Daikin Altherma 3 R F How to use

Installer reference guide
Daikin Altherma 3 R F
ERGA04DAV3(A)
ERGA06DAV3(A)
ERGA08DAV3(A)
EHVZ04S18DA6V7
EHVZ08S18DA6V7
EHVZ08S23DA6V7
EHVZ08S18DA9W7
EHVZ08S23DA9W7

Table of contents
Installer reference guide
2
ERGA04~08DAV3(A) + EHVZ04+08S18+23DA6V+9W7
Daikin Altherma 3 R F
4P618957-1 – 2020.03
Table of contents
1 General safety precautions 6
1.1 About the documentation .............................................................................................................................................. 6
1.1.1 Meaning of warnings and symbols ................................................................................................................ 6
1.2 For the installer............................................................................................................................................................... 7
1.2.1 General ........................................................................................................................................................... 7
1.2.2 Installation site ............................................................................................................................................... 8
1.2.3 Refrigerant...................................................................................................................................................... 8
1.2.4 Brine................................................................................................................................................................ 10
1.2.5 Water .............................................................................................................................................................. 11
1.2.6 Electrical ......................................................................................................................................................... 11
2 About the documentation 13
2.1 About this document ...................................................................................................................................................... 13
2.2 Installer reference guide at a glance .............................................................................................................................. 13
3 About the box 15
3.1 Overview: About the box ................................................................................................................................................ 15
3.2 Outdoor unit ................................................................................................................................................................... 15
3.2.1 To unpack the outdoor unit ........................................................................................................................... 15
3.2.2 To handle the outdoor unit............................................................................................................................ 15
3.2.3 To remove the accessories from the outdoor unit........................................................................................ 16
3.3 Indoor unit ...................................................................................................................................................................... 17
3.3.1 To unpack the indoor unit.............................................................................................................................. 17
3.3.2 To remove the accessories from the indoor unit .......................................................................................... 17
3.3.3 To handle the indoor unit............................................................................................................................... 17
4 About the units and options 18
4.1 Overview: About the units and options.......................................................................................................................... 18
4.2 Identification ................................................................................................................................................................... 18
4.2.1 Identification label: Outdoor unit .................................................................................................................. 18
4.2.2 Identification label: Indoor unit ..................................................................................................................... 19
4.3 Combining units and options.......................................................................................................................................... 19
4.3.1 Possible options for the outdoor unit............................................................................................................ 19
4.3.2 Possible options for the indoor unit............................................................................................................... 20
4.3.3 Possible combinations of indoor unit and outdoor unit................................................................................ 22
5 Application guidelines 23
5.1 Overview: Application guidelines ................................................................................................................................... 23
5.2 Setting up the space heating system.............................................................................................................................. 23
5.2.1 Multiple rooms – TwoLWT zones.................................................................................................................. 24
5.3 Setting up the domestic hot water tank......................................................................................................................... 26
5.3.1 System layout – Integrated DHW tank........................................................................................................... 26
5.3.2 Selecting the volume and desired temperature for the DHW tank .............................................................. 26
5.3.3 Setup and configuration – DHW tank ............................................................................................................ 28
5.3.4 DHW pump for instant hot water .................................................................................................................. 28
5.3.5 DHW pump for disinfection ........................................................................................................................... 29
5.4 Setting up the energy metering...................................................................................................................................... 29
5.4.1 Produced heat ................................................................................................................................................ 30
5.4.2 Consumed energy........................................................................................................................................... 30
5.4.3 Normal kWh rate power supply ..................................................................................................................... 30
5.4.4 Preferential kWh rate power supply.............................................................................................................. 32
5.5 Setting up the power consumption control ................................................................................................................... 33
5.5.1 Permanent power limitation.......................................................................................................................... 33
5.5.2 Power limitation activated by digital inputs .................................................................................................. 33
5.5.3 Power limitation process................................................................................................................................ 35
5.6 Setting up an external temperature sensor ................................................................................................................... 35
6 Preparation 37
6.1 Overview: Preparation.................................................................................................................................................... 37
6.2 Preparing the installation site......................................................................................................................................... 37
6.2.1 Installation site requirements of the outdoor unit........................................................................................ 37
6.2.2 Additional installation site requirements of the outdoor unit in cold climates............................................ 40
6.2.3 Installation site requirements of the indoor unit .......................................................................................... 41
6.3 Preparing refrigerant piping ........................................................................................................................................... 44
6.3.1 Refrigerant piping requirements.................................................................................................................... 44
6.3.2 Refrigerant piping insulation.......................................................................................................................... 44

