Dahua ITC114-PH1B User manual

2nd Generation Video Parking Detector User’s Manual
Version 1.0.0
For ITC114-PH1B-F3, ITC114-PH1B-F6,
ITC314-PH1B-F2, ITC314-PH1B-F3

Important Safeguards and Warnings
Please read the following safeguards and warnings carefully before using the product in
order to avoid damages and losses.
Note:
Do not expose the device to lampblack, steam or dust. Otherwise it may cause fire or
electric shock.
Do not install the device at position exposed to sunlight or in high temperature.
Temperature rise in device may cause fire.
Do not expose the device to humid environment. Otherwise it may cause fire.
The device must be installed on solid and flat surface in order to guarantee safety under
load and earthquake. Otherwise, it may cause device to fall off or turnover.
Do not place the device on carpet or quilt.
Do not block air vent of the device or ventilation around the device. Otherwise,
temperature in device will rise and may cause fire.
Do not place any object on the device.
Do not disassemble the device without professional instruction.
Warning:
Please use battery properly to avoid fire, explosion and other dangers.
Please replace used battery with battery of the same type.
Do not use power line other than the one specified. Please use it properly. Otherwise, it
may cause fire or electric shock.
Special Announcement:
This manual is for reference only.
All the designs and software here are subject to change without prior written notice.

If there is any uncertainty or controversy, please refer to the final explanation of us.


i
Table of Contents
Important Safeguards and Warnings ...................................................................................ii
1General Introduction......................................................................................................1
1.1 Product Overview..............................................................................................1
1.2 Features............................................................................................................1
2Framework.....................................................................................................................3
2.1 Product Appearance .........................................................................................3
2.2 Device Dimensions ...........................................................................................3
2.3 Device Structure ...............................................................................................4
2.4 Device Wiring....................................................................................................5
3Installation .....................................................................................................................7
4Quick Configuration Tool...............................................................................................9
4.1 Overview...........................................................................................................9
4.2 Operation..........................................................................................................9
5Web Operation ............................................................................................................12
5.1 Introduction.....................................................................................................12
5.2 System Login..................................................................................................12
5.2.1 Network Connection..................................................................................12
5.2.2 Log in Web................................................................................................12
6Technical Specifications..............................................................................................14
7FAQ.............................................................................................................................16

1
1 General Introduction
1.1 Product Overview
This parking detector is a highly integrative and intelligent product used to detect parking status
and vehicle information.
Via vehicle detection and plate recognition technology, snapshot vehicle picture, recognize
plate number, decide parking status, control parking status indicator.
Via back-end management and operation system, screen, search terminal and etc., achieve
highly efficient parking and vehicle locating, improving user experience for parking and
optimizing parking lot operation efficiency and image.
Parking detector is mainly applied in intelligent parking management system, for parking guide,
vehicle locating system in indoor parking lot.
1.2 Features
Intelligent Recognition
Status detection of occupied parking, vacant parking and automatically snapshot.
Plate recognition and plate cutout.
Non-plate detection, settable sensitivity
Vehicle brand, vehicle color, vehicle size type recognition.
Picture OSD info overlay.
Integration
Integrate dome design and parking indicator, in-ceiling installation for neat parking lot
appearance.
Colorful Indicator
The indicator supports seven colors with brightness adjustable, via video detection to detect
vehicle, recognize plate and trigger parking indicator to show parking status.
Parking status indicator supports remote control, network connection supports indicator color
setup.
Multi-parking Detection
ITC114-PH1B series parking detector supports detection of 1～2 parking at the same time.
ITC314-PH1B series parking detector supports detection of 1～3 parking at the same time.
Intelligent Detection
Support drawing of zone and shielded area.

2
Cascading Network
Support network cascading, recommend device cascading <20 units, cascading network length
<100m.
Width Voltage
Standard voltage 12V, adaptable to DC 8V~DC 26V non-standard voltage.
360-degree Rotation
Lens support 360-degree rotation, angle of pitch supports 90-degree adjustment.
Network Same-Link Connection
Network same-link connection, built-in network bypass function. When device has failure or
outage, the link can provide normal communication.

3
2 Framework
2.1 Product Appearance
Figure 2- 1
Figure 2- 2
2.2 Device Dimensions
Device unit height is 118mm, diameter is 105mm.

4
Figure 2- 3
Figure 2- 4
2.3 Device Structure

5
‘
Figure 2- 5
No.
Component
1
Lens
2
Dome enclosure.
3
Triaxial rotation module.
4
Indicator
2.4 Device Wiring
Cables of the parking detector are shown in Figure 2- 6.

