D-Link DWR-112 Manual

-1-
FAQ : How to Configure Dynamic Connection WAN Fail Over to 3G on DWR-112
Technical Support Setup Procedure
FAQ : How to Configure Dynamic Connection WAN Fail
Over to 3G on DWR-112
Release date : 5/01/2012
Model Support : DWR-112
H/W:A1
S/W:1.00

-2-
FAQ : How to Configure Dynamic Connection WAN Fail Over to 3G on DWR-112
Technical Support Setup Procedure
Dynamic Fail Over 
3G  DWR-112 
1: DWR-112 WI-FI 

-3-
FAQ : How to Configure Dynamic Connection WAN Fail Over to 3G on DWR-112
2: 2 , 3 4 DWR-112 Cable/ADSL
1 DWR-112 
DWR-112 
3: 3G USB Dongle USB DWR-112

-4-
FAQ : How to Configure Dynamic Connection WAN Fail Over to 3G on DWR-112
4: Internet Explorer, Mozilla Firefox Safari
address http://192.168.0.1 
Enter 
5:(username) 
“admin” “password” 
Login
6: SETUP  INTERNET 

-5-
FAQ : How to Configure Dynamic Connection WAN Fail Over to 3G on DWR-112
7: MANUAL INTERNET CONNECTION OPTION 
MANUAL INTERNET CONNECTION SETUP
8: INTERNET CONNECTION TYPE My
Internet ConnectionDynamic IP (DHCP) Enable WAN Failover.

-6-
FAQ : How to Configure Dynamic Connection WAN Fail Over to 3G on DWR-112
9: 3G INTERNET CONNECTION 
1. Auto Config
2. Country : 
3. ISP : 
4. Dial Number :  Dial (Dial Number) 
(ISP) 
5. APN : APN (ISP) 
6. Authentication Protocol : 
(Authentication)
7. Apply 

-7-
FAQ : How to Configure Dynamic Connection WAN Fail Over to 3G on DWR-112
 10 : Save Settings

-8-
FAQ : How to Configure Dynamic Connection WAN Fail Over to 3G on DWR-112
Technical Support Setup Procedure
How to Configure Dynamic Connection WAN Fail Over to 3G on DWR-112
Step 1: Slide the toggle switch to Wi-Fi beside the DWR-112 router.
Step 2: Connect the computer to either port 2, 3 or 4 of the DWR-112, Connect the Cable/ADSL
modem to port 1 of the DWR-112. Plug-in the power adapter to the power receptacle of the DWR-
112 and to the power outlet.

-9-
FAQ : How to Configure Dynamic Connection WAN Fail Over to 3G on DWR-112
Step 3: Plug in the 3G USB Dongle on the USB port of the DWR-112.
Step 4: Open a web browser such as Internet Explorer, Mozilla Firefox, Safari and etc. On the Address
bar type in the LAN IP Address of the DWR-112 which is 192.168.0.1 and then press on the Enter
key on your keyboard.
Step 5: A login screen will appear, type in the User Name as “admin” and leave the password field
blank and then click on the Login button.
Step 6: Click on the SETUP tab and then select on INTERNET button on the left hand side.

-10-
FAQ : How to Configure Dynamic Connection WAN Fail Over to 3G on DWR-112
Step 7: Under the MANUAL INTERNET CONNECTION OPTION section, click on the button,
Manual Internet Connection Setup.
Step 8: Under the INTERNET CONNECTION TYPE section, On the drop down menu for My
Internet Connection is, select on Dynamic IP (DHCP). Put a check mark on Enable WAN
Failover.
Step 9: Under the 3G INTERNET CONNECTION section, configure the following;
1. Uncheck on Auto Config
2. Country: Select your current location
3. ISP: Select who provides your Internet connection
4. Dial Number: Enter the Dial Number provided by your Internet Service Provider (ISP)
5. APN: Enter the APN provided by your Internet Service Provider (ISP)
6. Authentication Protocol: Select the on the drop down menu the required authentication
7. Click on the Apply button for the settings to take effect