CytoLED Pentaplex User manual

CytoLED Pentaplex
Stand Assembly
Manual
Components &
Assembly Instructions
Generation 3 Manual - Version 1.0
SOCIAL:
IG: @cytoledmedia
FB: @cytoledmedia
SITE:
CytoLED.com
CONTACT :
Email: [email protected]om

CYTOLED PENTAPLEX STAND ASSEMBLY MANUAL
Welcome to the
CytoLED Pentaplex
Stand Assembly Manual
INTRODUCTION
Thanks for choosing CytoLED! We've created this
digital manual as a companion to your stand to
ensure you understand all that it can do and so that
you can get it set up quickly and safely. We chose to
go digital with this Assembly Manual so that it can
be updated over time, you'll always have the latest
version at hand, and it avoids any waste.
WARNINGS
-Make sure you have read the instructions and ful-
ly understand how to install before installation, if
there's something you don't understand about any of
the installation steps, please contact us.
-This product contains some small parts. If swallowed
accidentally, there will be a risk of suffocation. Keep
these small parts away from children.
-This product is only intended to be used indoors. If
used outdoors, it may cause damage to the product
or personal injury.

CYTOLED PENTAPLEX STAND ASSEMBLY MANUAL
Table of Contents
ACCESSORIES LIST ................................................... 4
ASSEMBLY INSTRUCTIONS..................................5-10

PAGE 4 CYTOLED PENTAPLEX STAND ASSEMBLY MANUAL
Accessories List
ID Description Pattern Quantity
AScrew M8*35
Lock Nut M8
Allen wrench
Small wrench
8
8
1
2
BScrew M8*35
Fixed piece
2
1
CScrew M8*16
Holder
2
1
DScrew M8*45
Lock nut M8
4
4
EScrew M8*12
Knob nut M8
2
2
FPull pin knob screw 1
GScrew M5*55 2
HFix the Pentaplex screw
M8*16mm 4
Note: The lock nut has a self-tightening function and will require the included tools
to properly screw into place, this may require some additional force compared to the
other nuts.

PAGE 5 CYTOLED PENTAPLEX STAND ASSEMBLY MANUAL
1.
The first step is to assemble the stand's base in an upside-down position, and connect
the brake wheels.
A: Lock nut M8*4
The front edge of the base with
screw holes is facing backward
A: M8*35mm*4
Assembly Instructions
2
1

PAGE 6 CYTOLED PENTAPLEX STAND ASSEMBLY MANUAL
Assembly Instructions
2.
Insert the lower column into the groove of the assembled base. Fix the tube to the
base with screws and fittings.
Lower column
Back
C: Fixer*1
M8*16mm*2
The long legs face the front
B: Fixed piece *1
M8*35mm*2

PAGE 7 CYTOLED PENTAPLEX STAND ASSEMBLY MANUAL
Assembly Instructions
3.
Align the upper column with the lower column slot and insert and fix it.
Adjust the hole position
F: Pull pin knob screw*1

PAGE 8 CYTOLED PENTAPLEX STAND ASSEMBLY MANUAL
Assembly Instructions
4.
Install the Pentaplex hanging plate.
F: Pull pin knob screw*1
Hanging plate
7-shaped support frame
4.1 D: M8*45mm*4
Lock nut M8*4

PAGE 9 CYTOLED PENTAPLEX STAND ASSEMBLY MANUAL
Assembly Instructions
5.
Connect the hook to the screwhole on the back of the Pentaplex.
H: Fix the Pentaplex screw
M8*16mm*4
E: M8*12mm*2
Knob nut*2
M8*16mm*4

PAGE 10 CYTOLED PENTAPLEX STAND ASSEMBLY MANUAL
Assembly Instructions
6.
Hang the Pentaplex with the hook connected with the hook connected to the hanging
plate. Tighten the screws under the hook.
Hanging plate
G: M5*55mm*2

ANY QUESTIONS LEFT?
We hope the CytoLED Pentaplex Stand Assembly Manual has been informative but if
anything remains unclear, please feel free to email us: [e-mail]
The information provided in the CytoLED Pentaplex Stand Assembly Manual is not in-
tended to diagnose, treat, cure, or prevent any disease. The information in the CytoLED
Pentaplex Stand Assembly Manual has not been evaluated by the FDA or any other
medical body. For any medical issue, we recommend seeking out a qualified medical
professional. We do not accept any responsibility for complications resulting from use
or misuse of any of our products. © 2021 CytoLED All Rights Reserved