6
Figure 2- 6
No.
Note
1
Network port.
2
Network port.
3
Power port.
1：Connect to +12V power.
2：GND
4
Alarm port.
1：Alarm input
Red：ALARM_IN
Black：ALARM_GND
2：Alarm output
Green：ALARM_OUT
Blue：ALARM_COM
5
RS485 port.
Yellow：RS485A
Orange：RS485B

7
3 Installation
Note:
The installation surface must be able to bear at least 3X of total weight of bracket and
detector.
Step 1. At device installation position, use electric drill to dig one hole with diameter of 35mm on
the bridge
Note:
Screw hole diameter is 33mm.
Figure 3- 1
Step 2. At the position in above figure, pull cable of vehicle parking detector through hole on the
bridge.
Figure 3- 2
Step 3. Take out screw on accessories bag, according to the figure, pull cable through screw,
fixed on bridge.

8
Figure 3- 3
Step 4. Refer to Ch 2.4 for wiring.
Step 5. Adjust camera viewing angle according to actual condition, and then fix the screw.
Step 6. Put back cover.

9
4 Quick Configuration Tool
4.1 Overview
Quick configuration tool can search current IP address, modify IP address. At the same time, you
can use it to upgrade the device.
Please note the tool only applies to the IP addresses in the same segment.
4.2 Operation
Double click the “ConfigTools.exe”icon, you can see an interface is shown as in Figure 4- 1.
In the device list interface, you can view device IP address, port number, subnet mask, default
gateway, MAC address and etc.
Figure 4- 1
Select one IP address and then right click mouse, you can see an interface is shown as in
Figure 4- 2.
Note:
You can set the IP address, subnet mask and gateway for the device. Please note device IP
address and PC IP address shall be in the same network segment if there is no router. Device
default IP address is 192.168.1.108. If there is a router, please set the corresponding gateway
and subnet mask.
The factory default user name is admin and password is admin. For security reasons, please
modify your password after you first login.
For detailed WEB operation, please refer to the Web Operation Manual in the resource CD.

10
Figure 4- 2
Select the “Open Device Web” item; you can go to the corresponding web login interface. See
Figure 4- 3.
Figure 4- 3
If you want to modify the device IP address without logging in the device web interface, you can
go to the configuration tool main interface to set.
In the configuration tool search interface (Figure 4- 1), please select a device IP address and
then double click it to open the login interface. Or you can select an IP address and then click the
Login button to go to the login interface. See Figure 4- 4.
In Figure 4- 4, you can view device IP address, user name, password and port. Please modify
the corresponding information to login.
Please note the port information here shall be identical with the port value you set in TCP port in
Web Network interface. Otherwise, you cannot login the device.
If you are using device background upgrade port 3800 to login, other setups are all invalid.

11
Figure 4- 4
After you logged in, the configuration tool main interface is shown as below. See Figure 4- 5.
Figure 4- 5
For detailed information and operation instruction of the quick configuration tool, please
refer to the Quick Configuration Tool User’s Manual included in the resources CD.

12
5 Web Operation
5.1 Introduction
Device supports access and manage device via WEB from PC.
By configuring device network, camera, intelligent business, a user can monitor and send
HD image.
Search log, auto upgrade, for simplified user management and device maintenance.
5.2 System Login
5.2.1 Network Connection
When parking detector is installed, you must inspect if it is well connected to the Internet or not.
Device default IP address is 192.168.1.108.
Step 1. Set IP address, subnet mask and gateway for PC and parking detector.
If there is no router in the network, please set IP address of PC and parking detector to
same network segment.
If there is router in the network, please set IP address, subnet mask and gateway of PC
and parking detector correspondingly.
Step 2. On PC, ping device IP address, check if device network is normal.
1) On PC select Start>Run.
2) In Run box, input “cmd”, click on OK. System pops up “cmd.exe” command box.
3) In “cmd.exe” box, input “ping xxx.xxx.xxx.xxx”, check if device network is normal.
For example, device IP address is 172.6.5.7, then you input “ping 172.6.5.7” to
check.
It return result “Reply from 172.6.5.7: bytes=32 time<1ms TTL=127”, then device
network is normal.
If return result “Request timed out.”, then device network is abnormal. You shall
check network parameter.
5.2.2 Log in Web
Step 1. In Internet Explorer, input device IP address, press Enter. System shows WEB client-end
page.
If you see a prompt ask you to install “webrec.cab”, you shall follow it.
Step 2. Click Install.
System will automatically install, and upgrade to new version WEB and overwrite older
version.
If the system prohibit the installation, please confirm if there is other plug-in prohibiting
control-unit, and lower IE security level. See Figure 5- 1.