Table of contents
Installer reference guide
3
ERGA04~08DAV3(A) + EHVZ04+08S18+23DA6V+9W7
Daikin Altherma 3 R F
4P618957-1 – 2020.03
6.4 Preparing water piping ................................................................................................................................................... 44
6.4.1 Water circuit requirements............................................................................................................................ 45
6.4.2 Formula to calculate the expansion vessel pre-pressure.............................................................................. 47
6.4.3 To check the water volume and flow rate ..................................................................................................... 47
6.4.4 Changing the pre-pressure of the expansion vessel...................................................................................... 49
6.4.5 To check the water volume: Examples .......................................................................................................... 50
6.5 Preparing electrical wiring .............................................................................................................................................. 50
6.5.1 About preparing electrical wiring................................................................................................................... 50
6.5.2 About preferential kWh rate power supply................................................................................................... 51
6.5.3 Overview of electrical connections except external actuators ..................................................................... 52
6.5.4 Overview of electrical connections for external and internal actuators....................................................... 52
7 Installation 55
7.1 Overview: Installation ..................................................................................................................................................... 55
7.2 Opening the units ........................................................................................................................................................... 55
7.2.1 About opening the units................................................................................................................................. 55
7.2.2 To open the outdoor unit............................................................................................................................... 55
7.2.3 To open the indoor unit ................................................................................................................................. 56
7.2.4 To lower the switch box on the indoor unit .................................................................................................. 58
7.3 Mounting the outdoor unit............................................................................................................................................. 59
7.3.1 About mounting the outdoor unit ................................................................................................................. 59
7.3.2 Precautions when mounting the outdoor unit.............................................................................................. 59
7.3.3 To provide the installation structure ............................................................................................................. 59
7.3.4 To install the outdoor unit ............................................................................................................................. 62
7.3.5 To provide drainage........................................................................................................................................ 63
7.3.6 To prevent the outdoor unit from falling over .............................................................................................. 64
7.4 Mounting the indoor unit ............................................................................................................................................... 65
7.4.1 About mounting the indoor unit.................................................................................................................... 65
7.4.2 Precautions when mounting the indoor unit................................................................................................. 65
7.4.3 To install the indoor unit ................................................................................................................................ 65
7.4.4 To connect the drain hose to the drain ......................................................................................................... 66
7.5 Connecting the refrigerant piping .................................................................................................................................. 67
7.5.1 About connecting the refrigerant piping ....................................................................................................... 67
7.5.2 Precautions when connecting the refrigerant piping.................................................................................... 67
7.5.3 Guidelines when connecting the refrigerant piping...................................................................................... 68
7.5.4 Pipe bending guidelines ................................................................................................................................. 69
7.5.5 To flare the pipe end ...................................................................................................................................... 69
7.5.6 To braze the pipe end..................................................................................................................................... 70
7.5.7 Using the stop valve and service port............................................................................................................ 70
7.5.8 To connect the refrigerant piping to the outdoor unit ................................................................................. 72
7.5.9 To connect the refrigerant piping to the indoor unit .................................................................................... 72
7.6 Checking the refrigerant piping...................................................................................................................................... 73
7.6.1 About checking the refrigerant piping........................................................................................................... 73
7.6.2 Precautions when checking the refrigerant piping........................................................................................ 73
7.6.3 To check for leaks ........................................................................................................................................... 74
7.6.4 To perform vacuum drying............................................................................................................................. 74
7.7 Charging refrigerant........................................................................................................................................................ 75
7.7.1 About charging refrigerant............................................................................................................................. 75
7.7.2 Precautions when charging refrigerant ......................................................................................................... 76
7.7.3 To determine the additional refrigerant amount.......................................................................................... 76
7.7.4 To determine the complete recharge amount.............................................................................................. 77
7.7.5 To charge additional refrigerant .................................................................................................................... 77
7.7.6 To fix the fluorinated greenhouse gases label............................................................................................... 77
7.8 Connecting water piping................................................................................................................................................. 78
7.8.1 About connecting the water piping ............................................................................................................... 78
7.8.2 Precautions when connecting the water piping............................................................................................ 78
7.8.3 To connect the water piping .......................................................................................................................... 78
7.8.4 To connect the recirculation piping ............................................................................................................... 80
7.8.5 To fill the water circuit ................................................................................................................................... 80
7.8.6 To fill the domestic hot water tank................................................................................................................ 81
7.8.7 To insulate the water piping .......................................................................................................................... 81
7.9 Connecting the electrical wiring..................................................................................................................................... 81
7.9.1 About connecting the electrical wiring.......................................................................................................... 81
7.9.2 About electrical compliance........................................................................................................................... 82
7.9.3 Precautions when connecting the electrical wiring....................................................................................... 82
7.9.4 Guidelines when connecting the electrical wiring......................................................................................... 82
7.9.5 Specifications of standard wiring components.............................................................................................. 83
7.9.6 To connect the electrical wiring to the outdoor unit .................................................................................... 83
7.9.7 To connect the electrical wiring to the indoor unit....................................................................................... 85
7.9.8 To connect the main power supply................................................................................................................ 86

