Dacor CM24T User manual

Install atIon InstructIons
automatIc coffee system
For use with models:
CM24T
CM24P
Part No. 65464 Rev. F

1
About Safety Instructions ..........................................................1
Important Safety Instructions ..................................................2-3
Design Specifications..................................................................3
Overall Dimensions.....................................................................3
Technical Specifications..............................................................3
Installation Specifications........................................................4-5
Location Requirements...............................................................4
Determine Water Hardness........................................................4
Nominal Cutout Specifications....................................................5
Installation Instructions..........................................................6-10
Verifying Package Contents........................................................6
Steam Barrier .............................................................................6
Plumbing Installation ..................................................................6
Installing the Cabinet Glides ......................................................8
Installing the Coffee System in the Cabinet ...............................9
Verifying Operation.....................................................................9
Installation Checklist ................................................................10
Notes .....................................................................................11-12
table of contents
about safety InstructIons
Warnings and Important Safety Instructions appearing in
this glide are not meant to cover all possible conditions
and situations that may occur. Common sense, caution,
and care must be exercised when installing, maintaining, or
operating an appliance.
Always contact Dacor®about problems or conditions you
do not understand.
If you have questions or problems with installation, contact
your Dacor dealer or the Dacor Customer Service Team.
Dacor Customer Service
Phone: [phone].
Email: [e-mail]
Web site: www.Dacor.com
safety symbols and labels
DANGER
Immediate hazards that WILL result in severe personal injury or
death.
WARNING
Hazards or unsafe practices that COULD result in severe
personal injury or death.
CAUTION
Hazards or unsafe practices that COULD result in minor
personal injury or property damage.
IMPORTANT:
Installer: In the interest of safety and to minimize problems, read these installation instructions completely and
carefully before you begin the installation process. Leave these installation instructions with the customer.
Customer: Keep these installation instructions for future reference and the local electrical inspector’s use.
about safety InstructIons
DANGER
IMPORTANT: Do not store or use combustible, flammable, or explosive vapors and liquids (such as gasoline) inside or in the
vicinity of this or any other appliance.
IMPORTANT: Before performing any type of service or installation, make sure that electrical power to the coffee system is turned
off or that power is disconnected.
IMPORTANT: This appliance is equipped with a three-prong
grounding plug for protection against possible electric shock hazards.
It must be plugged into a dedicated, grounded receptacle. Where a
standard two-prong wall receptacle is encountered, it is the personal
responsibility and obligation of the customer to have it replaced with
a dedicated, properly grounded three-prong wall receptacle. Do not
under any circumstances, cut or remove the third (ground) prong from
the power cord. Do not use an adapter plug. Do not use an extension
cord. Do not use a power cord that is frayed or damaged. The use of
a ground fault interrupter (GFI) is not recommended.
Power cord with
three-prong plug Grounded type
wall receptacle

2
Important safety InstructIons
WARNING
If the product is damaged, immediately contact the dealer or builder. Do not install or use a damaged appliance.
Do not use the coffee system until it has been properly installed by a qualified installer according to these installation instruc-
tions.
This appliance must be installed only by a qualified installer. The installer must show the user the location of the power connec-
tor and the fuse or junction box so that the user knows where and how to turn off power to the coffee system.
Do not install, repair, or replace any part of the coffee system unless specifically recommended in the literature accompanying
it. A qualified service technician should perform all other service.
Do not install the unit in an unrestrained, free-standing cabinet. The cabinet and coffee system may tip over.
Keep packaging materials away from children. Plastic sheets and bags can cause suffocation
Use the coffee system only for tasks expected of a home appliance as outlined in the use and care manual. This appliance is
not intended for commercial use.
DO NOT PUSHANY BUTTONS ON THE FRONT PANEL UNTILALL BODY PARTS AND CLOTHING ARE CLEAR OF THE
BREWING COMPARTMENT. KEEPALL BODY PARTS AWAY FROM THE BREWING COMPARTMENT DURING OR IMMEDI-
ATELY AFTER DRINK DISPENSING. HOT LIQUIDS AND STEAM CAN CAUSE SEVERE BURNS.
Only allow individuals to use the coffee system who are able to operate it properly.
Never allow anyone, including children to sit, stand, or climb on any part of the coffee system. Doing so may cause damage,
serious injury, or death.
Do not leave children alone or unattended in the area around the coffee system. Do not allow children to play with the controls,
or touch other parts of it.
Do not store items of interest to children on top of or above the coffee system. Children could be burned or injured while climb-
ing on the appliance.
Do not tamper with the controls.
The coffee system must be cleaned thoroughly according to the Routine Cleaning Instructions in the use and care manual
before operating it for the first time.
This coffee system must be cleaned and maintained according to the maintenance schedule in the use and care manual. Clean
it only in the manner indicated in the use and care manual and using only the cleaning agents specified.
Do not use a steam or pressure cleaner to clean the coffee system or any part of it. Damage caused by cleaning the unit in this
manner could result in electric shock, fire, or explosion.
When installing and cleaning the coffee system, exercise care with hands and arms around the metal edges.
Many metal surfaces behind the front panel and inside the brewing compartment are hot when the power switch is on. Exercise
care around metal surfaces in these areas when the power switch is on.
Read the accompanying use and care instructions before operating the coffee system.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
To prevent jamming of the grinding mechanism, use only the types of coffee beans specified in the use and care manual.
Remove the drip tray before closing the front panel door. Closing the front panel door without the drip tray removed could dam-
age parts of the coffee system.
To prevent clogging of the internal parts, use only filtered water as specified on the facing page. Do not used distilled water.
Do not put any part of the coffee system in a dishwasher. Many of the parts are not dishwasher safe.
Keep the keys in a safe place. Replacement keys are not covered by the warranty.
To prevent damage to the control panel door, do not set the appliance on the floor or counter prior to installation.
1.
2.
3.
4.
5.
6.
CAUTION
To reduce the risk of fire, electric shock, serious injury or death when using your
appliance, follow basic safety precautions, including the following:

