D-Link Vonage VWR User manual

Configuration Guide
Get Ready to Enjoy -
The New Way to Phone!

ID-Link VWR User Manual
Welcome to Vonage!
It’s easy to get started with your Vonage VWR Device!
For assistance with installation or troubleshooting common problems, please refer to this
User Manual or Quick Start Guide.
Please visit www.vonage.co.uk/vwr to obtain the most up-to-date Configuration Guide
and a description of the latest VWR features.
Activation
If you purchased your Vonage VWR Device from a retail store, you must first activate
your Vonage phone service by visiting www.vonage.co.uk/activate.
After activation, wait 30 minutes before checking for a dial tone.
You will need your MAC ID, which is located on your Vonage VWR Device. The MAC ID is
a combination of twelve letters and numbers. Be sure to enter all of the characters. After
you have chosen a plan and activated, please follow the step-by-step installation guide
to set up your equipment.

IID-Link VWR User Manual
Table of Contents
Table of Contents
Welcome to Vonage!...................................................................................................... I
Chapter 1 - Product Overview ..................................................................................... 1
Package Contents ............................................................................................... 2
System Requirements ......................................................................................... 2
Front Panel .......................................................................................................... 3
Rear Panel........................................................................................................... 3
Chapter 2 - Installation................................................................................................. 4
Network Overview ............................................................................................... 5
Chapter 3 - Configuration ............................................................................................ 6
Login.................................................................................................................... 7
WAN .................................................................................................................... 8
Dynamic IP Address....................................................................................... 8
Static IP Address............................................................................................ 9
LAN.................................................................................................................... 10
DHCP ................................................................................................................ 11
Wireless............................................................................................................. 13
Wireless Security............................................................................................... 14
WEP ............................................................................................................. 14
802.1x........................................................................................................... 15
WPA/WPA2 ................................................................................................... 16
Password ........................................................................................................... 17
System............................................................................................................... 18
Virtual Server..................................................................................................... 19
Filters................................................................................................................. 21
Custom IP Filters.......................................................................................... 22
Performance ...................................................................................................... 23
Routing .............................................................................................................. 24
Dynamic Routing ............................................................................................... 25
DMZ................................................................................................................... 26

IIID-Link VWR User Manual
Misc ................................................................................................................... 27
UPnP ............................................................................................................ 28
DDNS ........................................................................................................... 29
SSH Access Control..................................................................................... 30
Web Access Control ..................................................................................... 31
Network Statistics .............................................................................................. 32
Connection Status ............................................................................................. 33
DDNS Status ..................................................................................................... 34
DHCP Client ...................................................................................................... 35
Product Info ....................................................................................................... 36
Ping Test ............................................................................................................ 37
Logout................................................................................................................ 38
Appendix A - Troubleshooting................................................................................... 39
IVR Messages ................................................................................................... 42
Appendix B - Technical Specifications..................................................................... 43

1D-Link VWR User Manual
Product Overview 1
Chapter 1 - Product Overview
Chapter1 - Product Over view

2D-Link VWR User Manual
Chapter 1 - Product Overview
Package Contents
System Requirements
Vonage VWR
Wireless Router
Telephone Jack Adaptors
(Doungle)
Blue Ethernet Cable
Yellow Ethernet Cable
CD-ROM with
User Guide Power Adapter
Any high speed DSL or Cable connection
A valid Vonage account
If you purchased your D-Link VWR at a retail location, make sure
to first activate your device at www.vonage.co.uk/activate. Please
wait 30 minutes before checking for a dial tone.

3D-Link VWR User Manual
Chapter 1 - Product Overview
Rear Panel
Front Panel
Power Internet Wireless Ethernet (1-4) Phone (1-2)
When the power light
stops blinking and is a
solid green, this indicates
that your adapter has
started up properly. Note
that both the power light
and the phone light must
be solid in order to make
a phone call.
A solid light indicates
connection on the
Internet port. This
light blinks during
data transmission.
A solid light indicates
that the wireless
segment is ready.
This light blinks
during wireless data
transmission.
A solid light indicates
a connection to an
Ethernet-enabled
computer on ports
1-4. This light
blinks during data
transmission.
Solid light indicates
that the phone
line is ready for
Vonage Internet
telephone or FAX
calls. A slow blinking
light indicates that
voicemail is present.
When the line is in
use or ringing, the
light will blink rapidly.
Phone (1 & 2) Ethernet (1-4) Internet Reset Power
Plug your phone into
port #1 and if you’ve
signed up for a second
Vonage phone line, an
optional phone or FAX
machine into phone
port #2.
Connect to other
Ethernet devices such
as computers using
standard Ethernet
cables.
This port is the
connection for the
Ethernet cable to the
Cable or DSL modem.
Press the reset button
for at least 10 seconds
to reset the Vonage
VWR Device back to
the default settings.
Plug in the
supplied power
adapter.
Note: When the Vonage Device is downloading/upgrading firmware from Vonage,the lights will blink rapidly in unison.

