D-Link PowerLine AV2 1000 User manual

Quick Installation Guide
DHP-W611AV
PowerLine AV2 1000
Wireless AC1200 Starter Kit
(DHP-P610AV & DHP-W610AV)
Version 1.00 | October 5, 2016

1
DHP-W611AV
ENGLISH
Package Contents
Wi-Fi Conguration Note
DHP-P610AV PowerLine AV2 1000 Gigabit Passthrough Adapter
Wi-Fi Conguration Card
Ethernet Cable (x2)
DHP-W610AV PowerLine AV2 1000 Wireless AC1200 Extender
Hardware Installation
1. Plug the DHP-P610AV Powerline AV2 1000 Gigabit Passthrough Adapter into
a wall outlet near your router. Connect one of the included Ethernet cables
to a LAN port on your router, and connect the other end of the cable to your
DHP-P610AV.
1ROOM A
RouterInternet
DHP-P610AV

DHP-W611AV
2
ENGLISH
2. Fully extend the antennas and plug the DHP-W610AV into a wall outlet in a
place you want to extend your network. Slide the power switch on the side of
the device to the ON position.
3. Insert one end of the second included Ethernet cable into the DHP-W610AV,
and the other end into your computer. If you are using a wireless device
such as a mobile or tablet, connect to the DHP-W610AV over Wi-Fi with the
information on the Wi-Fi Conguration Card.
3ROOM B
PC
DHP-W610AV
Tablet
4ROOM A ROOM B
DHP-P610AV DHP-W610AV
RouterInternet
4. You have now nished the hardware setup of your PowerLine AV2 1000
Wireless AC1200 Starter Kit. You must complete the First-time Conguration
in the next section before you can use your product.
2
PC

3
DHP-W611AV
ENGLISH
First-time Conguration
1. Open your web browser and type the following into the URL box:
Windows: http://dlinkapWXYZ or http://dlinkap
Mac OS: http://dlinkapWXYZ.local. or http://dlinkap.local.
Where WXYZ is the last 4 digits of the MAC address. The full address is
printed on the included Wi-Fi Conguration Card.
2. Select Admin for the User Name and leave the Password blank, then click
Login.
3. From the landing page, start the Setup Wizard to establish your Powerline
connection by clicking Launch Setup Wizard.

DHP-W611AV
4
ENGLISH
4. When prompted, press the Simple Connect Button for 2 seconds on the
DHP-P610AV to connect it to the DHP-W610AV.
Note: If you don’t have an existing Powerline network, you will need to
set up security for all of your existing Powerline devices. Perform the
following steps for each device: press the Simple Connect Button
on the DHP-W610AV, then press the Simple Connect Button on your
existing Powerline device within 2 minutes.
5. Follow the on-screen instructions to set up your Powerline network. For
more detailed support, please refer to the User Manual.

5
DHP-W611AV
ENGLISH
Frequently Asked Questions
Q: Why can’t my DHP-W610AV nd my DHP-P610AV?
• Be sure both devices are plugged directly into a wall outlet. Plugging into a
power strip or another device may disrupt the connection.
• The electrical wiring must be on the same electrical circuit. You may need to
consult a local electrician if you are not sure.
Q: My connection is erratic and sometimes cuts out or is slow, why?
• Try to keep nearby outlets free of other devices, such as chargers and hair
dryers, to minimize electrical interference.
Q: How do I nd my wireless network? Can I change the network name?
• You can nd the default Wi-Fi name (SSID) and password on the Wi-Fi
Conguration Card. You can also set your own password for security
purposes.
• You can change your wireless settings by opening your web browser and
going to http://dlinkapWXYZ.local. then Setup then Wireless Settings.
WXYZ is an example, the actual address is on your conguration card.
Q: Can I use only the DHP-W610AV or DHP-P610AV to get online?
• Powerline devices work together to create a network. They communicate
over electrical wiring, but you still need an Internet connection from a router
and/or modem.
Q: Can I use more than one Powerline device at a time?
• Yes you can! D-Link oers a host of Powerline devices that include adapters,
extenders, and routers.

Technical Support
Thisguide isonlyforinitial conguration.Pleaserefertothe usermanualto
learn more or visit http://support.dlink.com for more information. Also
feel free to contact us. U.S. and Canadian customers can contact D-Link
Technical Support through our website. For warranty and regulatory
information, please visit http://support.dlink.com/warranty.aspx.
http://support.dlink.com
USA
http://support.dlink.ca
Canada
Copyright ©2016 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link
Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective owners.
Product specications, size and shape are subject to change without notice, and actual product appearance may dier from that depicted
on the packaging. Visit www.dlink.com for more details. Maximum throughput based on theoretical transmission PHY rate. Actual date
throughput will vary. Network conditions and environmental factors, including volume of trac and network overhead, may lower actual
data throughput rate. Interference from devices that emit electrical noise, such as vacuum cleaners and hair dryers, may adversely aect
the performance of this product. This product may interfere with devices such as lighting systems that have a dimmer switch, short wave
radios, or other powerline devices that do not follow the HomePlug AV and IEEE1901 standard.

Quick Installation Guide
DHP-W611AV
PowerLine AV2 1000
Wireless AC1200 Starter Kit
(DHP-P610AV & DHP-W610AV)
Version 1.00 | October 5, 2016

DHP-W611AV
1
FRANÇAIS
Contenu de la boîte
Note de conguration Wi-
Fi
DHP-P610AV PowerLine AV2 1000 Gigabit Passthrough Adapter
Carte de conguration
Wi-Fi
Câble Ethernet (x2)
DHP-W610AV PowerLine AV2 1000 Wireless AC1200 Extender
Installation matérielle
1. Branchez l'adaptateur d'intercommunication Gigabit CPL CPL AV2 1000
DHP-P610AV sur une prise murale située à proximité de votre routeur.
Connectez une extrémité de l'un des câbles Ethernet fournis à un port LAN
de votre routeur et l'autre extrémité à votre DHP-P610AV.
1PIÈCE A
RouteurInternet
DHP-P610AV