d3 Technologies d3 4x4pro User manual

d3technologies.com
d3 4x4pro & d3 4x2pro
HARDWARE
QUICK-START GUIDE

Index
d3technologies.com Unit C+D, 127-129 Great Suff olk Street, London, SE1 1PP, UK. +44 (0)20 7234 9840
1.
• INDEX
• PRO RANGE FRONT PANEL DIAGRAMS
• HARDWARE d3 4x4pro BACK PANEL DIAGRAM
• HARDWARE d3 4x2pro BACK PANEL DIAGRAM
• POWERING THE PRO RANGE
• d3 QUICK START
• VIDEO OUTPUT
• GENERAL INFORMATION
• SUPPORT
P 01
P 02
P 03
P 04
P 05
P 06
P 07
P 08
P 09

d3technologies.com Unit C+D, 127-129 Great Suff olk Street, London, SE1 1PP, UK. +44 (0)20 7234 9840
2.
Front Panel
4x4pro
d3 Rack Ears
Power Button
Power Indication
Reset
Firewire 800
USB 3.0 Ports
6.35mm Audio Jack
OLED Display
Rack Handles
2 x Thumbscrews
12
4x4pro
d3
d3d3d3d3 SSD Drives
Fan Cover
Power Supply Fan
Filter Housing in
Down Position
1234
1
2
3
4
Filter
Filter Brace
4 x Screws
To reveal the drive bay and to inspect the air fi lter undo the two thumb screws on the front of the d3 unit (1 & 2)
* The 4x4pro comes with 4x SSD drives. The 4x2pro comes with 2x SSD drives. For more info on hard drive confi guration see pro.d3technologies.com
You should regularly inspect the air fi lter on the front of the unit to prevent loss of cooling effi ciency. To remove the air fi lter material, fi rst remove the screws from
the fi lter housing marked as in the diagram above. Give the fi lter a clean, replace the fi lter in the metal frame and reattach the fi lter brace

3.
Hardware d3 4x4pro
d3technologies.com Unit C+D, 127-129 Great Suff olk Street, London, SE1 1PP, UK. +44 (0)20 7234 9840
PowerCON TRUE1 Loop Through
Display Port 1.2 Output 1
1 GBit/sec Ethernet A & B
Display Port 1.2 Output 2
Display Port 1.2 Output 3
Display Port 1.2 Output 4
USB 2.0 Ports A & B
USB 3.0 Port
10 GBit/sec Media Ethernet C & D
Light Switch for Back Panel I/O
HD SDI Inputs x4 or 3G SDI x 2
Midi IN & OUT
ADAT/SPDIF IN & OUT
Audio Output Left & Right XLR
Genlock Input & Loop Through
Audio Input Left & Right XLR
Neutrik PowerCON TRUE1

Hardware d3 4x2pro
d3technologies.com Unit C+D, 127-129 Great Suff olk Street, London, SE1 1PP, UK. +44 (0)20 7234 9840
4.
Dual Linked DVI-D Output 1
1 GBit/sec Ethernet A & B
10 GBit/sec Media Ethernet C
Light Switch for Back Panel I/O
HD SDI Inputs x4 or 3G SDI x2
Dual Linked DVI-D Output 2
Dual Linked DVI-D Output 3
Dual Linked DVI-D Output 4
Neutrik PowerCON TRUE1
USB 2.0 Ports A & B
USB 3.0 Port
Midi IN & OUT
ADAT/SPDIF IN & OUT
Audio Output Left & Right XLR
Audio Input Left & Right XLR
PowerCON TRUE1 Loop Through
Genlock Input
Not in use

