Cybernet ZPC-H6 series User manual

ZPC-H6 Series
User Guide

i
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with
the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
measures listed below.
•Reorient or relocate the receiving antenna.
•Increase the distance between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/television technician for help.
Notice 1 The changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
Notice 2 Shielded interface cables and A.C. power cord, if any, must be used in order
to comply with the emission limits.
Trademarks
All trademarks are the properties of their respective owners.
Intel®, Atom™ and CedarView® are registered trademarks of Intel Corporation.
PS/2 and OS®/2 are registered trademarks of International Business Machines
Corporation.Windows® 7/Vista/XP/NT/2000/98/95 are registered trademarks of Microsoft
Corporation. Netware® is a registered trademark of Novell, Inc. Award® is a registered
trademark of Phoenix Technologies Ltd. AMI® is a registered trademark of American
Megatrends Inc

ii
Safety Instructions
1. Always read the safety instructions
carefully.
2. Keep this equipment away from humidity.
3. Lay this equipment on a reliable flat surface before setting it up.
4. The openings on the enclosure are for air convection hence protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
5. Confirm the voltage of the power source and adjust accordingly to 110/220V
before connecting the equipment to the power inlet.
6. Place the power cord in such a way that it cannot be stepped on. Do not
place anything over the power cord.
7. Always unplug the Power Cord before inserting any add-on card or module.
8. All cautions and warnings on the equipment should be noted.
9. Never pour any liquid into the opening. This will cause damage and/or electrical
shock.
10. Do not disable the protective grounding pin from the plug. The equipment must be
connected to a grounded main socket/outlet.
11. The Optical Storage devices are classified as Class 1 Laser products. Use of
controls or adjustments or performance of procedures other than those specified is
prohibited.
12. Do not touch the Laser lens inside the optical storage drive.
13. If any of the following situations arise, have the equipment checked by authorized
service personnel:
•The power cord or plug is damaged.
•Liquid has penetrated into the equipment.
•The equipment has been exposed to moisture.
•The equipment has not worked well or you cannot get it working according to
the User's Guide.
•The equipment has been dropped and damaged.
•The equipment has obvious signs of breakage.
DO NOT LEAVE THIS EQUIPMENT IN AN UNCONDITIONED ENVIRONMENT WITH A
STORAGE TEMPERATURE ABOVE 50° C (122°F). IT MAY DAMAGE THE
EQUIPMENT.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer.

iii
WEEE Statement
(Waste Electrical and Electronic Equipment)
The WEEE directive places an obligation on EU-based manufacturers, distributors,
retailers and importers to take-back electronics products at the end of their useful life. A
sister Directive, ROHS (Restriction of Hazardous Substances) compliments the WEEE
Directive by banning the presence of specific hazardous substances in the products at the
design phase. TheWEEE Directive covers products imported into the EU as of August 13,
2005. EU-based manufacturers, distributors, retailers and importers are obliged to finance
the costs of recovery from municipal collection points, reuse, and recycling of specified
percentages per the WEEE requirements.
Instructions for disposal of WEEE by Users in the European Union
The symbol shown below is on the product or on its packaging, which indicates that this
product must not be disposed of with other waste. Instead, it is the user’s responsibility to
dispose of their waste equipment by handing it over to a designated collection point for the
recycling of waste electrical and electronic equipment. The separate collection and
recycling of your waste equipment at the time of disposal will help to conserve natural
resources and ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your waste equipment
for recycling, please contact your local city office, your household waste disposal service
or where you purchased the product.

iv
TABLE OF CONTENTS
FCC-B Radio Frequency Interference Statement ........................................................i
Trademarks.....................................................................................................................i
Safety Instructions........................................................................................................ii
WEEE Statement ..........................................................................................................iii
Introduction...................................................................................................................1
ZPC-H6 Series Specifications ......................................................................................1
Processor Support ................................................................................................................1
Chipset ...................................................................................................................................1
Memory Support ....................................................................................................................1
Networking.............................................................................................................................1
Audio ......................................................................................................................................1
Hard Disk Drive......................................................................................................................1
Expansion Slots.....................................................................................................................1
Right Side of System.............................................................................................................1
Left side of System…………………………………………………………………………………….1
Inside of System ...................................................................................................................2
Back I/O ports ........................................................................................................................2
Power Supply.........................................................................................................................2
Dimensions ............................................................................................................................2
ZPC-H6 Series Overview...............................................................................................3
Basic operation......................................................................................................................8
Using the AC adapter ............................................................................................................8
Card reader ............................................................................................................................5
Wireless................................................................................................................................15
System Assembly..........................................................................................................9
Necessary Tools....................................................................................................................9
Orientation of Key Parts......................................................................................................10
ZPC-H6 Disassembly...........................................................................................................11
Installing the Memory Module DDR3 SO-DIMM .................................................................12
Installing the Hard Disk Drive .............................................................................................14
Installing the Mini-PCIe Card (Optional).............................................................................15
Installing the Optical Drive (Optional)................................................................................16
All System View…………………………………………………………………………………........17