Table of contents
Installer reference guide
4
ERGA04~08DAV3(A) + EHVZ04+08S18+23DA6V+9W7
Daikin Altherma 3 R F
4P618957-1 – 2020.03
7.9.9 To connect the backup heater power supply ................................................................................................ 88
7.9.10 To connect the shut-off valve ........................................................................................................................ 90
7.9.11 To connect the electricity meters .................................................................................................................. 90
7.9.12 To connect the domestic hot water pump .................................................................................................... 91
7.9.13 To connect the alarm output ......................................................................................................................... 91
7.9.14 To connect the space heating ON/OFF output.............................................................................................. 91
7.9.15 To connect the changeover to external heat source..................................................................................... 92
7.9.16 To connect the power consumption digital inputs........................................................................................ 92
7.9.17 To connect the safety thermostat (normally closed contact) ....................................................................... 93
7.10 Finishing the outdoor unit installation ........................................................................................................................... 94
7.10.1 To finish the outdoor unit installation ........................................................................................................... 94
7.11 Finishing the indoor unit installation.............................................................................................................................. 95
7.11.1 To close the indoor unit ................................................................................................................................. 95
8 Configuration 96
8.1 Overview: Configuration................................................................................................................................................. 96
8.1.1 To access the most used commands ............................................................................................................. 96
8.2 Configuration wizard....................................................................................................................................................... 98
8.3 Possible screens .............................................................................................................................................................. 99
8.3.1 Possible screens: Overview ............................................................................................................................ 99
8.3.2 Home screen................................................................................................................................................... 100
8.3.3 Main menu screen.......................................................................................................................................... 101
8.3.4 Menu screen................................................................................................................................................... 103
8.3.5 Setpoint screen............................................................................................................................................... 103
8.3.6 Detailed screen with values ........................................................................................................................... 104
8.3.7 Schedule screen: Example.............................................................................................................................. 104
8.4 Weather-dependent curve ............................................................................................................................................. 108
8.4.1 What is a weather-dependent curve? ........................................................................................................... 108
8.4.2 2-points curve................................................................................................................................................. 109
8.4.3 Slope-offset curve........................................................................................................................................... 110
8.4.4 Using weather-dependent curves.................................................................................................................. 111
8.5 Settings menu ................................................................................................................................................................. 113
8.5.1 Malfunctioning ............................................................................................................................................... 113
8.5.2 Room............................................................................................................................................................... 114
8.5.3 Main zone ....................................................................................................................................................... 117
8.5.4 Additional zone............................................................................................................................................... 124
8.5.5 Space heating ................................................................................................................................................. 127
8.5.6 Tank................................................................................................................................................................. 132
8.5.7 User settings ................................................................................................................................................... 138
8.5.8 Information..................................................................................................................................................... 142
8.5.9 Installer settings ............................................................................................................................................. 143
8.6 Menu structure: Overview user settings........................................................................................................................ 160
8.7 Menu structure: Overview installer settings.................................................................................................................. 161
9 Commissioning 162
9.1 Overview: Commissioning .............................................................................................................................................. 162
9.2 Precautions when commissioning.................................................................................................................................. 162
9.3 Checklist before commissioning..................................................................................................................................... 162
9.4 Checklist during commissioning ..................................................................................................................................... 163
9.4.1 To check the minimum flow rate ................................................................................................................... 164
9.4.2 Air purge function........................................................................................................................................... 164
9.4.3 To perform an operation test run.................................................................................................................. 166
9.4.4 To perform an actuator test run .................................................................................................................... 167
9.4.5 Underfloor heating screed dryout ................................................................................................................. 168
10 Hand-over to the user 172
11 Maintenance and service 173
11.1 Overview: Maintenance and service .............................................................................................................................. 173
11.2 Maintenance safety precautions .................................................................................................................................... 173
11.3 Checklist for yearly maintenance of the outdoor unit................................................................................................... 173
11.4 Checklist for yearly maintenance of the indoor unit ..................................................................................................... 173
11.4.1 To drain the domestic hot water tank ........................................................................................................... 176
11.5 About cleaning the water filter in case of trouble ......................................................................................................... 177
11.5.1 To remove the water filter ............................................................................................................................. 177
11.5.2 To clean the water filter in case of trouble.................................................................................................... 178
11.5.3 To install the water filter ................................................................................................................................ 179
12 Troubleshooting 180
12.1 Overview: Troubleshooting ............................................................................................................................................ 180
12.2 Precautions when troubleshooting ................................................................................................................................ 180

