Curtis TXSG Series User manual
1 and 1.5 Gallon Thermal Servers
USER GUIDE
READ AND SAVE THESE INSTRUCTIONS
NOTICE TO INSTALLER: Please leave this booklet with the machine.
øøøøø #
'$594('30/5$07&3 'SFW/$
See brewer user guide for brewing instructions
1.5 gallon version shown
Style varies
Symbols
This is the safety alert symbol. It is used to alert you to potential physical injury hazards. Obey all safety
messages that follow this symbol to avoid possible injury or death.
DANGER - Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING - Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION - Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE - Indicates a situation which, if not avoided, could result in property damage.
IMPORTANT - Provides information and tips for proper operation.
SANITATION REQUIREMENTS
Important Safeguards/Conventions
WARNING:
• Keep hands, arms and other items away from hot surfaces.
• TO AVOID SCALDING, AVOID SPLASHING. Keep body parts clear of the brewer during brewing. Do
not remove the brew basket while “Brewing” appears on the display.
• Clean the dispenser completelyCFGPSFVTJOHJUGPSUIFmSTUUJNFBTBDDPSEJOHUPUIF$-&"/*/(
*/4536$5*0/4$MFBOJUSFHVMBSMZBTJOTUSVDUFEJOUIF$-&"/*/(*/4536$5*0/4%POPUVTFIBSTI
powders or cleansers containing chlorine. Do not use a wire brush or pot scour to clean inside liner
• 5IFSNBMTFSWFSTNBZCFIFBWZXIFOmMMFE5BLFDBSFXIFOUSBOTQPSUJOHUPBWPJEESPQQJOHPSTQJMMJOH
• Use this unit only for its intended use, serving hot and/or cold beverages/water.
• This dispenser is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the dispenser by a person responsible for their safety.
IMPORTANT SAFEGUARDS IS6
5)&3."-4&37&3*.1035"/54"'&(6"3%44:.#0-4 %
WARNING - This product can expose you to chemicals including Acrylamide and Bisphenol A (BPA),
which are known to the State of California to cause cancer and birth defects or other reproductive harm.
'PSNPSFJOGPSNBUJPOWJTJUXXX18BSOJOHTDBHPW
%POPUEJTQPTFPGUIF'SFTI5SBD®lids in an ordinary trash container. Contact you local municipality to
determine acceptable procedures for disposal of electronic waste.
IMPORTANT SAFEGUARDS IS6
5)&3."-4&37&3*.1035"/54"'&(6"3%44:.#0-4 %
CE Requirements
• This dispenser must be used in locations where it can be overseen by trained personnel.
• 'PSQSPQFSPQFSBUJPOUIJTEJTQFOTFSNVTUCFVTFEXIFSFUIFUFNQFSBUVSFJTCFUXFFO¡$UP¡$
• %JTQFOTFSTIBMMOPUCFUJMUFENPSFUIBO¡GPSTBGFPQFSBUJPO
• This dispenser must not be cleaned by water jet.
• 5IJTEJTQFOTFSDBOCFVTFECZQFSTPOTBHFEGSPNZFBSTBOEBCPWFJGUIFZIBWFCFFOHJWFOTVQFSWJTJPOPS
instruction concerning use of the dispenser in a safe way and if they understand the hazards involved.
• ,FFQUIFEJTQFOTFSBOEJUTDPSEPVUPGSFBDIPGDIJMESFOBHFEMFTTUIBOZFBST
• %JTQFOTFSTDBOCFVTFECZQFSTPOTZFBSTBOEBCPWFXJUISFEVDFEQIZTJDBMTFOTPSZPSNFOUBMDBQBCJMJUJFT
or lack of experience and knowledge if they have been given supervision or instruction concerning use of the
dispenser in a safe way and understand the hazards involved.
• $IJMESFOVOEFSUIFBHFPGZFBSTTIPVMECFTVQFSWJTFEUPFOTVSFUIFZEPOPUQMBZXJUIUIFEJTQFOTFS
• Dispenser must not be immersed for cleaning.
• $MFBOJOHBOEVTFSNBJOUFOBODFTIBMMOPUCFNBEFCZDIJMESFOVOMFTTUIFZBSFPMEFSUIBOZFBSTBOE
supervised.
