D-Link DIR-506L User manual

CONFIGURATION GUIDE
For DIR 506L Mobile Companion
www.dlink.co.in

Configuration Guide
For DIR 506L
Mobile Companion
Product Highlights
ROUTER SETUP
1
WI-FI HOTSPOT MODE
2
REPEATER MODE
3
ACCESS POINT MODE
4
3G - 4G MODE
5
SHAREPORT ACCESS
6
Share any Internet connection
wirelessly
Share your 3G/4G dongle internet
connection wirelessly.
Stream Media to All of your Devices.
Repeat your existing wireless network.
True Portability

ROUTER SETUP
1
From your laptop, go to wireless utility to
display available wireless networks and
select the Wi-Fi name of device to
connect. (By default Wi-Fi name is
dlink_DIR-506L ) In default settings there
is no password for the wireless.
1.

Once you are connected to Device
through Wi-Fi, Open your web browser,
and type http://192.168.0.1 in the
address bar to begin the Setup Wizard.
2.
Follow the on-screen instruction to
complete the setup
3.
Click Next to continue.4.
Choose the operation mode in which
you want to configure the router.
We will show you Router Mode
configuration.
5.
ROUTER SETUP
1

Select the type of connection which your
ISP has given you. Most cable modem
connections use DHCP and most DSL
modem connections use PPPoE.
Once you put the required information
click Next and it will take you to
wireless settings.
Note: If you are not sure which connection
type you use or what settings to enter,
contact your Internet service provider.
6.
You can change the wireless network
name (SSID) as per your choice.
7.
To protect your wireless network from
unauthorized access, enable the wireless
security and assign the wireless password
for your network and click Next.
8.
It will show you the Setup Summary, click
on the Save button to save your
configuration. Router will reboot to
activate the new settings and you will be
disconnected form the router. After
Reboot, use the new settings you created
to reconnect to the Router.
9.
ROUTER SETUP
1

Connect to the router wirelessly and
login into it from web browser as already
shown in step 1 and 2 in router
configuration and follow the on-screen
instruction to complete the setup.
1.
Click Next to continue.
Select the Wi-Fi Hotspot Mode and
click Next.
2.
It will show you the available wireless
networks, select the Wi-Fi hotspot to
connect to the internet with and
press select.
3.
Put the Wi-Fi password of the
network to which you are connecting
and click Next.
4.

Now, configure your Wireless LAN settings,
you can change your wireless network
name (SSID) and can secure your wireless
network by enabling the wireless security
and assigning password for your wireless.
Click Next once settings are over.
5.
Next screen It will show you the Setup
Summary, click on the Save button to save
your configuration. Router will reboot to
activate the new settings and you will be
disconnected form the router. After
Reboot, use the new settings you created
to reconnect to the Router.
6.
WI-FI HOTSPOT MODE
2

Connect to the router wirelessly and login
into it from web browser as already shown
in step 1 and 2 in router conguration and
follow the on-screen instruction to
complete the setup.
1.
Select Repeater mode and click Next.
Click Next to continue.
2.
It will show you the available wireless
networks in your environment. Select the
wireless network which you want to
connect and click Select.
3.
Put the Wi-Fi password of the network to
which you are connecting and click Next.
4.
REPEATER MODE
3

Now, configure your Wireless LAN settings,
you can change your wireless network
name (SSID) and can secure your wireless
network by enabling the wireless security
and assigning password for your wireless.
Click Next once settings are over.
5.
Next screen It will show you the Setup
Summary, click on the Save button to save
your configuration. Router will reboot to
activate the new settings and you will be
disconnected form the router. After
Reboot, use the new settings you created
to reconnect to the Router.
6.
REPEATER MODE
3

Connect to the router wirelessly and
login into it from web browser as already
shown in step 1 and 2 in router
conguration and follow the on-screen
instruction to complete the setup.
Click Next to continue.
1.
Select AP Mode and click Next to continue.2.
Next screen It will show you the Setup
Summary, click on the Save button to save
your configuration. Router will reboot to
activate the new settings and you will be
disconnected form the router. After
Reboot, use the new settings you created
to reconnect to the Router.
4.
Now on next screen configure your
wireless settings. You can change the
wireless network name (SSID) as per your
choice, also you can secure your wireless
network from unauthorised access by
enabling the wireless security and by
assigning the wireless password. Once
configuration is done click on Next button.
3.
ACCESS POINT MODE
4