4D-Link VWR User Manual
Installation 2
Chapter 1 - Product Overview

5D-Link VWR User Manual
Chapter 2 - Installation
Network Overview
Please refer to your Quick Start Guide included with your Vonage VWR Device for
basic installation instructions.

6D-Link VWR User Manual
Configuration 3
Chapter 3 - Configuration
Chapter3 - Configuration

7D-Link VWR User Manual
Chapter 3 - Configuration
Login
Open a web browser such as Internet Explorer and enter the IP address (e.g.192.168.15.1)
of the Vonage VWR router.
Enter user for the username and your password (default password is user). Click the
Login button.

8D-Link VWR User Manual
Chapter 3 - Configuration
WAN
Dynamic IP Address
Select Dynamic IP Address to obtain IP Address information automatically from your
ISP. Select this option if your ISP does not give you any IP numbers to use. This option is
commonly used for cable modem and satellite services.
Name - The host name is optional but may be required by some ISPs.
MAC Address - The default MAC Address is set to the Internet port’s physical interface
MAC address on the Vonage Router. It is not recommended that you change the default
MAC address unless required by your ISP. You can enter your PC’s MAC Address
manually to replace the Internet port’s MAC address with the MAC address of your
Ethernet card.
Apply ISP DNS and SNTP - Check this box to use the DNS servers and time server
(SNTP) supplied by your ISP.

9D-Link VWR User Manual
Chapter 3 - Configuration
If you want to statically assign an IP address, click Static IP Address.
Select Static IP Address if all the Internet port’s IP information is provided to you by your
ISP. You will need to enter in the IP address, subnet mask, gateway address, and DNS
address(es) provided to you by your ISP. Each IP address entered in the fields must be
in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Vonage
VWR Device will not accept the IP address if it is not in this format.
IP Address - Enter the IP address assigned by your ISP.
Subnet Mask - Enter the Subnet Mask assigned by your ISP.
Default Gateway Address - Enter the Gateway assigned by your ISP.
DNS1/DNS2 - The DNS server information will be supplied by your ISP.
Apply ISP DNS and SNTP - Check this box to use the DNS servers and time server
(SNTP) supplied by your ISP.
Static IP Address

10D-Link VWR User Manual
Chapter 3 - Configuration
LAN
IP Address - Enter the IP address of the Vonage VWR Device. The default IP address is
192.168.15.1. If you statically assign the IP settings on your computer(s), this IP address
must be the default gateway address and a DNS server address on your computer(s).
Note: If you change the IP address, once you click Apply, you will need to enter the new
IP address in your browser to get back into the configuration utility.
Subnet Mask - Enter the Subnet Mask. The default subnet mask is 255.255.255.0.
HostName - Enter a host name (Optional).
Domain - Enter your network domain name (Optional).

11D-Link VWR User Manual
Chapter 3 - Configuration
DHCP
DHCP stands for Dynamic Host Control Protocol. The Vonage VWR Device has a
built-in DHCP server. The DHCP Server will automatically assign an IP address to the
computers on the LAN/private network. Be sure to set your computers to be DHCP
clients by setting their TCP/IP settings to “Obtain an IP Address Automatically.” When you
turn your computers on, they will automatically load the proper TCP/IP settings provided
by the Vonage VWR Device. The DHCP Server will automatically allocate an unused
IP address from the IP address pool to the requesting computer. You must specify the
starting and ending address of the IP address pool.