Powering the Pro Range
5.
d3technologies.com Unit C+D, 127-129 Great Suff olk Street, London, SE1 1PP, UK. +44 (0)20 7234 9840
The d3 pro range uses the Neutrik powerCON TRUE1 as its power input. This mains connector is:
• Lockable
• Live-Mating (safely)
• Extendable
• Dust and water resistant according to IP65 in mated condition
To power the pro range you should use a cable with the following attributes:
• SJT fl exible cord, min. 12AWG, min. 300V, min. 60ºC, max 4.5 m long
• One end terminated with NEMA 5-15P/BS 1363/CEE 7 plug
• Other end terminated with appliance coupler type Neutrik AG, type NAC3FX
Powering a Multi Server System
The d3 pro range features a power pass-through, making it possible to connect multiple systems.
The power input to the machine is rated at 12Amps RMS per connection in Europe and USA.
Loop through cables should have the following attributes:
• SJT fl exible cord, min. 12AWG, min. 300V, min. 60ºC, max 4.5 m long
• One end terminated with appliance coupler type Neutrik AG, type NAC3MX-W
• Other end terminated with appliance coupler type Neutrik AG, type NAC3FX
True1 Powercon and Loop Through connections on rear of unit Power cable daisy chain

d3 Quick Start
6.
d3technologies.com Unit C+D, 127-129 Great Suff olk Street, London, SE1 1PP, UK. +44 (0)20 7234 9840
1. Units in the d3 4x4pro and d3 4x2pro range are fi tted with Neutrik powerCON TRUE1 connectors as
standard
2. Use the included power cable with the Neutrik powerCON TRUE1 connector to connect the d3 unit to a
power source
3. Make sure you have connected a KEYBOARD, MOUSE, MONITOR and SPEAKERS
4. Press the power button on the front panel of the unit and wait for the system to boot
Neutrik powerCON TRUE1 connector d3 unit connected to power source
4x2pro
d3
d3 unit connected to peripherals

Video Output
7.
d3technologies.com Unit C+D, 127-129 Great Suff olk Street, London, SE1 1PP, UK. +44 (0)20 7234 9840
d3 4x4pro & d3 4x2pro Options
The d3 4x4pro currently comes with either a) 4x Dual Link DVI Outputs, each capable of driving up to
2560x1600 pixels or b) 4x Displayport 1.2 outputs, each capable of driving up to 4096 x 2160 pixels.
The d3 4x2pro includes 4 x Dual Link DVI Outputs, each capable of driving up to 2160x1600 pixels.
b) 4 x Dual Linked DVI - D (2560 x 1600 max) * d3 4x4pro only
a) 4 x DisplayPort 1.2 (4096 x 2160 max) native * Either d3 4x4pro or d3 4x2pro

Should you have questions or experience issues with this product, contact d3 Technologies Support
department for assistance. Only certifi ed technicians should attempt to repair or confi gure components.
The system must be disconnected from all sources of power and the power cord removed from the power
input and output before servicing the rear connection panels or internal components.
Only trained and qualifi ed personnel should be allowed to install, replace, or service this equipment.
Ultimate disposal of this product should be handled according to all regional and national laws and
regulations.
AC-INPUT 100-240V
50/60Hz, 12A
AC-OUTPUT 100-240V
50/60Hz, 3A
Assembled in the USA with partial foreign content
FCC Class A Device
Ref: Part 15 of CFR Title 47
This Device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received including interference that may cause undesired operation.
Canada ICES-003 Class A
Canada NMB-003
10-010-075-RC
General Information
8.
d3technologies.com Unit C+D, 127-129 Great Suff olk Street, London, SE1 1PP, UK. +44 (0)20 7234 9840

Support
9.
d3technologies.com Unit C+D, 127-129 Great Suff olk Street, London, SE1 1PP, UK. +44 (0)20 7234 9840
Helpful Contacts
Helpful Resources
Hardware Manual pro.d3technologies.com
User Guide r11.d3technologies.com
Video Tutorials tutorials.d3technologies.com
Helpful Weblinks
d3 Trial d3technologies.com/contact/enquiry
d3 Software Updates getr11.d3technologies.com
d3 Webshop store.d3technologies.com
This manual suits for next models
1
Table of contents
Other d3 Technologies Server manuals