D-Link DSL-2640U User manual

Quick Installation Guide
DSL-2640U
Wireless ADSL2+ Router with Ethernet WAN Support

DSL-2640U Quick Installation Guide
BEFORE YOU BEGI
Delivery Package
•Router DSL-2640U
•Power adapter DC 12V/0.5A
•RJ-11 telepho e cable
•Straight-through Ether et cable (CAT 5E)
•Splitter
•“Quick Installation Guide” (brochure).
If a y of the items are missi g, please co tact your reseller.
The “User Manual” a d “Quick Installation Guide” docume ts are available
o D-Li k website (see www.dli k.ru, DSL-2640U/RA/U1 product page, the
dow loads tab).
!Using a power supply with a different oltage rating than the one
included will cause damage and oid the warranty for this product.
Default Settings
IP address of wireless router 192.168.1.1
Username (login) admin
Password admin
ame of wireless network (SSID) DSL-2640U
etwork key (PSK)
see WPS PIN o the
barcode label o the
bottom pa el of the
device
2

DSL-2640U Quick Installation Guide
System Requirements and Equipment
•A computer with a y operati g system that supports a web browser.
•A web browser to access the web-based i terface of the router:
◦Apple Safari 5 a d later
◦Google Chrome 5 a d later
◦Microsoft I ter et Explorer 8 a d later
◦Mozilla Firefox 5 a d later
◦Opera 10 a d later.
•A NIC (Ether et or Wi-Fi adapter) to co ect to the router.
•A 802.11b, g, or Wi-Fi adapter to create a wireless etwork.
3

DSL-2640U Quick Installation Guide
CO ECTI G TO PC
PC with Ethernet Adapter
1. Make sure that your PC is powered off.
2. Co ect a Ether et cable betwee a y of four Ether et ports located o
the back pa el of the router a d the Ether et port of your PC.
3. To connect the router to a DSL line: co ect a pho e cable betwee the
DSL port of the router a d the ADSL OUT port of the splitter. Co ect
your pho e to the PHONE port of the splitter. The co ect a other
pho e cable betwee a pho e jack a d the ADSL IN port of the splitter.
4. To connect the router to an Ethernet line: i the web-based i terface of
the router, select the router's LAN port that will be used as the WAN port
a d create a Ether et WAN co ectio . The co ect the Ether et cable
betwee the selected Ether et port located o the back pa el of the router
a d the Ether et li e.
5. Co ect the power cord to the power co ector port o the back pa el of
the router, the plug the power adapter i to a electrical outlet or power
strip.
6. Tur o the router by pressi g the ON/OFF butto o its back pa el.
7. Tur o your PC a d wait u til your operati g system is completely
loaded.
Now you should co figure your PC to obtai a IP address automatically (as
DHCP clie t).
4

DSL-2640U Quick Installation Guide
Obtaining P Address Automatically
in OS Windows XP
1. Click the Start butto a d proceed to the Control Panel > etwork
and Internet Connections > etwork Connections wi dow.
2. I the etwork Connections wi dow, right-click the releva t Local
Area Connection ico a d select the Properties li e i the me u
displayed.
3. I the Local Area Connection Properties wi dow, o the General
tab, select the Internet Protocol (TCP/IP) li e. Click the Properties
butto .
5

DSL-2640U Quick Installation Guide
4. Select the Obtain an IP address automatically a d Obtain D S
server address automatically radio butto s. Click the OK butto .
5. Click the ОК butto i the co ectio properties wi dow.
Now your computer is co figured to obtai a IP address automatically.
6

DSL-2640U Quick Installation Guide
Obtaining P Address Automatically
in OS Windows 7
1. Click the Start butto a d proceed to the Control Panel wi dow.
2. Select the etwork and Sharing Center sectio . (If the Co trol Pa el
has the category view (the Category value is selected from the View by
drop-dow list i the top right cor er of the wi dow), choose the View
network status and tasks li e u der the etwork and Internet
sectio .)
3. I the me u located o the left part of the wi dow, select the Change
adapter settings li e.
4. I the ope ed wi dow, right-click the releva t Local Area Connection
ico a d select the Properties li e i the me u displayed.
5. I the Local Area Connection Properties wi dow, o the
etworking tab, select the Internet Protocol Version 4 (TCP/IPv4)
li e. Click the Properties butto .
7