Table of contents
Installer reference guide
5
ERGA04~08DAV3(A) + EHVZ04+08S18+23DA6V+9W7
Daikin Altherma 3 R F
4P618957-1 – 2020.03
12.3 Solving problems based on symptoms........................................................................................................................... 181
12.3.1 Symptom: The unit is NOT heating as expected............................................................................................ 181
12.3.2 Symptom: The compressor does NOT start (space heating or domestic water heating) ............................ 182
12.3.3 Symptom: The system is making gurgling noises after commissioning ........................................................ 182
12.3.4 Symptom: The pump is making noise (cavitation)......................................................................................... 183
12.3.5 Symptom: The pressure relief valve opens.................................................................................................... 183
12.3.6 Symptom: The water pressure relief valve leaks........................................................................................... 184
12.3.7 Symptom: The space is NOT sufficiently heated at low outdoor temperatures........................................... 184
12.3.8 Symptom: The pressure at the tapping point is temporarily unusually high................................................ 185
12.3.9 Symptom: Decoration panels are pushed away due to a swollen tank ........................................................ 185
12.3.10 Symptom: Tank disinfection function is NOT completed correctly (AH-error)............................................. 185
12.4 Solving problems based on error codes ......................................................................................................................... 186
12.4.1 To display the help text in case of a malfunction .......................................................................................... 186
12.4.2 Error codes: Overview .................................................................................................................................... 187
13 Disposal 191
13.1 Overview: Disposal.......................................................................................................................................................... 191
13.2 To pump down ................................................................................................................................................................ 191
13.3 To start and stop forced cooling..................................................................................................................................... 192
14 Technical data 194
14.1 Piping diagram: Outdoor unit ......................................................................................................................................... 194
14.2 Piping diagram: Indoor unit ............................................................................................................................................ 195
14.3 Wiring diagram: Outdoor unit ........................................................................................................................................ 197
14.4 Wiring diagram: Indoor unit ........................................................................................................................................... 199
14.5 Table 1 – Maximum refrigerant charge allowed in a room: indoor unit ....................................................................... 205
14.6 Table 2 – Minimum floor area: indoor unit.................................................................................................................... 206
14.7 Table 3 – Minimum venting opening area for natural ventilation: indoor unit ............................................................ 206
14.8 ESP curve: Indoor unit..................................................................................................................................................... 208
15 Glossary 209
16 Field settings table 211

1 | General safety precautions
Installer reference guide
6
ERGA04~08DAV3(A) + EHVZ04+08S18+23DA6V+9W7
Daikin Altherma 3 R F
4P618957-1 – 2020.03
1 General safety precautions
1.1 About the documentation
▪The original documentation is written in English. All other languages are
translations.
▪The precautions described in this document cover very important topics, follow
them carefully.
▪The installation of the system, and all activities described in the installation
manual and in the installer reference guide MUST be performed by an authorised
installer.
1.1.1 Meaning of warnings and symbols
DANGER
Indicates a situation that results in death or serious injury.
DANGER: RISK OF ELECTROCUTION
Indicates a situation that could result in electrocution.
DANGER: RISK OF BURNING
Indicates a situation that could result in burning because of extreme hot or cold
temperatures.
DANGER: RISK OF EXPLOSION
Indicates a situation that could result in explosion.
WARNING
Indicates a situation that could result in death or serious injury.
WARNING: FLAMMABLE MATERIAL
CAUTION
Indicates a situation that could result in minor or moderate injury.
NOTICE
Indicates a situation that could result in equipment or property damage.
INFORMATION
Indicates useful tips or additional information.
Symbols used on the unit:

1 | General safety precautions
Installer reference guide
7
ERGA04~08DAV3(A) + EHVZ04+08S18+23DA6V+9W7
Daikin Altherma 3 R F
4P618957-1 – 2020.03
Symbol Explanation
Before installation, read the installation and operation
manual, and the wiring instruction sheet.
Before performing maintenance and service tasks, read the
service manual.
For more information, see the installer and user reference
guide.
The unit contains rotating parts. Be careful when servicing or
inspecting the unit.
Symbols used in the documentation:
Symbol Explanation
Indicates a figure title or a reference to it.
Example: " 1–3 Figure title" means "Figure 3 in chapter 1".
Indicates a table title or a reference to it.
Example: " 1–3 Table title" means "Table 3 in chapter 1".
1.2 For the installer
1.2.1 General
If you are NOT sure how to install or operate the unit, contact your dealer.
DANGER: RISK OF BURNING
▪Do NOT touch the refrigerant piping, water piping or internal parts during and
immediately after operation. It could be too hot or too cold. Give it time to return
to normal temperature. If you must touch it, wear protective gloves.
▪Do NOT touch any accidental leaking refrigerant.
WARNING
Improper installation or attachment of equipment or accessories could result in
electrical shock, short-circuit, leaks, fire or other damage to the equipment. Only use
accessories, optional equipment and spare parts made or approved by Daikin.
WARNING
Make sure installation, testing and applied materials comply with applicable
legislation (on top of the instructions described in the Daikin documentation).
CAUTION
Wear adequate personal protective equipment (protective gloves, safety glasses,…)
when installing, maintaining or servicing the system.
WARNING
Tear apart and throw away plastic packaging bags so that nobody, especially
children, can play with them. Possible risk: suffocation.