3
Important safety InstructIons
Any questions or problems with this installation
should be directed to your Dacor dealer or the Dacor
Customer Service Department.
Dacor Customer Service
1-800-793-0093 (U.S.A. and Canada)
Monday — Friday 6:00 am to 5:00 pm Pacific Time
e-mail: [e-mail].
Web site: www.Dacor.com
If the unit requires service, be sure to have the model
and serial number available when you call. The model
and serial number are on the data plate located inside
the brewing unit door. See the use and care manual if
you need instructions on how to open the front panel and
brewing unit doors.
Serial Number
Label
desIgn specIfIcatIons
Overall Dimensions
18 3/16”
(462mm)
22 1/16 (560mm)
17 9/16”
(445mm)
21 9/16”
(548mm)
13/16”
(20mm)
23 1/2”
(596mm)
17 5/16”
(440mm)
All tolerances are + 1/16”, - 0” unless otherwise stated.
overall dImensIons technIcal specIfIcatIons
Power Requirements 120V, 60Hz, 20A dedicated
circuit required
Total Connected
Load 1.8kW (15A)
Power Cord Length 60 inches
Unit Weight 110 lbs.
Shipping Weight 139 lbs.
Fresh Water Capacity 5 Liters/1.3 Gallons
(Model CM24T only)
Minimum Regulated
Input Pressure 1.5 Bar (21.8 psi) at regulator output connection
Maximum Regulated
Input Pressure 3.0 Bar (43.5 psi) at regulator output connection
Water inlet diameter 1/4 inch (1/4-19 BSPP thread)
(Model CM24P only)

