Cuz-D 8.5 User manual
Straight Flush Saw
User's Manual
Model 8.5
INDUSTRIES
Practicing safety is very important. Read this entire manual
before use and check in on our website for further safety
information and other tips and tricks for using this power tool.
Power saws by their nature can be dangerous always use
proper safety gear and do not allow the saw blade to contact
your skin or clothing.
This saw is designed for use by Professionals Only
Do not use this saw without proper knowledge and safety
resources
BLE OF CONTENTS
35
Personal Safety
4
Work Area Safety
Electrical Safety
5
POWERTOOLUSEANDCARE
Service
6
ADDITIONAL SAFETY RNINGS
A RNING
SAFETY FOR CIRCULAR SAWS
RNING
7
CUTTING PROCEDURES
DANGER
8
Kickback definition and related warnings
v
9
FUNCTIONAL DESCRIPTION
GURE 7. Stight ush Saw
Maximum Capacities
°
°
°
10
Technical Specifications
MSRP Description
STRAIGHT FLUSH S SAFETY
PRECAUTIONS AND COMMON PROCEDURES
A WARNING
A DANGER
11
A RNING
12
Trigger Actuated Lower Guard
The lower guard trigger is only to be used with plunge cuts,
compound cuts and cuts requiring zero clearance. The lower
guard should automatically retract with all other cuts as the
blade enters the material. The trigger actuated lower guard
is designed to keep hands away from the blade and to allow
the user to easily retract the guard for starting cuts.
c.
13
Base Extension Plate
14
Rotating Handle
6.
-6
15
ASSEMBLY /CONFIGURATION
RNING
Preventative
safety measures reduce the risk of accidental starting.
Dust Cover Removal
To remove, unlock the catch by
rotating it until arrow points to the unlocked symbol as
indicated below. Disconnect magnet holding the bottom
assemblies, depress the quick disconnect tabs and gently
pull cover away from saw body.
LOC OC
16
Blade tachment/Removal
7
2) (blade arbor
bolt) arbor bolt
arbor cap.
lower guard spring cable pulley
lower guard actuator
switch
4) Only use specified blades for the tool
17
°
OPERATING INSTRUCTIONS
Depth Adjustment
L
H 1•
' -,
,_ . --
.[
'. �
Bevel Adjustment
° °
18
7
90 Degree Cutting Angle Check
Disconnect the tool from power source.
°°
Guide Line
Control Switch
7
19
Making General Cuts
RNING
RNING
Plunge Cuts
20
Table of contents
