsible for the cost of the repair, replacement, and
shipping and handling of such nonconforming products under warranty.
STEP 6 – Place upper
basket mat (#9) onto the
upper wire basket (#2).
Place bottom basket mat
(#8) onto bottom wire
basket (#1). Push the
basket into cabinet.
©2019 Cuisinart
East Windsor, NJ 08520
Printed in China
19CT063335 IB-16463
STEP 3 – Fold the front edge of
template (#5) along the line
between the “V” cutouts, and
place inside the cabinet with
folded edge at front edge of
cabinet.
Note the location of cabinet
door hinges and adjust the
template accordingly.
STEP 4 – Place gliders (#6)
in cutouts of template (#5).
The edges of gliders should
align with edges of cutouts.
Drill 1/8" pilot holes through
4 holes in the glider (#6).
Repeat for the opposite side.
Remove template after
drilling pilot holes. Attach
gliders (#6) to bottom of
cabinet using 5/8” screws
(#7) and screwdriver.
Max weight 70 pounds for Lower Basket
6 pounds for Upper Basket
