Dahua Technology A21BM0V User manual

2 MP HDCVI Dome Camera
A21BM0V
Quick Start Guide
Version 1.0.1
Dahua Technology USA Inc.

Table of Contents
1Welcome........................................................................................................................1
1.1 Important Safeguards and Warnings.................................................................1
Electrical safety.................................................................................................1
Environmental Precautions...............................................................................2
Operation and Daily Maintenance.....................................................................3
Warnings...........................................................................................................3
1.2 FCC Information................................................................................................4
FCC compliance：............................................................................................4
1.3 Legal Notices ....................................................................................................4
Copyright...........................................................................................................4
Trademarks.......................................................................................................4
1.4 Disclaimer .........................................................................................................5
2Unpacking......................................................................................................................6
3Installation and Configuration........................................................................................7
3.1 Camera Configuration and Cables....................................................................7
Camera Components........................................................................................7
Cable Connections............................................................................................7
3.2 Framework and Dimensions .............................................................................8
3.3 Locally Storing Data..........................................Error! Bookmark not defined.
4Device Installation .........................................................................................................9
4.1 Installing the Camera........................................................................................9
5Network Configuration...................................................Error! Bookmark not defined.
5.1 Network Protocols.............................................Error! Bookmark not defined.
5.2 Modifying the IP Address..................................Error! Bookmark not defined.
5.3 Using the ConfigTool.........................................Error! Bookmark not defined.
5.4 Accessing the Web Interface ............................Error! Bookmark not defined.
5.5 Configuring Local SD Card Recording..............Error! Bookmark not defined.

1
1 Welcome
This manual offers reference material and general information about the basic operation,
maintenance, and troubleshooting of the Dahua Multi-Sensor Panoramic Camera. Read, follow, and
retain the following safety instructions. Heed all warning on the unit and in the operating instructions
before operating the unit. Keep this guide for future reference.
1.1 Important Safeguards and Warnings
Electrical safety
•Install the unit in accordance with the manufacturer’s instructions and in accordance with
applicable local codes.
•All installation and operation must conform to your local electrical safety codes.
•Do not overload outlets and extension cords, which may cause fire or electrical shock.
•Do not place the camera near or in a place where the camera may contact overhead power lines,
power circuits, or electrical lights.
•Ensure power conforms to SELV (Safety Extra Low Voltage) and that the limited power source is
rated AC 24V as specified in IEC60950-1. (Power supply requirement is subject to the device
label).
•All input/output ports are SELV circuits. Ensure that SELV circuits are connected only to other
SELV circuits.
•Ground the unit using the ground connection of the power supply to protect the unit from damage,
especially in damp environments.
•Protect the plug and power cord from foot traffic, being pinched, and its exit from the unit.
•Units with or without an ON/OFF switch have power supplied to the unit whenever the power
cord is inserted into the power source; however, the unit is operational only when the ON/OFF
switch is in the ON position. The power cord is the main power disconnect device for switching
off the voltage for all units.
•Operate the unit only from the type of power source indicated on the label. Before proceeding,
disconnect the power from the cable to be installed into the unit.
•For external power supplied units, use only the recommended or approved power supplies.
•Limited power sources must comply with EN 60950. Substitutions may damage the unit or
cause fire or shock.
•For 24 VAC units, voltage applied to the unit’s input power should not exceed ±25%. User-
supplied wiring must comply with local codes (Class 2 power levels). Do not ground the
supply at the terminals or at the unit’s power supply terminal.
•Contact the local dealer or the power company to verify the correct power supply.
•Do not supply power via the Ethernet connection (PoE) when power is already supplied via the
power connector.
•Do not attempt to service the unit. Opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified personnel.