13
Figure 5- 1
Step 3. Input username and password.
Default username is “admin” and password is “admin”. Click on Login. System shows
WEB live interface of parking detector, see Figure 5- 2.
Figure 5- 2
Parking detector WEB client operation refers to its WEB Operation Manual.

14
6 Technical Specifications
Paramete
r Type
Parameter Name
Value
Model
ITC114-PH1B
ITC314-PH1B
Camera
Sensor Type
1/3 inch CMOS
Electronic
Shutter
1/3s～1/10000s，may manually or auto adjust
Day/Night
Electronic color to B/W
White Balance
Auto
Image
Image
Compression
Standard
JPEG
Image
Resolution
1280×960
2304×1296
Video
Paramete
r
Video
Compression
Standard
H.264
Video Bit Stream
1.2Mbps～6Mbps
Video Frame
Rate
N/P standard switch
PAL 1～25 fps
（adjustable）
N 1～30 fps（adjustable）
1 fps～20 fps
Video Resolution
Main stream 1280×960
Sub stream 704×576
Main stream 2304×1296
Sub stream 704×576
Function
Plate
Recognition
Support
Vehicle Parking
Detection
Support，< 3 seconds
Parking Indicator
7 colors, red, yellow, blue, green, cyan, white, pink; inter-
control available
Remote Control
Via WEB remote control
OSD Info
Overlay
Support, may customize time, location, parking no.,
parking status
Network Link
Network same-link connection, built-in network bypass
function, device failure or after outage, link can provide
normal communication
Watermark
Watermark and parity
Record Mode
0～3 pic/vehicle, can set
Interface
Network Port
2，RJ45 10M/100M self-adaptive Ethernet port
RS485 Port
1
Lens Port
M12（3.6 and 6mm lens
optional）
M12（2.8 and 3.6mm lens
optional）
Alarm
Paramete
r
Alarm Output
1-ch
Alarm Input
1-ch
General
Power
Standard DC 12V, range 8V～26V
Consumption
< 6W
Work
Temperature
﹣30℃～﹢60℃

15
Paramete
r Type
Parameter Name
Value
Model
ITC114-PH1B
ITC314-PH1B
Work Humidity
10%～90%
Dimensions
Ø 105mm×118mm
Weight
0.5kg
Installation
Dome design, in-ceiling bridge mount

16
7 FAQ
Bug
Solution
I cannot boot up
the device.
Possible cause:
1. Incorrect input power.
2. Poor contact of power line.
3. Bad power adaptor.
4. Program upgrading error.
Device auto
reboots or crash
after boot up
Possible cause:
1. Unstable input voltage or low voltage.
2. Insufficient ON/OFF power.
3. HDD failure of camera
Real-time image
problem.
Possible cause:
1. Incorrect parameter config of camera.
2. Image sensor HDD failure
Local monitoring
video or snapshot
blur
Possible cause:
1. Image quality too low.
2. HDD failure.
Wrong time
Possible cause:
1. Setup error.
2. Bad contact of battery or low voltage.
3. Bad crystal oscillator
I cannot login WEB
or client.
Possible cause:
1. WEB control unit is not installed correctly, please follow user’s
manual to re-install.
2. ActiveX control is blocked.
3. Network connection failure.
4. Network setup error.
5. Wrong username or password.
6. Client WEB control and camera version not match. Please clear
the config.
Unstable network
connection
Possible cause:
1. Unstable network.
2. IP address conflict.
3. MAC address conflict.
I cannot play
download file.
Possible cause:
1. No player installed.
2. Player version is wrong, please install player in the attached
disk.
Forget network
password
Please contact your local customer service.

17
Bug
Solution
I cannot login via
Internet.
Possible cause:
1. The connected user exceeds the limit.
2. Your IP does not meet requirements in device Black/White list.
Note:
This manual is for reference only. Slight difference may be found in the user
interface.
All the designs and software here are subject to change without prior written
notice.
All trademarks and registered trademarks mentioned are the properties of their
respective owners.
If there is any uncertainty or controversy, please refer to the final explanation of us.
Please visit our website or contact your local retailer for more information.