4
plannIng the InstallatIon
locatIon requIrements
• Dacor®cannot be held responsible for damage to
property or injury to persons caused by failure to
comply with the installation, maintenance, and safety
instructions contained in this handbook.
• Statutory regulations and the connection specifications
issued by the local power supply company must be
strictly observed.
• The coffee system is supplied with a 60” (1524mm)
long power cord terminated by a three-prong plug. The
power cord is intended to be plugged directly into a
dedicated, wall-mounted electrical receptacle.
• The correct voltage, frequency, and amperage must be
supplied to the electrical receptacle from a grounded,
dedicated, single phase circuit that is protected by a
properly sized circuit breaker or time-delay fuse. If one
is not installed, call a licensed electrician.
• The coffee system must be installed at a safe distance
from other sources of heat, such as home appliances,
in order to avoid an excessive rise in temperature.
• For ventilation purposes, there must be a slot near the
top of the cabinet back. The minimum dimensions are
4” X 12” (10.0 X 30.0cm).NOTES:
1. The electrical box and water shut off valve (for model
CM24P) should be located in an adjacent cabinet.
2. The electric cord is located in the lower right rear
corner on the back of the unit.
3. To connect the water supply to a hose, you will need a
hose fitting with a 1/4-19 BSPP female thread.
4. Do not install the unit in a free-standing cabinet.
5. To prevent damage to the control panel door, do
not set the appliance on the floor or counter prior to
installation.
determIne Water hardness
Before installing the coffee system, determine the water
hardness level by doing one of the following:
• Use the water hardness test strips included with the
appliance to test the water hardness level of the water
supplied to the building where the coffee system will be
installed. Dip the strip in a cup of water from a faucet
and read the hardness level according to the color key
included with the test strips.
• Call the local water company. Ask them for the water
hardness level of the water supplied to the building
where the coffee system will be installed.
For Model CM24T (Tank Model):
• If the water hardness level is above four grains per
gallon (4 gpg) you must use filtered water with a
hardness of 4 gpg or less. Do not use distilled water.
• If the water hardness level is below 4 gpg, you may
use tap water in the coffee system. Filtered water is
recommended for better taste.
For Model CM24P (Plumbed Model):
• If the water hardness is above 4 grains per gallon
(4gpg) contact a water treatment specialist. Have a
water treatment system installed that lowers the water
hardness level to 4 gpg or less.
• Regardless of the type of water treatment system
installed, Dacor highly recommends installation of
a Dacor ACFS flushing system (not included) with
model CM24P. The coffee system requires periodic
decalcification regardless of the water hardness level.
The filter head included in the flushing system kit is
required to perform this process for model CM24P.
• Attach the included bypass module to the filter head. If
the water supply to the filter head is unfiltered, you may
attach the optional filter cartridge (Dacor P/N ACWF)
instead to improve water taste. To prevent leaks over
time, DO NOT use the JT-2 flushing cartridge for
everyday use.
Dacor ACFS flushing system kit installation.
Install for model CM24P.
Bypass Module
Filter Head
To coffee system
To house water
supply or whole
house water filter
Installation of optional filter cartridge kit for model
CM24P with a water supply having no existing filter
system.
Optional Filter
Cartridge
(Dacor P/N ACWF)
Filter Head
To coffee system
To house
water supply

5
plannIng the InstallatIon
17 7/8”
(454mm)
1” (26mm)
Screw 8 places
(provided)
3/4” (19mm)
Level Support Platform
24”
(610mm)
Steam Barrier
(provided)
Optimal Water
and Electrical
Supply Location
20 3/4”
(527mm)
1/8”
(3mm)
22 3/16”
(564mm)
1” Min.
(26mm)
1” Min. (26mm)
3/4” (19mm)
Min. Side Walls
22 1/8” - 22 3/8”
(562mm - 568mm)
8””
(203mm)
6” (152mm) min.
to room floor
3/4” (19mm)
Min. Side Walls
nomInal cutout specIfIcatIons
Coffee maker pulled
out from cabinet
Overhanging
cabinet
Veritical distance
to overhanging cabinet
22” (559mm)
Min. distance to
floor of room: 1” (25.4mm)
Max. recommended
distance to floor of room:
36” (914mm)
Ventilation opening in
back of cabinet
4” X 12” Min.
(100mm X 300mm)
During normal operation, the user must
have access to the top of the unit. The
user needs to be able to pour coffee into
the coffee bins on top and, on model
CM24T, be able to remove the water tank
for filling and cleaning. Install the coffee
maker low enough so that the user can
reach the top of the unit easily when it is
slid out of the cabinet.
Vertical Distance
CM24T 14” Minimum
CM24P 6” Minimum
14” Minimum
All tolerances are + 1/16”, - 0” unless
otherwise stated.
WARNING
Electric Shock Hazard: Due to steam and
spillage during normal use, DO NOT install
this appliance above or below any other
appliance.