DSL-2640U Quick Installation Guide
6. Select the Obtain an IP address automatically a d Obtain D S
server address automatically radio butto s. Click the OK butto .
7. Click the OK butto i the co ectio properties wi dow.
Now your computer is co figured to obtai a IP address automatically.
8

DSL-2640U Quick Installation Guide
PC with Wi-Fi Adapter
1. To connect the router to a DSL line: co ect a pho e cable betwee the
DSL port of the router a d the ADSL OUT port of the splitter. Co ect
your pho e to the PHONE port of the splitter. The co ect a other
pho e cable betwee a pho e jack a d the ADSL IN port of the splitter.
2. To connect the router to an Ethernet line: i the web-based i terface of
the router, select the router's LAN port that will be used as the WAN port
a d create a Ether et WAN co ectio . The co ect the Ether et cable
betwee the selected Ether et port located o the back pa el of the router
a d the Ether et li e.
3. Co ect the power cord to the power co ector port o the back pa el of
the router, the plug the power adapter i to a electrical outlet or power
strip.
4. Tur o the router by pressi g the ON/OFF butto o its back pa el.
5. Tur o your PC a d wait u til your operati g system is completely
loaded.
6. Tur o your Wi-Fi adapter. As a rule, moder otebooks with built-i
wireless NICs are equipped with a butto or switch that tur s o /off the
wireless adapter (refer to your PC docume ts). If your PC is equipped
with a pluggable wireless NIC, i stall the software provided with your
Wi-Fi adapter.
Now you should co figure your Wi-Fi adapter.
9

DSL-2640U Quick Installation Guide
Configuring Wi-Fi Adapter in OS Windows XP
1. Click the Start butto a d proceed to the Control Panel > etwork
and Internet Connections > etwork Connections wi dow.
2. Select the ico of the wireless etwork co ectio a d make sure that
your Wi-Fi adapter is o .
3. Search for available wireless etworks.
4. I the ope ed Wireless etwork Connection wi dow, select the
wireless etwork DSL-2640U a d click the Connect butto .
5. I the ope ed wi dow, e ter the etwork key (see WPS PIN o the
barcode label o the bottom pa el of the device) i the etwork key a d
Confirm network key fields a d click the Connect butto .
After that the Wireless etwork Connection Status wi dow appears.
!
If you perform i itial co figuratio of the router via Wi-Fi co ectio ,
ote that immediately after cha gi g the wireless default setti gs of the
router you will eed to reco figure the wireless co ectio usi g the
ewly specified setti gs.
10

DSL-2640U Quick Installation Guide
Configuring Wi-Fi Adapter in OS Windows 7
1. Click the Start butto a d proceed to the Control Panel wi dow.
2. Select the etwork and Sharing Center sectio . (If the Co trol Pa el
has the category view (the Category value is selected from the View by
drop-dow list i the top right cor er of the wi dow), choose the View
network status and tasks li e u der the etwork and Internet
sectio .)
3. I the me u located o the left part of the wi dow, select the Change
adapter settings li e.
4. I the ope ed wi dow, select the ico of the wireless etwork co ectio
a d make sure that your Wi-Fi adapter is o .
5. To ope the list of available wireless etworks, select the ico of the
wireless etwork co ectio a d click the Connect To butto or left-
click the etwork ico i the otificatio area located o the right side of
the taskbar.
11

DSL-2640U Quick Installation Guide
6. I the ope ed wi dow, i the list of available wireless etworks, select the
wireless etwork DSL-2640U a d click the Connect butto .
7. I the ope ed wi dow, e ter the etwork key (see WPS PIN o the
barcode label o the bottom pa el of the device) i the Security key
field a d click the OK butto .
8. Wait for about 20-30 seco ds. After the co ectio is established, the
etwork ico will be displayed as the sig al level scale.
!
If you perform i itial co figuratio of the router via Wi-Fi co ectio ,
ote that immediately after cha gi g the wireless default setti gs of the
router you will eed to reco figure the wireless co ectio usi g the
ewly specified setti gs.
12