2
•If the unit is damaged and requires service, unplug the unit from the main AC power supply and
from the PoE supply and refer to qualified service personnel. Damage may include, but is not
limited to:
•The power supply cord or plug is damaged.
•Liquid has spilled in or on the unit.
•An object has fallen on the unit.
•The unit has been dropped and the housing is damaged.
•The unit displays a marked change in performance.
•The unit does not operate in the expected manner when the user correctly follows the proper
operating procedures.
•Ensure a service technician uses replacement parts specified by the manufacturer, or that have
the same characteristics as the original parts. Unauthorized parts may cause fire, electrical
shock, or other hazards. Dahua is not liable for any damage or harm caused by unauthorized
modifications or repairs.
•Perform safety checks after completion of service or repairs to the unit.
•Use attachments and accessories only specified by the manufacturer. Any change or
modification of the equipment, not expressly approved by Dahua, could void the warranty.
•Incorporate a readily accessible disconnect device in the building installation wiring for quick
power disconnect to the camera.
•Dahua assumes no liability or responsibility for any fire or electrical shock caused by improper
handling or installation.
Environmental Precautions
•Do not aim the unit at a strong light source or into direct sunlight to focus. A strong light source
may cause overexposure and may affect the longevity of the CCD or the CMOS sensor.
•Transport, use, and store the unit within the specified temperature and humidity range.
•Do not place the unit in a wet, dusty, extremely hot or an extremely cold environment; and avoid
environments with strong electromagnetic radiation or unstable lighting.
•Never push objects of any kind into this unit through openings as they may touch dangerous
voltage points or cause a short circuit that may result in fire or electrical shock. Take care to not
spill any liquid on the unit.
•Do not use units intended for indoor applications near water, in damp or wet environments, or in
any area classified as a wet location. Do not expose an indoor unit to rain or moisture to reduce
the risk of fire or electric shock.
•Do not block or cover any openings in the unit enclosure. These openings are provided for
ventilation to prevent overheating and to ensure reliable operation. Ensure the unit is placed in
an area with adequate ventilation.
•Do not place the unit near a heat source such as heaters, stoves, radiators or other equipment
that produces heat.
•Pack the unit with standard factory packaging or material of the same quality when transporting
the unit.
•Take care to avoid heavy stress, violent vibration, or water spills to the camera unit during
transportation, storage, and installation.

3
Operation and Daily Maintenance
•Do not touch the heat dissipation component of the unit. This part of the unit is hot and may
cause a burn.
•Do not open or dismantle the device; there are no components that a user can fix or replace.
Opening the unit may cause water leakage or expose components to direct light. Contact the
manufacturer or a qualified service representative to service the camera or to replace a
component, including the desiccant.
•Dahua recommends the use of a thunder-proof device in concert with the unit.
•Do not touch the CCD or the CMOS optic sensor. Use a blower to clean dust or dirt on the lens
surface. Use a dry cloth dampened with alcohol and gently wipe away any dust on the lens.
•Use a dry soft cloth to clean the unit’s housing. If the unit is particularly dusty, use water to dilute
a mild detergent, apply the diluted detergent to a soft cloth, then gently clean the device. Finally,
use a dry cloth to wipe the unit dry. Do not use a volatile solvent like alcohol, benzene, or thinner;
or use a strong detergent with abrasives, which may damage the surface coating or reduce the
working performance of the unit.
•Do not touch or wipe a dome cover during installation, this cover is an optical device. Refer to
the following methods clean the dome cover:
•Stained with dirt: Use an oil-free soft brush or blower to gently remove the dirt.
•Stained with grease or fingerprints: Use a soft cloth to wipe gently the water droplet or the oil
from the dome cover. Then, use an oil-free cotton cloth or paper soaked with alcohol or
detergent to clean the lens from the center of the dome to outside. Change the cloth several
times to ensure the dome cover is clean.
Warnings
•Change the default password after the initial login to protect the integrity of the network.
•Use the standard accessories provided by the manufacturer and ensure the unit is installed and
commissioned by qualified professionals.
•Protect the lens area from laser radiation when using a laser device to aid in installation and
leveling of the unit.
•Do not supply power via the Ethernet connection (PoE) when power is already supplied via the
power connector.

4
1.2 FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
•This device may not cause harmful interference;
•This device must accept any interference received, including interference that may cause
undesired operation.
FCC compliance
：
This equipment has been tested and found to comply with the limits for a digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio
communication. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
1.3 Legal Notices
Copyright
This user guide is ©2016, Dahua Technology Company, LTD.
This user guide is the intellectual property of Dahua Technology Company, LTD and is protected by
copyright. All rights reserved.
Trademarks
All hardware and software product names used in this document are likely to be registered
trademarks and must be treated accordingly.

5
1.4 Disclaimer
•This user guide has been compiled with great care and the information it contains has been
thoroughly reviewed and verified. The text was complete and correct at the time of printing. This
guide may be periodically updated to reflect changes to the product or to correct previous
information and the content of this guide can change without notice. If you encounter an error or
have any questions regarding the contents of this guide, contact customer service for the latest
documentation and supplementary information. Dahua accepts no liability for damage resulting
directly or indirectly from faults, incompleteness, or discrepancies between this guide and the
product described. Dahua is not liable for any loss caused by installation, operation, or
maintenance inconsistent with the information in this guide.
•Video loss is inherent to all digital surveillance and recording devices; therefore Dahua cannot be
held liable for any damage that results from missing video information. To minimize the
occurrence of lost digital information, Dahua recommends multiple, redundant recording systems,
and adoption of backup procedure for all data.
•Contact the supplier or customer service if you encounter any issue while using this unit.