• This dispenser is intended to be used in household and similar applications such as:
oTUBGGLJUDIFOBSFBTJOTIPQTPGmDFTBOEPUIFSXPSLJOHFOWJSPONFOUT
oCZDMJFOUTJOIPUFMTNPUFMTBOEPUIFSSFTJEFOUJBMUZQFFOWJSPONFOUT
– bed and breakfast type environments.
• This dispenser not intended to be used in applications such as:
– farm houses
• Access to the service areas permitted by Authorized Service personnel only.
• 5IF"8FJHIUFETPVOEQSFTTVSFMFWFMJTCFMPXE#"
Cleaning the 1.0 Gallon or 1.5 Gallon Thermal Dispensers (Daily)
CLEANING INSTRUCTIONS CI5
("--0/5)&3."-%*41&/4&3$-&"/*/(*/4536$5*0/4ø $
WARNING: DO NOT immerse the thermal server or its lid assembly in water or any other liquid. Do not place the
thermal server or lid in a dishwasher. Placing a thermal server in a dishwasher will void the warranty.
To avoid damage, DO NOT use a brush to clean the faucet or the inside of the faucet shank (outlet).
Cleaning the Container
1 Prepare a mild solution of detergent and warm
water. Remove the server from the brewer and
remove the lid. Rinse.
2 Wash - Wipe the exterior surfaces of the container
with a sponge soaked with the detergent solution
UPSFNPWFTQJMMTBOEEFCSJT3FNPWFUIFMJEBOEmMM
the liner with the detergent solution. Take a sponge
brush and scrub out the stainless steel liner and the
lid.
3 Rinse - Rinse with clean, warm water.
Sanitize - Sanitize the interior of the server and
the lid, using a commercial sanitizer suitable for
food grade applications. Sanitize according to the
directions on the package.
5 Disassemble the faucet - Unscrew the handle/
bonnet assembly from the top of the faucet and
remove it. Inspect the seat cup for wear. Replace
the seat cup if it is damaged.
Disassemble the sight gauge (some versions). If
the sight gauge has a cover, pull it up and off to
remove. Remove the cap to disassemble the gauge
(both versions). Some versions are equipped with a
guard that must be unscrewed to access the lower
XBTIFSBOEnPBU3FNPWFUIFHMBTTUVCF*OTQFDUJU
for cracks or chips. If broken, replace the glass with
a new one.
6 Air Dry - Turn the container and lid upside down
and allow to air dry.
Cleaning the Faucet Parts and Site Gauge
7 Wash - Wash all faucet and gauge glass parts with
the detergent solution. Using the supplied brush,
DMFBOJOTJEFUIFmMMUVCFPOUIFMJE$MFBOUIFJOTJEF
of the gauge glass with a gauge brush soaked with
detergent solution.
Rinse - Thoroughly rinse all parts with clean, warm
water.
continued....
Faucet
Assembly
TXSG Series
TLCG Series
Seat cup
Handle
Bonnet
Cap
Lid
Washer
Washer
Guard
Glass tube
Float
Faucet
Assembly
Seat cup
Handle
Cover
Lid
Bonnet
Cap
Glass tube
CLEANING INSTRUCTIONS CI5
("--0/5)&3."-%*41&/4&3$-&"/*/(*/4536$5*0/4ø $
Cleaning the Faucet Parts and Gauge Glass (cont.)
Sanitize - After rinsing, place all faucet and
gauge parts in a sink to be sanitized. Immerse
them in a commercial sanitizer suitable for food
grade applications. Sanitize according to the
directions on the package.
10 Air Dry - Allow all parts to thoroughly air dry.
11 Reassemble - When dry, reassemble the handle/
bonnet. Hand tighten the handle/bonnet onto the
top of the faucet assembly, reinstall the site gauge
and cover. If replacing a broken gauge glass,
carefully remove any traces of glass from the
silicone parts before inserting the new gauge glass
tube. Reinstall the lid.