DSL-2640U Quick Installation Guide
CO FIGURI G ROUTER
Connecting to Web-based nterface
Start a web browser. I the address bar of the web browser, e ter the IP
address of the router (by default, the followi g IP address is specified:
192.168.1.1). Press the Enter key.
!
If the error “ The page cannot be displayed ” (or “ Unable to display the
page ”/“ Could not connect to remote server ”) occurs upo co ecti g to
the web-based i terface of the router, make sure that you have properly
co ected the router to your computer.
After the first access to the web-based i terface you eed to cha ge the default
admi istrator password. E ter the ew password i the Password a d
Confirmation fields. You may set a y password except admin. Use digits,
Lati letters (uppercase a d/or lowercase), a d characters available o the
keyboard. The click the Apply butto .
!
Remember or write dow the ew password for the admi istrator
accou t. I case of losi g the ew password, you ca access the setti gs
of the router o ly after restori g the factory default setti gs via the
hardware RESET butto . This procedure wipes out all setti gs that you
have co figured for your router.
13

DSL-2640U Quick Installation Guide
Whe the web-based i terface is accessed the ext time a d after, the logi
page ope s. E ter the user ame (admin) i the Login field a d the password
you specified i the Password field, the click the Enter butto .
14

DSL-2640U Quick Installation Guide
After successful registratio the Home / Information page ope s. The page
displays ge eral i formatio o the router a d its software.
15

DSL-2640U Quick Installation Guide
The web-based i terface of the router is multili gual. If you eed to select
a other la guage for the web-based i terface, place the mouse poi ter over the
English captio i the top part of the page a d select a la guage from the
me u displayed.
To co figure the router use the me u i the left part of the page. Go to the
releva t sectio a d select the eeded page or ru the eeded Wizard i the
Home sectio .
Also you ca fi d a specific page via search. To do this, e ter the ame of the
page, wholly or partly, i the search bar i the top part of the web-based
i terface page, a d the select a eeded li k i the search results.
16

DSL-2640U Quick Installation Guide
Configuring Connection to the nternet
!
You should co figure your WAN co ectio i accorda ce with data
provided by your I ter et service provider (ISP). Make sure that you
have obtai ed all ecessary i formatio prior to co figuri g your
co ectio . Otherwise co tact your ISP.
ADSL WAN Connection
!Please reboot the router after creati g a ADSL WAN co ectio .
1. Go to the et / WA page, select the WAN co ectio a d click the
Delete butto . Save the setti gs a d wait u til the router is rebooted.
2. Go to the et / WA page a d click the Add butto .
3. From the Connection Type drop-dow list, select the eeded value.
4. From the Interface drop-dow list, select the DSL(new) value.
5. Specify a ame for your co ectio (a y ame for easier ide tificatio ) i
the ame field.
6. I the ATM sectio , specify the VPI a d VCI i the releva t fields, a d
the select a method of e capsulatio from the Encapsulation Mode
drop-dow list.
17

DSL-2640U Quick Installation Guide
7. For connection of PPPoA or PPPoE ty e: i the PPP sectio , e ter
authorizatio data provided by your ISP (the user ame (logi ) i the
Username field a d the password i the Password a d Password
confirmation fields), or select the Without authorization checkbox if
authorizatio is ot required.
8. For connection of IPv6 PPPoE or PPPoE Dual Stack ty e: i the PPP
sectio , e ter authorizatio data provided by your ISP (the user ame
(logi ) i the Username field a d the password i the Password a d
Password confirmation fields), or select the Without authorization
checkbox if authorizatio is ot required. If you eed to specify the
gateway address ma ually, i the IPv6 gateway sectio , deselect the
SLAAC checkbox a d fill i the Static IPv6 gateway address field.
18

DSL-2640U Quick Installation Guide
9. For connection of IPoA or Static IP ty e: i the IP sectio , fill i the IP
Address, etmask, Gateway IP address, a d Primary D S
server fields.
10. For connection of Dynamic IP ty e: if your ISP has provided the address
of the DNS server, i the IP sectio , deselect the Obtain D S server
addresses automatically checkbox a d fill i the Primary D S
server field.
19

DSL-2640U Quick Installation Guide
11. For connection of Static IPv6 ty e: i the IP sectio , fill i the IPv6
address a d Gateway IPv6 address fields.
12. For connection of Dynamic IPv6 ty e: if your ISP has provided the
address of the DNS server, i the IP sectio , deselect the Obtain D S
server addresses automatically checkbox a d fill i the Static
primary D S server field.
13. Deselect the AT checkbox i the Miscellaneous sectio if your ISP
requires you to disable the etwork address tra slatio fu ctio .
14. Click the Apply butto .
20