6
Pressure
Regulator
Output
Pressure
Adjustment
Control
Knob
Pressure Gauge
Quick-Release
Fitting
Flow Direction
Arrow
Quick-Release
Fitting Gauge O-ring
(black)
Pressure Regulator Assembly
• Install the pressure regulator bracket in the upper left or
right rear corner by removing and utilizing the screw on
the rear of the unit as shown.
• Mount the pressure regulator on the bracket.
plumbIng InstallatIon
(Model CM24P Only)
CAUTION
To prevent damage to the coffee system due to hard water, prior
to installation check the water hardness for building where you
will be installing the coffee system (see page 3). If necessary
have a qualified water treatment specialist install a water
treatment system. The water treatment system must be installed
between the house plumbing and the coffee system regulator.
• Remove all of the parts from the regulator kit
packaging. The kit includes 4mm (5/32”) Teflon hoses,
a pressure regulator, three quick-release fittings, a
pressure gauge, and a mounting bracket.
• Assemble the pressure regulator gauge, gauge O-ring,
and two of the quick-release fittings as shown.
Pressure Regulator Mounting
Control Knob
• Remove the coffee system from the packaging and
inspect it for damage. Do not install a damaged
system.
• Insert the steam barrier into the cut-out. Push it all the
way to the back so that the back of it lines up with the
back wall of the cabinet.
• Attach it with the eight provided screws.
Steam Barrier Installation
Steam Barrier
(provided)
Screw 8 places
(provided)
InstallatIon InstructIons
steam barrIer
verIfyIng the package contents
• Use & care manual
• Steam barrier with 8 (M4.5 X 20 round head) mounting
screws
• 2 glide assemblies with (M5 X 6) mounting screws
• 6 metal shims, 1/16” (1mm)
• Detergent tablets (sample)
• Pressure regulator (model CM24P only)
• Pressure regulator bracket (model CM24P only)
• Pressure gauge (model CM24P only)
• Regulator gauge O-ring (model CM24P only)
• 3 piece 1/4” compression fitting and 1/4-16 BSPP male
thread quick release fitting (model CM24P only)
• Teflon tubing (model CM24P only)
• Spare tank O-ring (model CM24T only)
• Spare piston assembly O-ring
• Allen wrench (for grinder adjustment)
• Liquid detergent (sample)
• Anti-liming powder (sample)
• Measuring cup for ground coffee
• Cleaning brush
• Keys (located inside the left slide-out compartment)

7
• Cut a section of the supplied Ø 4mm (5/32”) Teflon
hose long enough to connect between the coffee
system water inlet quick release fitting and the
regulator without binding or kinking.
• Insert one end of the Teflon hose (Ø 4mm) into the
quick-release fitting on the appliance. Then pull it out
slightly to make sure that it is secure.
• Connect the hose connected to the appliance to
the output of the regulator. Pay attention to the flow
direction arrows on the pressure regulator.
IMPORTANT: If you connect the hoses to the regulator
backwards, the water will not flow into the coffee
system and it will not work.
• Insert the end of the second hose into the input on the
regulator.
• Attach the third quick-release fitting to the second hose.
• With the main water valve closed, attach the quick-
release fitting to the water line from decalcification kit.
You can connect to a house water supply hose or water
line using a hose fitting (not supplied) that connects
to the 1/4-19 BSPP male thread on the quick release
connector.
InstallatIon InstructIons
Pressure Regulator Adjustment
IMPORTANT: The water pressure at the output of
the pressure regulator may not exceed 3.0 bars/43.5
psi (1.5 bars/21.8 psi minimum). To adjust the output,
pull the pressure regulator control knob up slightly.
Turn it clockwise to increase the output pressure.
Turn it counter-clockwise to reduce the pressure. After
adjustment, gently push the control button back in.
Coffee System Water Inlet
Hose Fitting
(not supplied)
Quick Release
Connector from
regulator
Quick-Release Fitting
Pressure Regulator Adjustment
Control Knob

8
• Put the two cabinet glide assemblies, and shims if
necessary, as shown on the inside surfaces of the
cabinet. Position them 3 1/2” (90mm) from the front
edge of the cutout opening.
• Insert the screws in the holes of the glides without
tightening them completely.
• Make sure the outside distance between the fixing
angles is 22 1/8” (562mm) and that the glides are
level. Change the number of shims or adjust the
fixing angles as necessary.
IMPORTANT: Make sure that glides are level.
• Tighten all of the screws.
• Make sure that the power cord and water feed line
can be fed freely through the back wall.
• In order to avoid overheating the coffee system,
make an opening of at least 3 15/16” (100mm) at the
back of the cabinet to allow air to circulate.
The cabinet glides mount to the inside of the cabinet.
The glides on the coffee system slide into the cabinet
glides. The glides system allows the coffee system to
slide in and out of the cabinet for loading the coffee
bins and for maintenance.
To install the cabinet glides:
• Determine the number of shims required to mount the
cabinet glide assemblies according to the chart and
diagrams below. The appliance is supplied with six
1/16” (1mm) metal shims. Use the shims to position
the fixing angles so that they are properly spaced.
The appliance will not slide in and out of the cabinet
properly if the fixing angles are not properly spaced.
InstallatIon InstructIons
22 1/8” (562mm) Nom.
3/4” (19mm)
Min. Side Walls
4” X 12” (100mm X 300mm) Min.
Cabinet Back Cutout for
Air Circulation
Side Wall
Cabinet Base
Shim
Fixing Angle
Cabinet
Glide
Cabinet
Glide
Asssembly
Cutout Width Number of Metal Shims Required
22 1/8” (562mm) 0
22 3/16” (564mm) 2 total (1 on each side)
22 1/4” (566mm) 4 total (2 on each side)
22 3/8” (568mm) 6 total (3 on each side)
Cabinet Front
Cabinet Rear
4” (100mm)
Cabinet Back Cutout for
Air Circulation
3 1/2”
(8.9cm)
18”
(45.7cm)
3 9/16”
(9.0cm)
Cabinet Glide Installation
InstallIng the cabInet glIdes
Cabinet Glide Assembly and Shims