WASH
SANITIZE
RINSE
ROUGH-IN DRAWINGS RD76
TXSG15 - Thermal Server
TXSG01 - Thermal Server
TXSG, ROUGH-IN DRAWING 040919A
ø 9.11 in
[23.2 cm]
ø 9.11 in
[23.2 cm]
22.85 in
[58.0 cm]
20.42 in
[51.9 cm]
8.89 in
[22.6 cm]
8.89 in
[22.6 cm]
14.38 in
[36.5 cm]
14.38 in
[36.5 cm]
3.38 in
[8.6 cm]
3.38 in
[8.6 cm]
7.32 in
[18.6 cm]
7.32 in
[18.6 cm]
2.04 in
[5.2 cm]
2.04 in
[5.2 cm]
9.02in
[22.9 cm]
9.02 in
[22.9 cm]
ILLUSTRATED PARTS LIST IP125
TXSG, ILLUSTRATED PARTS/RECOMMENDED PARTS 040819C
3
4
6
9
12
27
28B
13B
22
23
22
24
29
33
15B
31B
15A
31A
20B
20A
30
21
13A
18
17
16
7
10
11
1
26
TXSG - Exploded View
A
A
14A
14B
25
32
28A
5A
5B
5C
8A
8B
2A
2B
Orange, decaf.
handle
19A
19B
ILLUSTRATED PARTS LIST IP125
TXSG, ILLUSTRATED PARTS/RECOMMENDED PARTS 040819C
ITEM # PART # DESCRIPTION
1* WC-56024-102 CAP, RUBBER FOR LARGE FUNNEL ASSY
TXSG01, TXSG15
2A** WC-56025-101 LID ASSEMBLY WITH LARGE FUNNEL TXSG15
2B** WC-56024-101 LID ASSEMBLY WITH LARGE FUNNEL TXSG01
3 WC-1949 CAP, SHIELD WITH VENT, PLASTIC
4 WC-2005 WASHER, SHIELD CAP 1/8” GEM-3/TC’S W/SG
5A WC-2027 GLASS, GAUGE 10” (TXSG15)
5B WC-2025 GLASS, GAUGE 8” (TXSG01)
5C WC-37396 KIT, GLASS GAUGE 10” 3PK FITS TXSG15 SERVER
6 WC-56028 TOP SERVER THREADED BLACK TXSG
7 WC-2063K BRACKET, GAUGE GLASS RING & SC CREW FITS
SHANGHAI SOLID SRVR
8A WC-2012-101 SHIELD, GAUGE GLASS 10” BLACK ANODIZED
(TXSG15)
8B WC-2010-101 SHIELD, GAUGE GLASS 3/4”D.X 8” BLACK
ANODIZE (TXSG01)
9 WC-56030 BOTTOM, PLASTIC BLK SERVR TXSG
10 WC-32004 BALL, PLASTIC RESTRICTOR TXS SERVERS
11 WC-2006 WASHER, .188 ID X .188 THK BOTTOM GAUGE
GLASS GEN USE
12 WC-1951 NUT, FLANGED, PLASTIC
13A WC-1938-103K KIT, SHANK, NUT & INSTRUCTIONS TXSG 1GAL.
& 1.5GAL
13B WC-1938 SHANK, PLASTIC CAP-T2 (OLDER UNITS)
14A WC-1803 FAUCET, “SPB” SERIES,BLACK HANDLE/PLATIC
1-1/32-14 UNS CURT
14B WC-1803D FAUCET ASSY DECAF HANDLE PLASTIC 1-1/32-14
UNS CURTIS
15A WC-66119K-TXSG KIT, FAUCET GUARD TXSG (NEWER UNITS,
INCLUDES SCREWS)
15B WC-64079 GUARD, FAUCET TXSG CAST ZINC (OLDER
UNITS)
16 WC-1906 “C” RING .917 X .760 X .090 TT-3 TC’S
ITEM # PART # DESCRIPTION
17 WC-1905 NUT, WING PLASTIC 1-1/32-14UNF (TC-2,3,5,10)
18 WC-4320 O’RING, 0.487I.D.x 0.693OD x0.103CS BUNA-N #112
19A WC-3705 KIT, FAUCET HANDLE S SERIES NONLOCK
19B WC-3705D KIT, FAUCET S SERIES DECAF NON LOCK USE ON
WC-1800D
20A WC-56020 BASE ASSEMBLY SERVER 1 GAL & 1 1/2 GAL
STRAIGHT SIDE
20B WC-56013 BASE ASSEMBLY, SERVER TLXG15 TSS1/TSS2
(OPTIONAL)
21 WC-61689 KIT, DRIP TRAY STRAIGHT SIDE SERVER
22 WC-43091 CLAMP, WIRE HOSE TXSG01/TXSG15
23 WC-2456 ELBOW, SILICONE STRAIGHT SIDED SERVER
TXSG01/TXSG15