12D-Link VWR User Manual
Chapter 3 - Configuration
Enable DHCP Server - Click this to allow the Vonage VWR Device to assign your
computers the IP settings automatically.
Start IP - Enter the starting address for the DHCP server’s IP assignment.
End IP - Enter the ending IP address for the DHCP server’s IP assignment.
Note: If you statically (manually) assign IP addresses to your computers or
devices, make sure the IP addresses are outside of this range or you may have
an IP conflict.
Lease Time - The length of time for the IP address lease. Enter the Lease time in
seconds.
Enable DHCP Relay - Select this option to enable DHCP Relay. When DHCP relay is
enabled, the Vonage VWR Device is responsible for forwarding DHCP requests and
responses between network clients and a specified DHCP server.
Relay IP - Enter the IP address of the DHCP server that client DHCP requests will be
relayed to.
Server and Relay Off - When the DHCP server and relay functions are turned off, the
network administrator must statically configure the IP address, subnet mask and DNS
settings of every host on the network. The same IP address cannot be assigned to more
than one host, and the Vonage VWR Device must reside on the same subnet as the
other hosts.
LAN Clients - If you want a computer or device to always have the same IP address
assigned, you can create a DHCP reservation. The Vonage VWR Device will assign the
IP address only to that computer or device.
Note: This IP address must be within the DHCP IP Address Range.
Enter IP Address - Enter the IP address you want to reserve.
Hostname - Enter a name of the computer.
MAC Address - Enter the MAC address of the computer you want to assign the
IP address to.
If your computer is already listed, simply check the reserve box and click Apply.

13D-Link VWR User Manual
Chapter 3 - Configuration
Wireless
Enable AP - Check this box to enable the wireless function.
SSID - Service Set Identifier (SSID) is the name designated for a specific wireless local
area network (WLAN).The SSID’s factory default setting is DLinkVWR.The SSID can be
easily changed to connect to an existing wireless network or to establish a new wireless
network.
Disable SSID Broadcast - Uncheck the box to broadcast the SSID across the network.
All devices on a network must share the same SSID (Service Set Identifier) to establish
communication. Check the box if you do not wish to broadcast the SSID over the
network.
Channel - All devices on the network must share the same channel. (Note: The wireless
adapters will automatically scan and match the wireless setting.) For best results, use
channels 1, 6, or 11.
802.11 Mode - Select the mode from the drop-down menu.
Mixed - Select if using both 802.11b and 802.11g wireless devices.
B Only - Select if using all 802.11b wireless devices.
B+ - Select if using both 802.11b and b+ wireless devices.
G Only - Select if using all 802.11g wireless devices.

14D-Link VWR User Manual
Chapter 3 - Configuration
Wireless Security
WEP
Authentication Type - Select Open or Shared.
Cipher - Select the level of encryption desired: 64, 128, or 256-bit.
Encryption Key - Enter a WEP key. You may enter up to 4 different keys.
Wired Equivalent Privacy (WEP) is a wireless security protocol for Wireless Local Area
Networks (WLAN). WEP provides security by encrypting the data that is sent over the
WLAN.
Note: If you enable encryption on the Vonage VWR Device make sure to also enable
encryption on all the wireless clients or wireless connection will not be established.

15D-Link VWR User Manual
Chapter 3 - Configuration
802.1x
Server IP Address - Enter the IP address of your RADIUS server.
Port - Enter the port your RADIUS server is using. 1812 is the default setting.
Secret - Enter the secret or key. This secret must be used by your wireless clients.
Group Key Interval - Enter the Group Key Interval. 3600 is the default setting.
Select 802.1x when authenticating to a RADIUS server.

16D-Link VWR User Manual
Chapter 3 - Configuration
WPA/WPA2
Wi-Fi Protected Access (WPA) is a wireless security protocol for Wireless Local Area
Networks (WLAN). WPA and WPA2 provide inproved security over WEP through the
temporal key integrity protocol (TKIP) and Advanced Encryption Standard (AES).
Note: If you enable encryption on the Vonage VWR Device make sure to also enable
encryption on all the wireless clients or wireless connection will not be established.
Group Key Interval - Enter the Group Key Interval. 3600 is the default setting.
RADIUS Server - If you are using a RADIUS server for authentication, click the radio
button and enter the RADIUS server’s IP address, Port, and Secret (key).
Pre-Shared Key - To use a passphrase for authentication, click the radio button and then
enter the PSK String (WPA passphrase).