1 | General safety precautions
Installer reference guide
8
ERGA04~08DAV3(A) + EHVZ04+08S18+23DA6V+9W7
Daikin Altherma 3 R F
4P618957-1 – 2020.03
WARNING
Provide adequate measures to prevent that the unit can be used as a shelter by small
animals. Small animals that make contact with electrical parts can cause
malfunctions, smoke or fire.
CAUTION
Do NOT touch the air inlet or aluminium fins of the unit.
CAUTION
▪Do NOT place any objects or equipment on top of the unit.
▪Do NOT sit, climb or stand on the unit.
NOTICE
Works executed on the outdoor unit are best done under dry weather conditions to
avoid water ingress.
In accordance with the applicable legislation, it might be necessary to provide a
logbook with the product containing at least: information on maintenance, repair
work, results of tests, stand-by periods,…
Also, at least, following information MUST be provided at an accessible place at the
product:
▪Instructions for shutting down the system in case of an emergency
▪Name and address of fire department, police and hospital
▪Name, address and day and night telephone numbers for obtaining service
In Europe, EN378 provides the necessary guidance for this logbook.
1.2.2 Installation site
▪Provide sufficient space around the unit for servicing and air circulation.
▪Make sure the installation site withstands the weight and vibration of the unit.
▪Make sure the area is well ventilated. Do NOT block any ventilation openings.
▪Make sure the unit is level.
Do NOT install the unit in the following places:
▪In potentially explosive atmospheres.
▪In places where there is machinery that emits electromagnetic waves.
Electromagnetic waves may disturb the control system, and cause malfunction of
the equipment.
▪In places where there is a risk of fire due to the leakage of flammable gases
(example: thinner or gasoline), carbon fibre, ignitable dust.
▪In places where corrosive gas (example: sulphurous acid gas) is produced.
Corrosion of copper pipes or soldered parts may cause the refrigerant to leak.
1.2.3 Refrigerant
If applicable. See the installation manual or installer reference guide of your
application for more information.

1 | General safety precautions
Installer reference guide
9
ERGA04~08DAV3(A) + EHVZ04+08S18+23DA6V+9W7
Daikin Altherma 3 R F
4P618957-1 – 2020.03
NOTICE
Make sure refrigerant piping installation complies with applicable legislation. In
Europe, EN378 is the applicable standard.
NOTICE
Make sure the field piping and connections are NOT subjected to stress.
WARNING
During tests, NEVER pressurize the product with a pressure higher than the
maximum allowable pressure (as indicated on the nameplate of the unit).
WARNING
Take sufficient precautions in case of refrigerant leakage. If refrigerant gas leaks,
ventilate the area immediately. Possible risks:
▪Excessive refrigerant concentrations in a closed room can lead to oxygen
deficiency.
▪In case of R410A or R32 refrigerant: Toxic gas might be produced if refrigerant
gas comes into contact with fire.
▪In case of CO2 refrigerant: Refrigerant gas is toxic in high concentrations.
DANGER: RISK OF EXPLOSION
Pump down – Refrigerant leakage. If you want to pump down the system, and there
is a leak in the refrigerant circuit:
▪Do NOT use the unit's automatic pump down function, with which you can collect
all refrigerant from the system into the outdoor unit. Possible consequence: Self-
combustion and explosion of the compressor because of air going into the
operating compressor.
▪Use a separate recovery system so that the unit's compressor does NOT have to
operate.
WARNING
ALWAYS recover the refrigerant. Do NOT release them directly into the environment.
Use a vacuum pump to evacuate the installation.
NOTICE
After all the piping has been connected, make sure there is no gas leak. Use nitrogen
to perform a gas leak detection.
NOTICE
▪To avoid compressor breakdown, do NOT charge more than the specified amount
of refrigerant.
▪When the refrigerant system is to be opened, refrigerant MUST be treated
according to the applicable legislation.
WARNING
Make sure there is no oxygen in the system. Refrigerant may only be charged after
performing the leak test and the vacuum drying.
Possible consequence: Self-combustion and explosion of the compressor because of
oxygen going into the operating compressor.