24 WC-4281 NUT, 1/2”-14 NPSM PLASTIC
25 WC-58262 COVER, BOTTOM WHITE PLASTIC TXS TXSG01/
TXSG15
26 WC-37395 KIT, GAUGE GLASS ASSY 10” BLK STRAIGHT SIDE
SERVER 1.5 GAL
27 WC-2004-101 SHIELD, BASE GAUGE GLASS BLACK CHROME
(OLDER UNITS)
28A WC-29082 FITTING, 1/2”-14 NPSM STAINLESS STEEL WB5GT
(OLDER UNITS)
28B WC-29082K KIT, FITTING W/ SILICONE WASHER FOR TXS
SERVERS (OLDER UNITS)
29 WC-36076 BRUSH, GAUGE GLASS MILANO SERVER
30 WC-38281 LABEL, DECAF TLXG02
31A WC-4872-25 SCREW, M4 X 25MM PHIL PAN HD BLACK-OXIDE
18-8 SS (NEWER UNITS)
31B WC-4872 SCREW, METRIC PAN HD PHIL MACH BLK-OXIDE
18-8 SS, M4, 16mm LG (OLDER UNITS)
32 WC-1805 SEAT CUP, “S” FAUCET USE ON WC-1800/B/LB/D/
DL/L/WC-1803
33 WC-32005ORG HANDLE, FAUCET STYLIZED ORG CURTIS
TXSG - Main Chassis - Parts List
All parts are common between the 1 gallon and 1.5 gallon servers, except where indicated by “TXSG15” and “TXSG01”.
* If server is equipped with a screw-on type cap, replace entire lid assembly (Item 2A or 2B).
** Compatible with older versions.
PRODUCT WARRANTY PW1
:LOEXU&XUWLV&R,QFFHUWL¿HVWKDWLWVSURGXFWVDUHIUHHIURPGHIHFWVLQPDWHULDODQGZRUNPDQVKLSXQGHUQRUPDOXVH7KHIROORZLQJOLPLWHG
ZDUUDQWLHVDQGFRQGLWLRQVDSSO\
3years, parts and labor, from original date of purchase on digital control boards
2\HDUVSDUWVIURPRULJLQDOGDWHRISXUFKDVHRQDOORWKHUHOHFWULFDOFRPSRQHQWV¿WWLQJVDQGWXELQJ
1\HDUODERUIURPRULJLQDOGDWHRISXUFKDVHRQDOORWKHUHOHFWULFDOFRPSRQHQWV¿WWLQJVDQGWXELQJ
$GGLWLRQDOO\:LOEXU&XUWLV&R,QFZDUUDQWVLWVJULQGLQJEXUUVIRUIRUW\PRQWKVIURPWKHGDWHRISXUFKDVHRUSRXQGVRIFRIIHHZKLFKHYHU
FRPHV¿UVW6WDLQOHVVVWHHOFRPSRQHQWVDUHZDUUDQWHGIRUWZR\HDUVIURPWKHGDWHRISXUFKDVHDJDLQVWOHDNLQJRUSLWWLQJ5HSODFHPHQWSDUWV
DUHZDUUDQWHGIRUQLQHW\GD\VIURPWKHGDWHRISXUFKDVHRUIRUWKHUHPDLQGHURIWKHOLPLWHGZDUUDQW\SHULRGRIWKHHTXLSPHQWLQZKLFKWKH
FRPSRQHQWLVLQVWDOOHG
$OOLQZDUUDQW\VHUYLFHFDOOVPXVWKDYHSULRUDXWKRUL]DWLRQ)RUDXWKRUL]DWLRQFDOOWKH7HFKQLFDO6XSSRUW'HSDUWPHQWDW
$GGLWLRQDOFRQGLWLRQVPD\DSSO\*RWRZZZZLOEXUFXUWLVFRPWRYLHZWKHIXOOSURGXFWZDUUDQW\LQIRUPDWLRQ
CONDITIONS & EXCEPTIONS
7KHZDUUDQW\FRYHUVRULJLQDOHTXLSPHQWDWWLPHRISXUFKDVHRQO\:LOEXU&XUWLV&R,QFDVVXPHVQRUHVSRQVLELOLW\IRUVXEVWLWXWHUHSODFHPHQW
SDUWVLQVWDOOHGRQ&XUWLVHTXLSPHQWWKDWKDYHQRWEHHQSXUFKDVHGIURP:LOEXU&XUWLV&R,QF:LOEXU&XUWLV&R,QFZLOOQRWDFFHSWDQ\
UHVSRQVLELOLW\LIWKHIROORZLQJFRQGLWLRQVDUHQRWPHW7KHZDUUDQW\GRHVQRWFRYHU
• Adjustments and cleaning: The resetting of safety thermostats and circuit breakers, programming and temperature adjustments are the
responsibility of the equipment owner. The owner is responsible for proper cleaning and regular maintenance of this equipment.
