
15
NOTE: After using the Warm Function for the first time, the oven's Smart
Memory function will remember your last setting and revert to this rather
than the default setting. This is provided that your oven is not turned off
and unplugged at the power since last use.
• One great way to use the Dual Cook feature described below is to add Warm at
the end of a cooking function so your dish is held at the proper serving temperature
DUAL COOK
Dual Cook is a special feature that enables you to combine two cooking functions
with temperatures and timings and run them consecutively. This is ideal for those
recipes that require multiple cooking steps. Some examples are:
• Starting a casserole or a dish like nachos, use Bake to heat through and then
switch to Grill for a melted and browned cheese top.
• Beginning a dish on a higher heat to achieve a crispy crust and then reducing
temperature for tender results similar to slow cooking.
• Baking a dish then switching to the Keep Warm function to keep food ready
until serving
• Browning pork rind at a high temperature on Air Fry to produce crackling then
switching to the Roast function to complete cooking.
The functions that you may program using Dual Cook are Bake, Grill, Roast,
Pizza, Slow, Warm and Air Fry.
1. Press the Dual Cook button
2. The oven will display available functions for the first cooking cycle. Turn the
Selector Dial to desired function and press the Selector Dial to set.
3. Set temperature for this function, then press the Selector Dial. Time will now
flash. Set time, then press Selector Dial.
4. LCD screen will then show functions that can be selected for the second
stage. Repeat steps 2 and 3 to program second function, temperature
and time.
Start/Stop will flash, indicating you are able to initiate cooking cycle
5. Press Start/Stop to start cooking on the first function.
6. When the first cycle is finished, the oven will automatically switch to the
second cooking function.
7. When time reaches 0:00 and the second function cycle is completed, the oven
will beep and heating elements will turn off.
NOTE: When the oven is running in the first function, you may check your
settings for the second function by pushing the Dual Cook button. The display
will show the second function settings for a few seconds and then revert to
display for the first function.
CLEANING AND MAINTENANCE
• Always unplug the oven from the electrical outlet and allow it to cool
completely before cleaning
• The oven interior has a non-stick coating which needs to be cleaned as per
below, after every use. The slide out Crumb Tray should be checked and
cleaned after every use if required.
• Do not use abrasive cleaners, as they will damage the finish. Simply wipe the
exterior with a clean, damp cloth and dry thoroughly. Apply the cleansing agent
to a cloth, not directly onto the toaster oven, before cleaning
• To clean interior walls, use a damp cloth and a mild liquid soap solution or a
spray solution on a sponge. Remove any residue from cleaners with a clean,
damp rag. Never use harsh abrasives or corrosive products. These could
damage the oven surface. Never use steel wool pads, etc., on interior of oven
• Cleaning the accessories:
– Oven Rack and Crumb Tray should be hand-washed in hot, sudsy water, or
use a nylon scouring pad or nylon brush, and thoroughly rinsed. These items
are NOT dishwasher safe.
– Baking Tray/Drip Pan and Air Fryer Basket are stainless steel, dishwasher
safe or can be hand-washed in hot, sudsy water, or use a nylon scouring pad
or nylon brush, and thoroughly rinsed.
• After cooking greasy foods and once your oven has cooled, always clean top of
oven interior. If this is done on a regular basis, your oven will perform like new.
Removing the grease will help to keep toasting consistent, cycle after cycle
•
To remove crumbs, slide out the front Crumb Tray and discard crumbs. Wipe clean
and replace. To remove baked-on grease, soak the tray in hot, sudsy water or use
nonabrasive cleaners. Never operate the oven without the Crumb Tray in place