1 | General safety precautions
Installer reference guide
10
ERGA04~08DAV3(A) + EHVZ04+08S18+23DA6V+9W7
Daikin Altherma 3 R F
4P618957-1 – 2020.03
▪In case recharge is required, see the nameplate of the unit. It states the type of
refrigerant and necessary amount.
▪The unit is factory charged with refrigerant and depending on pipe sizes and pipe
lengths some systems require additional charging of refrigerant.
▪Only use tools exclusively for the refrigerant type used in the system, this to
ensure pressure resistance and prevent foreign materials from entering into the
system.
▪Charge the liquid refrigerant as follows:
If Then
A siphon tube is present
(i.e., the cylinder is marked with "Liquid
filling siphon attached")
Charge with the cylinder upright.
A siphon tube is NOT present Charge with the cylinder upside down.
▪Open refrigerant cylinders slowly.
▪Charge the refrigerant in liquid form. Adding it in gas form may prevent normal
operation.
CAUTION
When the refrigerant charging procedure is done or when pausing, close the valve of
the refrigerant tank immediately. If the valve is NOT closed immediately, remaining
pressure might charge additional refrigerant. Possible consequence: Incorrect
refrigerant amount.
1.2.4 Brine
If applicable. See the installation manual or installer reference guide of your
application for more information.
WARNING
The selection of the brine MUST be in accordance with the applicable legislation.
WARNING
Take sufficient precautions in case of brine leakage. If brine leaks, ventilate the area
immediately and contact your local dealer.
WARNING
The ambient temperature inside the unit can get much higher than that of the room,
e.g. 70°C. In case of a brine leak, hot parts inside the unit can create a hazardous
situation.
WARNING
The use and installation of the application MUST comply with the safety and
environmental precautions specified in the applicable legislation.

1 | General safety precautions
Installer reference guide
11
ERGA04~08DAV3(A) + EHVZ04+08S18+23DA6V+9W7
Daikin Altherma 3 R F
4P618957-1 – 2020.03
1.2.5 Water
If applicable. See the installation manual or installer reference guide of your
application for more information.
NOTICE
Make sure water quality complies with EU directive 98/83EC.
1.2.6 Electrical
DANGER: RISK OF ELECTROCUTION
▪Turn OFF all power supply before removing the switch box cover, connecting
electrical wiring or touching electrical parts.
▪Disconnect the power supply for more than 1minute, and measure the voltage at
the terminals of main circuit capacitors or electrical components before servicing.
The voltage MUST be less than 50 V DC before you can touch electrical
components. For the location of the terminals, see the wiring diagram.
▪Do NOT touch electrical components with wet hands.
▪Do NOT leave the unit unattended when the service cover is removed.
WARNING
If NOT factory installed, a main switch or other means for disconnection, having a
contact separation in all poles providing full disconnection under overvoltage
categoryIII condition, MUST be installed in the fixed wiring.
WARNING
▪ONLY use copper wires.
▪Make sure the field wiring complies with the applicable legislation.
▪All field wiring MUST be performed in accordance with the wiring diagram
supplied with the product.
▪NEVER squeeze bundled cables and make sure they do NOT come in contact with
the piping and sharp edges. Make sure no external pressure is applied to the
terminal connections.
▪Make sure to install earth wiring. Do NOT earth the unit to a utility pipe, surge
absorber, or telephone earth. Incomplete earth may cause electrical shock.
▪Make sure to use a dedicated power circuit. NEVER use a power supply shared by
another appliance.
▪Make sure to install the required fuses or circuit breakers.
▪Make sure to install an earth leakage protector. Failure to do so may cause
electrical shock or fire.
▪When installing the earth leakage protector, make sure it is compatible with the
inverter (resistant to high frequency electric noise) to avoid unnecessary opening
of the earth leakage protector.

1 | General safety precautions
Installer reference guide
12
ERGA04~08DAV3(A) + EHVZ04+08S18+23DA6V+9W7
Daikin Altherma 3 R F
4P618957-1 – 2020.03
CAUTION
▪When connecting the power supply: connect the earth cable first, before making
the current-carrying connections.
▪When disconnecting the power supply: disconnect the current-carrying cables
first, before separating the earth connection.
▪The length of the conductors between the power supply stress relief and the
terminal block itself must be as such that the current-carrying wires are tautened
before the earth wire is in case the power supply is pulled loose from the stress
relief.
NOTICE
Precautions when laying power wiring:
▪Do NOT connect wiring of different thicknesses to the power terminal block (slack
in the power wiring may cause abnormal heat).
▪When connecting wiring which is the same thickness, do as shown in the figure
above.
▪For wiring, use the designated power wire and connect firmly, then secure to
prevent outside pressure being exerted on the terminal board.
▪Use an appropriate screwdriver for tightening the terminal screws. A screwdriver
with a small head will damage the head and make proper tightening impossible.
▪Over-tightening the terminal screws may break them.
Install power cables at least 1 m away from televisions or radios to prevent
interference. Depending on the radio waves, a distance of 1 m may not be
sufficient.
WARNING
▪After finishing the electrical work, confirm that each electrical component and
terminal inside the electrical components box is connected securely.
▪Make sure all covers are closed before starting up the unit.
NOTICE
Only applicable if the power supply is three‑phase, and the compressor has an ON/
OFF starting method.
If there exists the possibility of reversed phase after a momentary black out and the
power goes on and off while the product is operating, attach a reversed phase
protection circuit locally. Running the product in reversed phase can break the
compressor and other parts.