• Replacement of items subject to normal use and wear: This shall include, but is not limited to, spray heads, faucets, light bulbs, shear
disks, “O” rings, gaskets, silicone tubing, silicone elbows, canister assemblies, whipper chambers and plates, mixing bowls, agitation
assemblies and whipper propellers.
7KHZDUUDQW\LVYRLGXQGHUWKHIROORZLQJFLUFXPVWDQFHV
• Improper operation of equipment: The equipment must be used for its designed and intended purpose and function.
• Improper installation of equipment: This equipment must be installed by a professional technician and must comply with all local elec-
trical, mechanical and plumbing codes.
• Improper voltage: Equipment must be installed at the voltage stated on the serial plate supplied with this equipment.
• Improper water supply: 7KLVLQFOXGHVEXWLVQRWOLPLWHGWRH[FHVVLYHRUORZZDWHUSUHVVXUHDQGLQDGHTXDWHRUÀXFWXDWLQJZDWHUÀRZUDWH
• Damaged in transit: Equipment damaged in transit is the responsibility of the freight company and a claim should be made with the carrier.
• Abuse or neglect (including failure to periodically clean or remove lime accumulations): The manufacturer is not responsible for
variation in equipment operation due to excessive lime or local water conditions. The equipment must be maintained according to the
manufacturer’s recommendations.
Repairs and/or Replacements DUHVXEMHFWWR&XUWLV¶GHFLVLRQWKDWWKHZRUNPDQVKLSRUSDUWVZHUHIDXOW\DQGWKHGHIHFWVVKRZHGXSXQGHU
QRUPDOXVH$OOODERUVKDOOEHSHUIRUPHGGXULQJUHJXODUZRUNLQJKRXUV2YHUWLPHFKDUJHVDUHWKHUHVSRQVLELOLW\RIWKHRZQHU&KDUJHVLQFXUUHG
E\GHOD\VZDLWLQJWLPHRURSHUDWLQJUHVWULFWLRQVWKDWKLQGHUWKHVHUYLFHWHFKQLFLDQ¶VDELOLW\WRSHUIRUPVHUYLFHLVWKHUHVSRQVLELOLW\RIWKHRZQHURI
WKHHTXLSPHQW7KLVLQFOXGHVLQVWLWXWLRQDODQGFRUUHFWLRQDOIDFLOLWLHV:LOEXU&XUWLV&R,QFZLOODOORZXSWRPLOHVURXQGWULSSHULQZDUUDQW\
VHUYLFHFDOO
Return Merchandise Authorization (RMA):$OOFODLPVXQGHUWKLVZDUUDQW\PXVWEHVXEPLWWHGWRWKH:LOEXU&XUWLV7HFKQLFDO6XSSRUW'HSDUWPHQW
SULRUWRSHUIRUPLQJDQ\UHSDLUZRUNRUUHWXUQRIWKLVHTXLSPHQWWRWKHIDFWRU\All returned equipment must be properly re-packaged in the
original carton and received by Curtis within 45 days following the issuance of a RMA.1RXQLWVZLOOEHDFFHSWHGLIWKH\DUHGDPDJHGLQ
WUDQVLWGXHWRLPSURSHUSDFNDJLQJNO UNITS OR PARTS WILL BE ACCEPTED WITHOUT A RETURN MERCHANDISE AUTHORIZATION
(RMA). THE RMA NUMBER MUST BE MARKED ON THE CARTON OR SHIPPING LABEL. All warranty claims must be submitted within
60 days of service. Invoices will not be processed or accepted without a RMA number. Any defective parts must be returned in order
for warranty invoices to be processed and approved. $OOLQZDUUDQW\VHUYLFHFDOOVPXVWEHSHUIRUPHGE\DQDXWKRUL]HGVHUYLFHDJHQW&DOO
WKH:LOEXU&XUWLV7HFKQLFDO6XSSRUW'HSDUWPHQWWR¿QGDQDJHQWQHDU\RX
130%6$58"33"/5:ø #
This manual suits for next models
2
Table of contents