9
InstallatIon InstructIons
InstallIng the coffee system In the
cabInet
• While supporting the coffee system from below, insert it
into the cabinet cutout. As you insert it into the cabinet,
line up the glides on the appliance with the cabinet
glides. The system should glide on the rails when slight
pressure is applied to the front of the coffee system. If
it does not glide smoothly, check the distance between
the glides again. See page 8.
• As you slide the coffee system into the cabinet the
locking tab on the glides will engage.
Locking Tab
Locking Tab Location
verIfyIng operatIon
• Plug the coffee system into the dedicated, properly
grounded, 3-prong receptacle.
• Turn the light on and off to test it.
• Turn on the power switch, located below the control
panel.
• On model CM24P (plumbed model): turn on the water
supply at the shut-off valve. Check to make sure the
pressure regulator is set between 1.5 bars to 3 bars
pressure. Adjust the regulator if necessary.
• On model CM24T (tank model): Fill the tank with
filtered water (4 gpg maximum water hardness, do not
use distilled water).
• Push the hot water button. Wait about
six seconds.
• Continue to push the hot water button
every six seconds until air bubbles no
longer come out of the dispenser and about six ounces
of water is dispensed.
• Clean the coffee system according to the Routine
Cleaning and Milk Cleaning instructions in the use and
care manual. On model CM24T, clean the water tank.
• Put a sauce pan under the drink dispenser.
• Make one of each type of drink in the Basic Operation
Instructions section of the use and care manual.
If the coffee system does not operate properly, follow
these troubleshooting steps:
1. Verify that power and water are being supplied to the
coffee system. On CM24T, make sure the water tank
is full.
2. Make sure that the coffee bins have been properly
filled according to the Basic Operating Instructions in
the use and care manual.
3. Check the regulator to make sure it is properly
adjusted.Air in the system during initial operation can
cause the initial adjustment to be incorrect.
4. Make sure that water flows through the pressure
regulator in the right direction.
5. Repeat the above test.
6. If the appliance still does not work, contact an
authorized Dacor®service company. If you are
unable to locate a Dacor Service company, please
contact Dacor at [phone], or visit us on the
web at www.Dacor.com. Do not attempt to repair
the appliance yourself. Dacor is not responsible for
service required to correct a faulty installation.
Ifyou need to remove the coffee
system from the cabInet
Should the coffee system need to be removed from its
location:
• Disconnect the power plug from the power receptacle.
• Press the respective locking tabs on the glides and
remove the appliance, supporting it from below.
CAUTION
Pour only roasted, unflavored coffee into the coffee bean
container. Any other kind of coffee, e.g. coffee which has
already been ground, will damage the grinder.

10
InstallatIon checklIst
WARNING
WARNING:
To ensure a safe and proper installation, the following
checklist should be completed by the installer to
ensure that no part of the installation has been
overlooked.
Proper installation is the responsibility of the
homeowner. The importance of proper installation of
your coffee system cannot be overemphasized.
•
•
Is the coffee system connected to, or using only soft
water (4 gpg maximum hardness)? See page 4.
Has the coffee system been cleaned prior to use as
specified in the use and care manual?
Is the coffee system connected to a dedicated,
grounded power receptacle? See Location
Requirements, on page 4.
Is the steam barrier installed? See Page 6.
Is the pressure regulator properly adjusted?
See Page 7.
Are the cabinet glides properly adjusted? See page 8.
Is there a vent hole in the back of the cabinet to allow
heat to escape? See page 8.
Is the coffee system locked into the locking tabs on the
glides? See page 9.
Has the installer verified proper operation?
Have any problems been noted on the warranty card
or during the on-line warranty activation? Has the
warranty been activated on-line or the warranty card
filled out completely and mailed?
□
□
□
□
□
□
□
□
□
□
InstallatIon InstructIons

11
notes

12
notes

Copyright © 2007 by Dacor Inc. All rights reserved.
Web Site: www.Dacor.com
Phone: [phone]