D-Link DIR-505 Manual

-1-
FAQ : How To Manually Configure Repeater Mode on DIR-505 - Version 1.00
Technical Support Setup Procedure
FAQ : How To Manually Configure Repeater Mode on DIR-505
Release date : 24/07/2012
Model Support : DIR-505
H/W:A1
S/W:1.03

-2-
FAQ : How To Manually Configure Repeater Mode on DIR-505 - Version 1.00
Technical Support Setup Procedure
Manual  Repeater Mode DIR-505 
Note : SharePort DIR-505 
Access Point
1:DIR-505 Repeater 
LED 
Switch to Repeater mode
Green LED

-3-
FAQ : How To Manually Configure Repeater Mode on DIR-505 - Version 1.00
2 : DIR-505  (
LAN) IP Address manual DIR-505
Repeater Mode.
Note : IP Address DIR-505 192.168.0.1
3:http://192.168.0.1 
DIR-505

Log In

-4-
FAQ : How To Manually Configure Repeater Mode on DIR-505 - Version 1.00
4:SETUP > WIRELESS SETUP  Enable Wireless
Site Survey
5:Connect

-5-
FAQ : How To Manually Configure Repeater Mode on DIR-505 - Version 1.00
6: Wireless Network Settings 
Save Settings 
DIR-505 

-6-
FAQ : How To Manually Configure Repeater Mode on DIR-505 - Version 1.00
7:
1. 2 IP Address 2
2.  (LAN) 
DIR-505


-7-
FAQ : How To Manually Configure Repeater Mode on DIR-505 - Version 1.00
Technical Support Setup Procedure
How To Manually Configure Repeater Mode on DIR-505
Note: SharePort Function is not available when DIR-505 is in
Repeater Mode
Step 1: Make sure the hardware switch on the DIR-505 is under ‘Repeater’ mode. Wait for the LED
light to turn green before accessing the router.
Switch to Repeater mode
Green LED

-8-
FAQ : How To Manually Configure Repeater Mode on DIR-505 - Version 1.00
Step 2: Please connect your PC to DIR-505 via Ethernet cable. Configure manual ip address in your
PC in order to access DIR-505 in Repeater mode.
Note: The default IP Address of DIR-505 is 192.168.0.1.
Step 3: Open web browser on your PC, type in the ip address of DIR-505 - http://192.168.0.1 to
enter the DIR-505 configuration page.
Default password is blank. Please enter your password if you have changed it. Click Log In.

-9-
FAQ : How To Manually Configure Repeater Mode on DIR-505 - Version 1.00
Step 4: Go to SETUP>WIRELESS SETUP. Make sure ‘Enable Wireless’ checkbox is checked. Click
on ‘Site Survey’ button to scan for your main router wireless network.
Step 5: Select your main router wireless network name and click Connect.

-10-
FAQ : How To Manually Configure Repeater Mode on DIR-505 - Version 1.00
Step 6: It will back to the Wireless Network Settings page. Please scroll down and type in your main
router’s wireless network pre-shared key. Click Save Settings on top. The DIR-505 will reboot.