D-Link DSL-2740B User manual

©2007 D-Link Austr
a
res
p
Before Y
o
1. If you pur
c
computer
s
Provider
(
2. It is best
t
DSL-274
0
the nece
s
network
a
Check Y
o
If any of th
e
This product can b
e
any current web br
o
Internet Explorer 6
o
Navigator 6.2.3.
a
lia Pty Ltd. All rights reserved.
T
p
ective holders. Software and sp
e
DSL-2740B
A
o
u Begin
c
hased this Router to share
y
s
, you must have an establi
s
(
ISP).
t
o use the same computer th
0
B ADSL Modem Router. Th
e
s
sary IP address information
a
dapter to automatically obta
i
o
ur Packag
e
e
above items are m
e
set up using
o
wser, i.e.,
o
r Netscape
DSL-2740B 802
ADSL2
/
2+ Mod
e
CD-ROM with
C
Product Docu
m
3 Wireless Ant
e
Telephone Cab
l
CAT 5 UTP Eth
e
12V 1.2A
Power Adapter
T
rademarks or registered tradem
a
e
cifications subject to change wit
h
A
DSL Modem Route
r
.
y
our high-speed Internet co
n
s
hed Internet account from a
n
at is connected to your ISP
f
e DSL-2740B acts as a DH
C
on your network. See the A
p
i
n an IP address.
e
Contents
m
issing, please cont
a
Using a po
w
a different
v
damage an
d
warranty fo
r
.11n (draft) Wirele
s
e
m Route
r
C
lick’n Connect Uti
l
m
entation
e
nnas
le (RJ-11)
e
rnet Cable (RJ-45
)
D
S
AD
a
rks are the property of their
h
out notice.
n
nection with other
n
Internet Service
f
or configuring the
C
P server and will assign all
p
pendix for setting each
a
ct your reseller.
w
e
r
adapter with
v
oltage rating will
d
void the
r
this product.
s
s
l
ity and
)
S
L-2740
B
D
SL Modem Route
r
B
r

2
Connecting the Router to your
Computer
1. First, connect the power adapter to the power socket on the
back panel of the DSL-2740B and then plug the other end of
the power adapter to a wall outlet or power strip. Depress the
Power Button to turn ON the device. On the front of the device,
the Power LED will turn ON to indicate proper operation.
2. Insert one end of the Ethernet cable into an Ethernet port on
the back panel of the DSL-2740B and the other end of the
cable to an Ethernet Adapter or available Ethernet port on your
computer.
3. Insert the telephone cable included with the Router into the
ADSL port, and then connect the cable to your telephone line.
(Line must be activated for ADSL use)
4. Check the LED display on the front of the Router to confirm
that the connections have been made. (This will be shown with
solid lights for the corresponding port)

3
Configuring the Router via the
D-Link Click’n Connect Utility
Insert the CD-ROM into your PCs CD Drive. The Click’n Connect utility should
appear automatically. If it does not appear, explore your CD-ROM drive within
Windows, and double-click on the file “dslutility.exe” to start the utility
manually.
You can select one of five options:
1. View Manual: This option will open up the DSL-2740B user manual.
You will need Adobe Acrobat Reader installed to view the manual.
2. View QIG: This option will show you a software-based version of this
Quick Install Guide.
3. Install Acrobat Reader: Selecting this option will install Adobe Acrobat
Reader onto your PC.
4. Technical Support: Selecting this option will link you to D-Link
Australia/New Zealand Technical Support online.
5. Start Installation: This will commence the installation of the DSL-
2740B.

4
Configuring the Router via the
D-Link Click’n Connect Utility
The Click’n Connect utility will guide you through the installation process step-
by-step. Follow the on-screen instructions, then proceed to the next step.
Step 1 - Power Up the Device
Connect the Power Adapter from the wall socket to the DSL-2740B. Wait for the
Power LED to appear before proceeding onto the next step.
Follow the
on-screen
instructions,
then Click
Next to
continue

5
Configuring the Router via the
D-Link Click’n Connect Utility
The Click’n Connect utility will guide you through the installation process step-
by-step. Follow the on-screen instructions, then proceed to the next step.
Step 2 – Connect the Device to your Computer
Connect the Ethernet cable from the computer to one of the LAN ports
(numbered 1 to 4) on the DSL-2740. Wait for the LAN Link LED for the
corresponding LAN port number to flash, before proceeding onto the next step.
Follow the
on-screen
instructions,
then Click
Next to
continue

6
Configuring the Router via the
D-Link Click’n Connect Utility
The Click’n Connect utility will guide you through the installation process step-
by-step. Follow the on-screen instructions, then proceed to the next step.
Step 3 – Connect the Device to the ADSL Line
Connect your ADSL telephone line from the wall socket to the DSL-2740B
ADSL socket. Please note that if you are using an ADSL Splitter/Filter, you will
need to connect the telephone line from the DSL socket on the filter to the
DSL-2740B ADSL socket.
Once you have completed this, wait for the ADSL LED to light up, before
proceeding onto the next step.
Follow the
on-screen
instructions,
then Click
Next to
continue

7
Configuring the Router via the
D-Link Click’n Connect Utility
The Click’n Connect utility will guide you through the installation process step-
by-step. Follow the on-screen instructions, then proceed to the next step.
Step 4 – Detecting Internet Connection Type
The Click’n Connect utility will now check the DSL-2740B to make sure it has
been connected correctly. Once it has successfully detected your modem, it will
try to detect your Internet connection type.
At this point, you may want to prepare your ADSL account information that is
provided to you by your Internet Service Provider (ISP) as you will require it
shortly.
Follow the
on-screen
instructions,
then Click
Next to
continue

8
Configuring the Router via the
D-Link Click’n Connect Utility
The Click’n Connect utility will guide you through the installation process step-
by-step. Follow the on-screen instructions, then proceed to the next step.
Step 5 – ISP Configuration
You will now be prompted to select your Country as well as your Internet
Service Provider (ISP). If your ISP is not listed for your country, select Other
and enter the details that are relevant to your ISP.
Please ensure you have entered the correct information before proceeding onto
the next step.
Select your
ISP
Select your
Country
Follow the
on-screen
instructions,
then Click
Next to
continue

9
Configuring the Router via the
D-Link Click’n Connect Utility
The Click’n Connect utility will guide you through the installation process step-
by-step. Follow the on-screen instructions, then proceed to the next step.
Step 6 – Account Configuration
At this step, you will be required to enter your ADSL account Username and
Password, as provided by your ISP.
Please note, different ISP’s use different Usernames. Some use the first part of
your email address while some ISP’s use part or all of your email address. If
you are unsure as to which one your ISP uses, please confirm this with your
ISP.
Once you have completed the above you may proceed onto the next step.
Enter your ISP Username
Enter your ISP Password
Follow the
on-screen
instructions,
then Click
Next to
continue

10
Configuring the Router via the
D-Link Click’n Connect Utility
The Click’n Connect utility will guide you through the installation process step-
by-step. Follow the on-screen instructions, then proceed to the next step.
Step 7 – Set Wireless Connection
You will now be asked to set security for your wireless network. Type in your
desired Wireless Network Name, select a Channel, and set your preferred
Network Authentication settings for your wireless network. Please refer to
your User Manual for more information.
Important Note: You are strongly advised to enable Network
Authentication on your wireless network, as this will deter hackers
from gaining access to your network.
Enter your
Wireless Network
Name Name
Select your Channel
Select your
Network Authentication
Preferences
Follow the
on-screen
instructions,
then Click
Next to
continue