Dahua AR DH-AR306-E Operating and maintenance manual

Dahua AR DH-AR306-E Enterprise Router Installation
Quick Start-AP100 BOM: 3122A0K9
Tool list
Installation accessories
The installation tools are not provided with the router. Prepare them yourself
as required.
Wear an ESD wrist strap, and make sure the wrist strap makes good skin
contact and is reliably grounded.
Wall-mounting the router
• When you mount the router on a wall, make sure the Ethernet ports face
downwards and the two sides with ventilation holes are perpendicular to
the ground.
• The screw anchors are compatible with the screws.
Flathead
screwdriver
Phillips
screwdriver
Wire-stripping
pliers
Diagonal
pliers
ESD wrist
strap
Heat gun Rubber
hammer
Drill Ruler Marker
Ring terminal Rubber feet Cage nut
(user supplied)
Wall anchor and
screw
(user supplied)
Mounting brackets
and screws
(optional)
3 mm ≤ Ф ≤ 3. 5 mm
(0.12 in ≤ Ф ≤ 0. 14 in)
≥ 16 mm (0. 63 in)
6 mm ≤ Ф ≤ 8 mm
(0.24 in ≤ Ф ≤ 0. 31 in)
160 mm
(6.30 in)
34
≥ 22 mm
(0.87 in)
12
≥1.5mm
(0.06 in)

Rack-mounting the router
Install cage nuts.
Attach the rubber feet to the router bottom. Then place the router on the
workbench upside up.
Workbench-mounting the router
Attach the mounting brackets to the router.
Mount the router in the rack.
No mounting brackets or screws are provided with the router. Purchase
them yourself.
56

Remove the micro SD card slot cover, insert the card into the slot, and reinstall
the cover.
Installing a micro SD card
Connecting the grounding cable to the router
Correctly connecting the grounding cable is crucial to lightning protection
and EMI protection. Attach the ring terminal provided with the router to the
grounding cable. Make sure the grounding cable is reliably grounded.
Connecting the power adapter
Connecting an Ethernet cable
• Before connecting the power adapter, make sure the router is reliably
grounded.
• To avoid bodily injury, first connect the power adapter to the router and
then to the equipment-room power supply system.
1 2
1 2 3

Connecting the router to a configuration terminal by
using the console cable
Copyright © 2021, Dahua Technology Co., Ltd. All rights reserved.