v
Cybernet Recycling SOP…………………………………………………………………………….18
Figures
Figure 1: Top View with Optical Drive.........................................................................3
Figure 2: Right side view with Optical Drive...............................................................4
Figure 3: Right side top view with Optical Drive ........................................................4
Figure 4: Left view and connectors function..............................................................5
Figure 5: Back view and connectors function............................................................6
Figure 6: Bottom view ………………….………………………………..…….………….....5
Figure 7: CPU Heat Sink Ventilation Fan...... ……………………………………………..7
Figure 8: Top view power button and LEDs................................................................7
Figure 9: Orientation of Key Parts.............................................................................10

Cybernet ZPC-H6 User Guide
Page 2
Introduction
Congratulations for purchasing the ZPC-H6. The ZPC-H6 Series is your best Keyboard
PC choice. With the fantastic appearance and small form factor, it can easily be set
anywhere. The feature packed platform also gives you an exciting PC experience.
ZPC-H6 Series Specifications
Processor Support
2nd generation Intel® Core™ i5/i3/Pentium/Celeron, 5 GT/s System Bus, 1155-pin
socket up to 45W. Intel® Sandy Bridge Processor.
Chipset
Intel® H61 Express Chipset
Memory Support
2 x DDR3 1066/1333 MHz SO-DIMM sockets, populated up to 8GB Max.
Video & Graphics
Intel® integrated H61 Chipset with Intel® HD Graphics
Intel GMA HD/Intel Clear Video HD Technology
Built-in support for 1080p HD video playback, HDMI 1.4 & Blu-ray 3D support
Supports Microsoft®DirectX 10.1/DirectX 11, Shader Model 4.0 and OpenGL 3.0.
DVMT allocated as needed from 128MB to 1.70GB
Maximum display resolution 2560 x 1600.
Networking
Support 1 x 10/100/1000 Fast Ethernet by Realtek RTL8111E.
Audio
2 internal speakers @ 1.5W, 1 mic.
HD Audio Codec Realtek® ALC661
Hard Disk Drive
One 2.5” SATA Hard Disk Drive - 500GB/320GB/250GB/160GB or SSD.

Cybernet ZPC-H6 User Guide
Page 3
Expansion Slots
Two Mini PCI-e (1xFull-size and 1xHalf-size)
Right Side of System
1 optical disk drive – 2.5” slim
Left Side of System
1 USB 2.0 ports.
1 MMC,SD,MS/PRO slot Inside of System
2 x Mini-PCIe slot.
1 x DDR3 slot.
Back I/O Ports
1 DC/IN port
1 HDMI
1 Video(D-Sub) port
1 LAN RJ-45 jack
2 USB 2.0 ports
2 USB 3.0 ports
1 COM port
1 Audio Jack (Line-out & MIC at rear)
1 S/PDIF Connector
1 Security lock slot
1 TV-Tuner Port (Optional) with 1*RCA Jack + Coax cable
Power Supply
120 Watt Power Adapter, AC Input: 100~240V AC, 1A, 50-60Hz
DC Output: 19V, 6.32A
Dimensions
46.5cm x 19.5cm x 35cm (W x D x H)

Cybernet ZPC-H6 User Guide
Page 3
ZPC-H6 Series Overview
Figure 1: Top View with Optical Disk Drive
1 2 3
No.
Item
detail
1
LED indicators
As follows” LED state indicators”
2
Keyboard
Standard 101 key USA Keyboard
3
Optical Drive
DVD-RW

Cybernet ZPC-H6 User Guide
Page 4
Figure 2: Right side view with Optical Drive
1 2 3
NO.
Item
Detail
1
DVD driver
Different computer models are equipped according to different
drives. DVD drive supports CD or DVD discs and have burned (R) or
repeated burning (RW) capabilities.
2
DVD
indicators
This indicator lights when the DVD drive is running.
3
Open key
(DVD)
Stop the DVD drive and open the drive tray.
Figure 3: Right side Top view with Optical Drive