6
2 Unpacking
This equipment should be unpacked and handled with care. If an item appears to have sustained
damage during shipping, notify the shipper immediately.
Verify that all the parts listed below are included. If an item is missing, contact customer support or
your local representative.
The original packing carton is the safest container to transport the unit, in the event the unit must be
returned for service. Retain the carton and all shipping material for future use.
Please refer to the enclosed CD for more details, to view the detailed User’s Manual, and for
configuration software.
Package Item
Quantity
Network Camera
1
Mounting Template
1
Installation Hardware Pack
1
Expansion Bolts
3
Self-tapping Screws
3
Hex Key
1
Quick Start Guide
1
Documentation CD
1

7
3 Installation and Configuration
3.1 Camera Configuration and Cables
The following figure depicts the type and location of camera controls and cables coming from the
device. This image is intended as a reference only.
Figure 3-1
Camera Components
Ref
Description
1
Dome Enclosure
2
Camera Module
Cable Connections
Ref
Port Name
Connector
Function
1
Video Out
BNC
HDCVI or Analog Video Output
2 Power Input Port Power port, input 12 VDC
Use in accordance with device label
instructions.

8
3.2 Framework and Dimensions
The following figures show the dimensions of the device in mm (in.). These images are intended
as a reference only.
Figure 3-2

9
4 Device Installation
This section details installing the camera to a wall or to a ceiling. Note that the wall or ceiling must be
capable of supporting a minimum of three times the weight of the camera and a bracket (if used).
Warning: DO NOT connect the camera to the power supply during installation.
Warning: For units intended to be installed outdoors: All wiring connecting to the unit must be routed
separately inside a different permanently earthed metal conduits (not supplied).
Warning: Install external interconnecting cables in accordance to NEC, ANSI/NFPA70 (for US
application) and Canadian Electrical Code, Part I, CSA C22.1 (for CAN application) and in
accordance to local country codes for all other countries. Branch circuit protection incorporating a 20
A, 2-pole Listed Circuit Breaker or Branch Rated Fuses are required as part of the building installation.
A readily accessible 2-pole disconnect device with a contact separation of at least 3 mm must be
incorporated.
Warning: DO NOT remove the protective film from the dome until the installation is complete to
protect the dome from distortions from fingerprints, oil, grease or other contaminants.
Note: Dahua recommends attaching a “drip loop” (flex or hard conduit) during installation to ensure
condensation does not form in the mount or the conduit.
Figure 4-1
4.1 Installing the Camera
1. Remove the camera, the mounting template, and the hardware package from the box.
2. Use the hex key, from the hardware pack, to unscrew the three hex bolts screws on the dome
enclosure, and remove the dome enclosure from the camera module. Save the hex bolts.
3. Determine if the cables from the camera will exit through the installation medium or through the
side exit port on the camera module.
4. Apply the mounting template to the installation medium. Pre-drill the three perimeter holes as
marked on the template for the expansion bolts, using a drill bit that is no wider than the
expansion bolt.

10
5. If routing wires through the installation medium, drill the center hole to route the cables from the
camera through the installation medium.
6. Insert an expansion bolt into each pre-drilled perimeter hole.
7. Align the TOP of the camera module to the TOP of the mounting template, then pull the cables
through the installation medium or through the side export port on the camera module.
8. Align the three screw holes in camera module to the three plastic expansion bolt holes in the
installation medium, and then insert a self-tapping screws into each expansion bolts and secure
firmly.
9. Connect the external cables from the camera to the appropriate cables for Ethernet and power.
10. Place the dome cover over the camera and align the holes on the cover to the holes and pedestal.
Insert a hex bolt into each hole and secure the cover to the pedestal with the hex key.
11. Supply power to the camera.

11
5 Setting Camera Parameters
HDCVI technology allows you to set parameters for the camera and to control the camera from a
Dahua HDCVI DVR.
1. Connect the camera to a Dahua HDCVI DVR.
2. From the DVR, select the Main Menu and choose Setting. Then, select the System tab and select
the PTZ link, on the left-side menu.
3. Select the appropriate channel number for the camera.
4. Set CONTROL MODE as HDCVI and set PROTOCOL as HD-CVI.
Figure 5-1
5. Click Save to store the changes.
6. Click the Camera tab at the top of the page.
7. Select the ENCODE link on the left-side menu.
8. Click Save to store the changes.
9. Click the right-mouse button and select PTZ Control. The HDCVI DVR opens the PTZ Setup
menu.
Figure 5-2

12
10. Click the Camera icon to access the Operation Menu.
Figure 5-3
11. Use the following table to access the camera’s menu:
Button
Function
Access the camera’s settings menu.
Select a menu item.
Select a setting value.
Adjust lens zoom and auto trigger function.
Adjust lens focus.
Trigger autofocus at the current zoom factor.

13
Dahua Technology USA Inc.
23 Hubble, Irvine, CA 92618
Tel: [phone]
Fax: [phone]
Email: [email protected]ahuatech.com
Rev 001.001 © 2017 Dahua. All rights reserved. Design and specifications are subject to change without notice.