No. 11 EXTENSION WALL BRACKETS
•Screen can be extended 10" or 14" from wall
by simple selecting one of the two mounting
positons shown above.
•Install eye bolts in wall brackets. Determine
the height and location of the screen to be
mounted and mark. Measure the distance
between the centers of the 2 mounting
rings on the screen. Transfer the measure-
ment to the wall and attach the wall
brackets securely to the wall at those points.
•Maximum recommended fastener size is 5/16"
diameter.
•Do not overtighten fasteners.
•Hang screen on eye bolts.
•Extension wall brackets are only to be used
with screens weighing 75 pounds or less.
•For Model C, Model C with CSR and
Cosmopolitan®screens: Hang screen from
the eye bolts with S-hooks. Crimp both loops
of S-hooks closed.
•To provide proper tilt and eliminate keyston-
ing pull the screen down, then hook it back
to the wall by attaching the bail handle to an
accessory Tilt Lock, Da-Lite part No. 40965.
Tilt Lock is sold separately.
No. 23 EXTENSION WALL BRACKETS
•Screen can be extended 181/4", 20" or 24"
from wall by simple selecting one of the two
mounting positons shown above and wing
nut and bolt adjustment.
•Extension arm holes should be lined up with
desired holes in plastic bracket. Attach exten-
sion arms to wall brackets.
•Install eye bolts in extension arms.
Determine the height and location of the
screen to be mounted and mark. Measure
the distance between the centers of the 2
mounting rings on the screen. Transfer the
measurement to the wall and attach the wall
brackets securely to the wall at those points.
•Maximum recommended fastener size is 5/16"
diameter.
•Do not overtighten fasteners.
•Hang screen on eye bolts.
•Extension wall brackets are only to be used
with screens weighing 75 pounds or less.
•For Model C, Model C with CSR and
Cosmopolitan®screens: Hang screen from
the eye bolts with S-hooks. Crimp both loops
of S-hooks closed.
•To provide proper tilt and eliminate keyston-
ing pull the screen down, then hook it back
to the wall by attaching the bail handle to an
accessory Tilt Lock, Da-Lite part No. 40965.
Tilt Lock is sold separately.
14" POSITION
10" POSITION
181/4" & 24"
POSITIONS
20"
POSITION
Wall fasteners not
included
Wall fasteners not
included
HEX NUT (4)
EYE BOLT (2)
S-HOOK (2)
HEX NUT (4)
EYE BOLT (2)
S-HOOK (2)