2 | About the documentation
Installer reference guide
13
ERGA04~08DAV3(A) + EHVZ04+08S18+23DA6V+9W7
Daikin Altherma 3 R F
4P618957-1 – 2020.03
2 About the documentation
2.1 About this document
Target audience
Authorised installers
Documentation set
This document is part of a documentation set. The complete set consists of:
▪General safety precautions:
-Safety instructions that you must read before installing
-Format: Paper (in the box of the indoor unit)
▪Indoor unit installation manual:
-Installation instructions
-Format: Paper (in the box of the indoor unit)
▪Outdoor unit installation manual:
-Installation instructions
-Format: Paper (in the box of the outdoor unit)
▪Installer reference guide:
-Preparation of the installation, good practices, reference data,…
-Format: Digital files on http://www.daikineurope.com/support-and-manuals/
product-information/
▪Addendum book for optional equipment:
-Additional info about how to install optional equipment
-Format: Paper (in the box of the indoor unit) + Digital files on http://
www.daikineurope.com/support-and-manuals/product-information/
Latest revisions of the supplied documentation may be available on the regional
Daikin website or via your dealer.
The original documentation is written in English. All other languages are
translations.
Technical engineering data
▪A subset of the latest technical data is available on the regional Daikin website
(publicly accessible).
▪The full set of latest technical data is available on the Daikin Business Portal
(authentication required).
2.2 Installer reference guide at a glance
Chapter Description
General safety precautions Safety instructions that you must read before
installing
About the documentation What documentation exists for the installer

2 | About the documentation
Installer reference guide
14
ERGA04~08DAV3(A) + EHVZ04+08S18+23DA6V+9W7
Daikin Altherma 3 R F
4P618957-1 – 2020.03
Chapter Description
About the box How to unpack the units and remove their
accessories
About the units and options ▪How to identify the units
▪Possible combinations of units and options
Application guidelines Various installation setups of the system
Preparation What to do and know before going on‑site
Installation What to do and know to install the system
Configuration What to do and know to configure the system
after it is installed
Commissioning What to do and know to commission the system
after it is configured
Hand‑over to the user What to give and explain to the user
Maintenance and service How to maintain and service the units
Troubleshooting What to do in case of problems
Disposal How to dispose of the system
Technical data Specifications of the system
Glossary Definition of terms
Field settings table Table to be filled in by the installer, and kept for
future reference
Note: There is also an installer settings table in
the user reference guide. This table has to be
filled in by the installer and handed over to the
user.

3 | About the box
Installer reference guide
15
ERGA04~08DAV3(A) + EHVZ04+08S18+23DA6V+9W7
Daikin Altherma 3 R F
4P618957-1 – 2020.03
3 About the box
3.1 Overview: About the box
This chapter describes what you have to do after the boxes with the outdoor and
indoor unit are delivered on-site.
Keep the following in mind:
▪At delivery, the unit MUST be checked for damage. Any damage MUST be
reported immediately to the claims agent of the carrier.
▪Bring the packed unit as close as possible to its final installation position to
prevent damage during transport.
▪Prepare the path along which you want to bring the unit inside in advance.
3.2 Outdoor unit
3.2.1 To unpack the outdoor unit
1 2
3.2.2 To handle the outdoor unit
CAUTION
To avoid injury, do NOT touch the air inlet or aluminium fins of the unit.
1Handle the unit using the sling to the left and the handle to the right. Pull up
both sides of the sling at the same time to prevent disconnection of the sling
from the unit.

3 | About the box
Installer reference guide
16
ERGA04~08DAV3(A) + EHVZ04+08S18+23DA6V+9W7
Daikin Altherma 3 R F
4P618957-1 – 2020.03
2
1
1
2While handling the unit:
▪Keep both sides of the sling level.
▪Keep your back straight.
3After mounting the unit, remove the sling from the unit by pulling 1 side of the
sling.
3.2.3 To remove the accessories from the outdoor unit
1Lift the outdoor unit. See "3.2.2To handle the outdoor unit"[415].
2Remove the accessories at the bottom of the package.
ENERG IJAY
IAIE
ENERG IJAY
IAIE
1×1× 1× 1× 2× 1×
da b c e f
aOutdoor unit installation manual
bFluorinated greenhouse gases label
cMultilingual fluorinated greenhouse gases label
dEnergy label
eUnit mounting plate
fBolts, nuts, washers, spring washers and wire clamp

3 | About the box
Installer reference guide
17
ERGA04~08DAV3(A) + EHVZ04+08S18+23DA6V+9W7
Daikin Altherma 3 R F
4P618957-1 – 2020.03
3.3 Indoor unit
3.3.1 To unpack the indoor unit
1 2
8×
3.3.2 To remove the accessories from the indoor unit
4×
6×
1×
4× 1×
1× 1× 1× 1×
a b
g h ic d e f
aShut-off valves for water circuit
bOverpressure bypass valve
cGeneral safety precautions
dAddendum book for optional equipment
eIndoor unit installation manual
fOperation manual
gSealing rings for shut-off valves (space heating water circuit)
hSealing rings for field-supplied shut-off valves (domestic hot water circuit)
iSealing tape for low voltage wiring intake
3.3.3 To handle the indoor unit
Use the handles at the back and at the bottom to carry the unit.
b
a a
b
aHandles at the back of the unit
bHandles at the bottom of the unit. Carefully tilt the unit to the back so that the handles become visible.

4 | About the units and options
Installer reference guide
18
ERGA04~08DAV3(A) + EHVZ04+08S18+23DA6V+9W7
Daikin Altherma 3 R F
4P618957-1 – 2020.03
4 About the units and options
4.1 Overview: About the units and options
This chapter contains information about:
▪Identifying the outdoor unit
▪Identifying the indoor unit
▪Combining the outdoor unit with options
▪Combining the indoor unit with options
4.2 Identification
NOTICE
When installing or servicing several units at the same time, make sure NOT to switch
the service panels between different models.
4.2.1 Identification label: Outdoor unit
Location
Model identification
Example: ERGA06DAV3 A
Code Explanation
ER European split outdoor pair heat pump
G Medium water temperature – ambient zone: −10~−20°C
A Refrigerant R32
06 Capacity class
DA Model series
V3 Power supply
A A=Austrian model
[—]=Non-Austrian model

4 | About the units and options
Installer reference guide
19
ERGA04~08DAV3(A) + EHVZ04+08S18+23DA6V+9W7
Daikin Altherma 3 R F
4P618957-1 – 2020.03
4.2.2 Identification label: Indoor unit
Location
Model identification
Example: EHVZ04S18DA6VG
Code Description
E European model
HV Floor-standing indoor unit with integrated tank
Z Dual-zone model
04 Capacity class
S Integrated tank material: Stainless steel
18 Integrated tank volume
DA Model series
6V Backup heater model
G G=Grey model
[—]=White model
4.3 Combining units and options
INFORMATION
Certain options might not be available in your country.
4.3.1 Possible options for the outdoor unit
Drain pan kit (EKDP008D)
The drain pan kit is required to gather the drain from the outdoor unit. The drain
pan kit consists of:
▪Drain pan
▪Installation brackets
For installation instructions, see the installation manual of the drain pan.
Drain pan heater (EKDPH008CA)
The drain pan heater is required to avoid freezing-up of the drain pan.
It is recommended to install this option in colder regions with possible low ambient
temperatures or heavy snowfall.
For installation instructions, see the installation manual of the drain pan heater.
U-beams (EKFT008D)
The U-beams are installation brackets on which the outdoor unit can be installed.

4 | About the units and options
Installer reference guide
20
ERGA04~08DAV3(A) + EHVZ04+08S18+23DA6V+9W7
Daikin Altherma 3 R F
4P618957-1 – 2020.03
It is recommended to install this option in colder regions with possible low ambient
temperatures or heavy snowfall.
For installation instructions, see the installation manual of the outdoor unit.
Low sound cover (EKLN08A1)
In sound sensitive areas (e.g. near a bedroom), you can install the low sound cover
to decrease the operation noise of the outdoor unit.
You can install the low sound cover:
▪On mounting feet to the ground. This must withstand 200kg.
▪On brackets to the wall. This must withstand 200kg.
If you install the low sound cover, you also need to install one of the following
options:
▪Recommended: Drain pan kit (with or without drain pan heater)
▪U-beams
For installation instructions, see the installation manual of the low sound cover.
4.3.2 Possible options for the indoor unit
User interface used as room thermostat (BRC1HHDA)
▪The user interface used as room thermostat can only be used in combination
with the user interface connected to the indoor unit.
▪The user interface used as room thermostat needs to be installed in the room
that you want to control.
For installation instructions, see the installation and operation manual of the user
interface used as room thermostat.
Room thermostat (EKRTWA, EKRTR1)
You can connect an optional room thermostat to the indoor unit. This thermostat
can either be wired (EKRTWA) or wireless (EKRTR1).
For installation instructions, see the installation manual of the room thermostat
and addendum book for optional equipment.
Remote sensor for wireless thermostat (EKRTETS)
You can use a wireless indoor temperature sensor (EKRTETS) only in combination
with the wireless thermostat (EKRTR1).
For installation instructions, see the installation manual of the room thermostat
and addendum book for optional equipment.
Digital I/O PCB (EKRP1HBAA)
The digital I/O PCB is required to provide following signals:
▪Alarm output
▪Space heating On/OFF output
▪Changeover to external heat source
For installation instructions, see the installation manual of the digital I/O PCB and
addendum book for optional equipment.
Demand PCB (EKRP1AHTA)
To enable the power saving consumption control by digital inputs you must install
the demand PCB.